Finishing Tools by DAYTON (103 items)
Key Features:
- Strokes per Minute: 3300
- Item: Engraver
- Switch: On/Off Button
Key Features:
- Item: Engraver
- Strokes per Minute: 3600 and 7200
- Switch: 2 Speed
Key Features:
- Item: Bench Buffer
- Amps: 5
- Voltage: 120V
Key Features:
- Item: Slip Roll
- Application: Designed for Bench or Table Mounting with Front-mounted Handle for Easy Placement and Release of Workpiece, Form Cylinders Reverse Curves and Radius Bends Of Sheet Metal
- Characteristics: Ground And Polished Steel Rolls With Wire Grooves, Large Roll-adjusting Screws Accommodate Wide Range Of Sheet Metal Gauges.
Key Features:
- Fits Brand: DAYTON
- Item: Punch Set, 3pcs, Round, Point, Square
Key Features:
- Item: Machining Shear
- Application: Shears Mild Steel up to 16 ga, Plastic, Lead, Zinc, Aluminum, Brass and Copper
- Capacity of Mild Steel (Gauge): 16
Key Features:
- Item: Replacement Carbide Engraver Bit
- Tool Length: 0.63 in
- Tool Weight: 0.3 lb
Key Features:
- Item: Machining Shear
- Application: Shears Mild Steel up to 16 ga, Plastic, Lead, Zinc, Aluminum, Brass and Copper
- Capacity of Mild Steel (Gauge): 16
Key Features:
- Item: Sheet Metal Brake
- Bending Length (In.): 51 in
- Capacity of Mild Steel (Gauge): 12
Key Features:
- Item: Combination Machine
- Bending Length (In.): 30.25 in
- Cutting Width (In.): 30 in
Key Features:
- Item: Sheet Metal Brake
- Bending Length (In.): 24 in
- Capacity of Mild Steel (Gauge): 20
Key Features:
- Item: Sheet Metal Brake
- Bending Length (In.): 48.25 in
- Capacity of Mild Steel (Gauge): 16
Key Features:
- Promotion Restriction: Not eligible for promotion
- Item: Combination Machine
- Bending Length (In.): 12 in
Key Features:
- Fits Brand: DAYTON
- For Use With Mfr. Model Number: 13W881
- Item: Crank Handles
Key Features:
- Item: Lathe
- Primary Application: Metal Turning
- Motor HP: 1
Key Features:
- Item: Bar and Tube Bender
- Bending Length (In.): 2 in
- Cutting Width (In.): 59/250 in
Key Features:
- Item: Combination Machine
- Bending Length (In.): 40.5 in
- Cutting Width (In.): 40 1/2 in
Key Features:
- Item: Lathe
- Primary Application: Metal Turning
- Motor HP: 5/8
Key Features:
- For Use With Mfr. Model Number: 13W880
- Item: Crimping Roll Dies
- Fits Brand: DAYTON
Key Features:
- Item: Sheet Metal Brake
- Bending Length (In.): 36 in
- Cutting Width (In.): 36 in
Key Features:
- For Use With Mfr. Model Number: 13W878
- Item: Upper Blade
- Fits Brand: DAYTON
Key Features:
- Item: Bench Buffer
- Voltage: 115/240V
- HP: 3/4
Key Features:
- Item: Bench Buffer
- Voltage: 115/240V
- Max. RPM: 1725
Key Features:
- For Use With Mfr. Model Number: 13W878
- Fits Brand: DAYTON
- Item: Lower Blade
Key Features:
- Item: Bar and Tube Roller
- Application: Rolling
- Construction: Cast Steel
Key Features:
- Item: Slip Roll
- Application: Designed for Bench or Table Mounting with Front-mounted Handle for Easy Placement and Release of Workpiece, Form Cylinders Reverse Curves and Radius Bends Of Sheet Metal
- Characteristics: Ground And Polished Steel Rolls With Wire Grooves, Large Roll-adjusting Screws Accommodate Wide Range Of Sheet Metal Gauges.
Key Features:
- Item: English Wheel
- Capacity of Mild Steel (Gauge): 18
- Construction: Steel
Key Features:
- Item: Shrinker-Stretcher
- Capacity of Mild Steel (Gauge): 18
- Application: Shrinking, Stretching
Key Features:
- Item: Replacement HSS Engraver Bit
- Tool Length: 0.63 in
- Tool Weight: 0.3 lb
Key Features:
- Item: Lathe
- Primary Application: Metal Turning
- Motor HP: 1
Key Features:
- Item: Shrinker-Stretcher
- Capacity of Mild Steel (Gauge): 16
- Application: Shrinking, Stretching
Key Features:
- Item: Lathe
- Primary Application: Metal Turning
- Motor HP: 2
Key Features:
- Item: Slip Roll
- Application: Designed for Bench or Table Mounting with Front-mounted Handle for Easy Placement and Release of Workpiece, Form Cylinders Reverse Curves and Radius Bends Of Sheet Metal
- Dia. of Rolls (In.): 3 in
Key Features:
- For Use With Mfr. Model Number: 13W880
- Fits Brand: DAYTON
- Item: Large Turning Roll Dies
Key Features:
- Item: Sheet Metal Brake
- Bending Length (In.): 40 in
- Capacity of Mild Steel (Gauge): 12
Key Features:
- For Use With Mfr. Model Number: 13W877
- Item: Nose Bar, 3
- Fits Brand: DAYTON
About Finishing Tools
Finishing Tools are essential for any project, whether it be a home improvement project or a professional job. Finishing tools are used to give surfaces the desired look and feel that you want, whether it is smooth and polished or rough and textured.
Types of Finishing Tools
There are many different types of finishing tools available for use. Sanding tools like sandpaper, abrasive pads, and power sanders can be used to give surfaces a smoother finish. Polishing supplies such as polishers, buffers, waxes, and polishes can help give surfaces a glossy finish.
Materials used for Finishing Tools
Finishing tools are typically made from materials such as steel, aluminum, plastic, rubber, wood or composites. The type of material used will depend on the application that the tool is being used for.
Industries that use Finishing Tools
Finishing tools are commonly used in industries such as automotive repair shops, furniture makers and woodworking shops. Professionals in these industries use finishing tools to create desired finishes on their products with precision accuracy.
Find the Finishing Tools You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of tools & machining along with other tools or supplies to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time. Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.