- Home
- /
- Pumps
- /
- Centrifugal Pumps
- /
- Straight Centrifugal High Head Pumps
- /
- Centrifugal Pump, 7-1/2 HP, 125 ft. Head
Goulds Water Technology
Centrifugal Pump, 7-1/2 HP, 125 ft. Head
Mfr # 4BF1KBF0
Zoro # G4847949
Item requires special delivery charges. A $150.00 per item surcharge will be applied.
$3,103.99
Item successfully saved to ''
Key Features
- HP - Pumps 7 1/2 hp
- Voltage - Pumps 208 to 240/480V AC
- Phase - Pumps 3
- Housing Material - Pumps Cast Iron
- Inlet Size - Pumps 3 in NPT
Customers Also Purchased
- Brand Goulds Water Technology
-
MFR #
4BF1KBF0
-
Zoro #
G4847949
- UPC # 697666912268
- Country of Origin United States
- Category Straight Centrifugal High Head Pumps
Dimensions
Inlet Size - Pumps | 3 in NPT |
Outlet Size - Pumps | 2-1/2 in NPT |
Max. Dia. Solids | 7/16 in |
Manufacturers Warranty Length | 1 yr |
Solid Diameter (Maximum) | 0.44 in |
Overall Length | 25.5 in |
Overall Width | 8.6 in |
Manufacturer Warranty Length | 1 yr |
Compatible Discharge Pipe Size | 2 1/2 in |
Overall Height | 10.5 in |
Compatible Intake Pipe Size | 3 in |
Intake and Discharge Size | 3 in , 2 1/2 in |
Details
HP - Pumps | 7 1/2 hp |
Voltage - Pumps | 208 to 240/480V AC |
Phase - Pumps | 3 |
Housing Material - Pumps | Cast Iron |
Max. Head | 125 ft |
Max. Pressure - Pumps | 175 psi |
Motor Enclosure - Pumps | Open Dripproof |
Housing Material | Cast iron |
Hz | 60 |
Item - Straight Centrifugal Pumps | Straight Centrifugal High Head Pump |
Seal Material | 316 Stainless Steel, Buna Elastomer, Carbon, Ceramic |
Inlet | 3" NPT |
Best Efficiency GPM @ Head | 195 @ 103 ft |
Outlet | 2-1/2" NPT |
Motor Enclosure | Open Dripproof (ODP) |
Min. GPM @ Head | 50 @ 118 ft |
Wetted Materials | 303 Stainless Steel, Carbon, Cast Iron, Bronze, Ceramic, Buna-N |
Frame | 184JM |
Max. Pressure | 175 psi |
Max. Case Pressure | 175 psi |
Motor RPM | 3,500 RPM |
Motor Type | JM |
Item | Centrifugal Pump |
Voltage | 208-230/460VAC |
Amps | 17.2/8.6 |
Max. Liquid Temp. | 212 Degrees F |
Max. GPM @ Head | 250 @ 90 ft |
Phase | Three |
Best Efficiency Range GPM @ Head | 125 to 275 gpm @ 102 to 60 ft |
HP | 7-1/2 |
Impeller Material | Bronze |
Flow Rate @ 120 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 280 ft of Head (Maximum) | Not Applicable |
Discharge Rotation | 90 Degrees Increments |
Flow Rate @ 300 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
Standards | ANSI 61, NSF Certified |
Minimum Flow Rate | 100 gpm |
Flow Rate @ 10 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 160 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
Compatible with Media Type | Water |
Maximum RPM | 3,500 RPM |
Flow Rate @ 60 ft of Head (Maximum) | Not Applicable |
For Use With Potable Systems | Yes |
Flow Rate @ 100 ft of Head (Maximum) | 200 gpm |
Flow Rate @ 200 ft of Head (Maximum) | Not Applicable |
Features | Back Pull Out to Reduce Maintenance Down Time, Dynamic Balancing, Renewable Wear Rings |
Intake Type | NPT |
Duty Cycle | Continuous |
Best Efficiency Flow | 195 gpm |
Flow Rate @ 140 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 90 ft of Head (Maximum) | 250 gpm |
Pump Housing Material | Cast Iron |
Wetted Material | 316 Stainless Steel, Bronze, Buna-N, Carbon, Ceramic |
Series | 3656 |
Shaft Material | Stainless Steel |
Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 50 ft of Head (Maximum) | Not Applicable |
Discharge Type | NPT |
Flow Rate @ 70 ft of Head (Maximum) | Not Applicable |
Shut Off Pressure (Maximum) | 175 psi |
Flow Rate @ 240 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 15 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 180 ft of Head (Maximum) | Not Applicable |
Pumping Application | Booster Service, Irrigation, Liquid Transfer, Spraying Systems, Water Circulation |
Frequency | 60 Hz |
Nameplate Voltage | 208-230/460V AC |
Motor Frame Designation | 184JM |
Horsepower | 7 1/2 hp |
Maximum Flow Rate | 250 gpm |
Nominal Voltage | 208-230/460V AC |
Maximum Feet of Head | 115 ft |
Flow Rate @ 260 ft of Head (Maximum) | Not Applicable |
Mounting Orientation | Horizontal |
Flow Rate @ 30 ft of Head (Maximum) | Not Applicable |
Seal Type | Mechanical Type 21 |
Flow Rate @ 20 ft of Head (Maximum) | Not Applicable |
Motor Enclosure Type | ODP |
Priming | Manual |
Impeller Design | Closed |
Flow Rate @ 40 ft of Head (Maximum) | Not Applicable |
Best Efficiency Head | 103 ft |
Maximum Media Temperature | 212 Degrees F |
Flow Rate @ 220 ft of Head (Maximum) | Not Applicable |
Description
Centrifugal Pump, Phase Three, Pump Housing Material Cast Iron, Horsepower 7 1/2 hp, Nameplate Voltage 208-230/460V AC, Maximum Feet of Head 115 ft, Compatible Intake Pipe Size 3 in, Intake Type NPT, Compatible Discharge Pipe Size 2 1/2 in, Discharge Type NPT, Motor Enclosure Open Dripproof, Maximum Flow Rate 250 gpm, Flow Rate @ 100 ft of Head (Maximum) 200 gpm, Priming Manual, Seal Material 316 Stainless Steel, Buna Elastomer, Carbon, Ceramic, Best Efficiency Head 103 ft
Explore More Products
- GOULDS WATER TECHNOLOGY Centrifugal Pump, 7-1/2 HP, 109 ft. Head 4BF1K9G0
- GOULDS WATER TECHNOLOGY Cast Iron 1-1/2 HP Centrifugal Pump 208-230/460V 1BF11534
- GOULDS WATER TECHNOLOGY Cast Iron 1 HP Centrifugal Pump 115/230V 1BF21012
- GOULDS WATER TECHNOLOGY Centrifugal Pump, 15 HP, 200 ft. Max. Head 4BF1MBB0
- GOULDS WATER TECHNOLOGY Cast Iron 2 HP Centrifugal Pump 115/230V 1BF22012
- GOULDS WATER TECHNOLOGY Centrifugal Pump, 10 HP, 170 ft. Max. Head 5BF1L9G0
- GOULDS WATER TECHNOLOGY Cast Iron 3 HP Centrifugal Pump 115/208-230V 3BF1H4D0
- GOULDS WATER TECHNOLOGY Cast Iron 10 HP Centrifugal Pump 230V 4BF1L1D0
- GOULDS WATER TECHNOLOGY Cast Iron 7-1/2 HP Centrifugal Pump 230V 6BF1K1E0
- DAYTON Cast Iron 3 HP Centrifugal Pump 208-230/460V 2ZXK3
- DAYTON Cast Iron 3/4 HP Centrifugal Pump 208-230/460V 2ZXJ4
- Goulds Water Technology Straight Centrifugal High Head Pumps