1/2 Tube

Tube Bender, Lever, Centerline Bend Radius 11/16 for 3/16 In. OD, 11/16 For 1/4 In. OD, 1-1/8 For 3/8 In. OD, 1-1/2 In. For 1/2 In. OD, Calibrated Markings for Left, Right And Offset Bends, Handle Type Cushion Grips, Die Cast Aluminum, Adjustable Hook

Male Connector, Application Air, Cutting Fluids, Inert Gases, Vacuum, Fitting Side A Connection Type Push-to-Connect, Fitting Side B Connection Type MBSPT, Fitting Side B Pipe Size 1/8 in, Fitting Side A Tube Outer Diameter 1/4 in, Fitting Material Nylon, Fitting Thread Size 1/8, Color Black, Includes Pre-Applied Thread Sealant Yes, Maximum Operating Pressure 290 psi, Maximum Operating Temperature 175 Degrees F, Overall Length 15/32 in, Specific Fitting Shape Straight Adapter

Tubing, Tube Material PVC, Tube Hardness Shore A: 65, Inside Dia. 3/8 in, Outside Dia. 5/8 in, Wall Thickness 1/8 in, Max. Pressure 140 psi, Tube Length 100 ft, Clear, Tube Bend Radius 5/8 in, Temp. Range -50 Degrees to 150 Degrees F, Standards FDA

The Smoke Tube is used for Respirator Fit Testing and Air Flow Indication and is compatible with standard smoke test kits. It has a break-off tip and tubes made of glass. Included within are 6 tubes and 6 tube caps.

Tube Bender, Lever, Centerline Bend Radius 7/16 In., Handle Type Lever Type, Steel, Tube Bending

Tube Bender, Geared Ratchet, Outside Dia Tubing 5/8 In, Centerline Bend Radius 3 In, Calibration Increments 15 Deg, Overall Length 22 In, Bend Angle Up To 180 Deg, Calibrated Angle Markings From 0 to 180 Degrees, Handle Type Long, Non-cushioned, Cast Aluminum, High Geared Mechanical Ratios, For Steel Up To 1/8 In Wall Thickness, Stainless Steel Up To 3/32 In Wall Thickness, Type K and L Hard Copper Tubes

Tube Stock, Square, Ornamental, Stainless Steel, Alloy Type 304, 1/2 In Outside Square, 3/8 In Inside Square, Wall Thickness 0.065 In, Length 6 ft., Outside Square Tolerance +/-0.015 In, Wall Thickness Tolerance +/-0.100 In, Length Tolerance +/- 1.000 In, Min Temp Rating -425 Deg F, Max Temp 1500 F, Tensile Strength 75, 000 PSI, Impact Strength Not Rated Lbs, Standards ASTM A554

Multipurpose, Clamp, Length 5 in, Diameter 0.5 in, Max. Jaw Opening 4 in, Number of Prongs 3, Material Stainless Steel, Height 6.5 in

Tubing, Round, Material Aluminum, Inside Dia. 0.152 in, Outside Dia. 1/4 in, Length 1 ft, Alloy Type 6061-T6, Wall Thickness 3/64 in, Finish Mill, Wall Thickness Tolerance +/-0.003 in, Length Tolerance +/-0.032 in, Typical Hardness F85, Hardness Scale Rockwell, Standards ASTM B221

Copper Tubing, Tube Material Copper, Tube Size 1/4 in, Inside Dia. 0.25 in, Outside Dia. 3/8 in, Wall Thickness 0.03 in, Max. Pressure 912 psi, Tube Length 5 ft, Copper Tube Type Type L, Copper Tube Shape Straight, Hard, Application Water, Copper Tube Coating None, Temp. Range 100 Degrees F to 400 Degrees F, Standards ASTM B280, ASTM B306, ASTM B819, ASTM B88