Shop Alternate Products
This Product is Discontinued
Banjo
Centrifugal Pump Head, 12900 GPH, 2 In., PP (Discontinued)
Mfr # 205PO
Zoro # G4972642
Free Shipping & Returns
This Product is Discontinued
Key Features
- Inlet 2 in NPT
- Outlet 2" NPT
- Seal Material Carbon Ceramic
- Max. Head 50 ft
- Impeller Material Polypropylene
Customers Also Purchased
- Brand Banjo
-
MFR #
205PO
-
Zoro #
G4972642
- UPC # 791206033298
- Country of Origin United States
- Category Pump Heads
Dimensions
Width | 8-1/2" |
Height | 12-1/2" |
Length | 9-1/2" |
Max. Diameter Solids | Clear Water |
Overall Width | 8 1/2 in |
Discharge Dia. | 2 in |
Overall Length | 9 1/2 in |
Inlet Dia. | 2 in |
Overall Height | 12 1/2 in |
Details
Inlet | 2 in NPT |
Outlet | 2" NPT |
Seal Material | Carbon Ceramic |
Max. Head | 50 ft |
Impeller Material | Polypropylene |
Volute/Wear Plate | Polypropylene |
GPM of Water @ 30 Ft. of Head | 175 |
Engine RPM | 3600 |
Mechanical Seal | EPDM, Carbon Ceramic |
GPM of Water @ 50 Ft. of Head | 150 |
Sensor Type | None |
Material of Construction | Polypropylene |
Roll Bar Frame | None |
Engine/Motor Type | Gas |
Application | General Purpose |
Max. Suction Lift | 15 ft. |
Casing Adapter | Polypropylene |
Impeller Type | Open |
Temp. Range | 32 Degrees to150 Degrees F |
Max. Pressure | 50 psi |
Number of Impellers | 1 |
GPM of Water @ 10 Ft. of Head | 200 |
Item | Centrifugal Pump Head |
Check Valve | EPDM |
GPM of Water @ 20 Ft. of Head | 190 |
GPM of Water @ 40 Ft. of Head | 160 |
Self-Priming | Yes |
Flow Rate @ 40 Ft. of Head | 160 gpm |
Maximum Self-Priming Lift | 12 ft |
Maximum Discharge Pressure | 50 psi |
Frame Material | Polypropylene |
Discharge | 2 in FNPT |
Flow Rate @ 20 Ft. of Head | 190 gpm |
Max. Operating Temp. | 32 Degrees F |
HP | 5 hp |
Impeller Design | Open |
Flow Rate @ 80 Ft. of Head | 90 gpm |
Pump Mechanism | Centrifugal |
Discharge Gender | Female |
Flow Rate @ 10 Ft. of Head | 200 gpm |
Flow Rate @ 60 Ft. of Head | 110 gpm |
Inlet Gender | Female |
Discharge Standard | NPT |
Max. Liquid Temp. | 150 Degrees F |
Compatible Power Source | Gasoline |
Inlet Standard | NPT |
Volute Material | Polypropylene |
Description
Centrifugal Pump Head, HP 5 hp, Compatible Power Source Gasoline, Pump Mechanism Centrifugal, Volute Material Polypropylene, Seal Material Carbon Ceramic, Frame Material Polypropylene, Flow Rate @ 10 Ft. of Head 200 gpm, Flow Rate @ 20 Ft. of Head 190 gpm, Flow Rate @ 40 Ft. of Head 160 gpm, Flow Rate @ 60 Ft. of Head 110 gpm, Flow Rate @ 80 Ft. of Head 90 gpm, Max. Head 50 ft, Maximum Self-Priming Lift 12 ft, Impeller Design Open, Maximum Discharge Pressure 50 psi