Bench Belt Sanders

Flat File, American Pattern, Profile Shape Rectangular, Cut Type Bastard, Length 10 in, Natural, Width 1 in, Thickness 1/4 in, Single Cut Edges, 21 Teeth per Inch, General Purpose

Spring Return Hose Reel, Air, Water, 300 psi, Hose Capacity 50 ft (3/8 in I.D.), Drive Type Spring Return, Enclosed No, Includes Hose Yes, Hose Inside Dia. 3/8 in, Hose Length 50 ft, Reel Material Steel, Mounting Location Bench, Ceiling, Wall, Speed Limited Retraction No, Overall Height 22 in, Overall Length 20 in, Overall Width 9 in, Corrosion-Resistant Yes, Hose Color Red, Hose Cover Material Rubber, Hose Fitting A Gender Male

Belt & Disc Sander, 1/3 HP, Voltage 115 V, 6.5 Amps AC, 1 Phase, Disc Dia. (In.) 8, Disc Speed (RPM) 1725, Belt Size (In.) 1 x 42, Belt SFPM 3000, Disc Table Size (In.) 4 x 10, Table Work Surface (In.) 6-1/8 x 7-1/8, Disc Table Tilt-In Angle (Deg.) 45, Disc Table Tilt-Out Angle (Deg.) 45, Belt Table Tilt Angle (Deg.) 45, Dust Collection Port Size (In.) 1-1/4, Overall Width (In.) 22, Overall Depth (In.) 21, Overall Height (In.) 14

Bench Oscillating Sander, 7.5 A, 1/2 HP, Voltage 110, 7.5 Amps AC, 60 Hz, 30 Strokes per Minute, Table Work Surface (In.) 14-1/2x14-1/2, Overall Width (In.) 11-3/4, Overall Height (In.) 18-3/4, Table Material Cast Iron/Metal, Includes (4) Non to Skid Rubber Feet and 1/4 in., 1/2 in., 5/8 in., 1 to 1/2 in., 2 in. Spindle Assemblies with 100 Grit Paper

Dead Blow Hammer, Head Material Urethane over Steel, Head Weight 48 oz, Face Diameter 2 7/16 in, Handle Material Fiberglass with Nonslip Grip, Overall Length 14 in, Tether Style Standard Tool (Accessory Needed for Tethering), Nonsparking Yes, Replaceable Tip No, Handle Color Orange, Head Color Orange, Head Length 4 5/8 in, Features Nonsparking

Belt/Disc Sander, 1/3 HP, Voltage 120, 3.5 Amps AC, 1 Phase, 60 Hz, Disc Dia. (In.) 6, Disc Speed (RPM) 3500, Belt Size (In.) 2 x 42 and 1 x 42, Belt SFPM 4400, Idler Drum Size (In.) -, Disc Table Size (In.) 5-1/2 x 8-1/4, Table Work Surface (In.) 6-3/4 x 9, Disc Table Tilt-In Angle (Deg.) 0, Disc Table Tilt-Out Angle (Deg.) 45, Belt Table Tilt Angle (Deg.) 0 to 90, Platen Size (In.) 6 5/8 X 16 7/8, Dust Collection Port Size (In.) 1-1/2, Table Material Cast Aluminum, Overall Width (In.) 13

Belt/Disc Sander, 1 HP, Voltage 115, 15.0/7.5 Amps AC, 1 Phase, 60 Hz, Disc Dia. (In.) 10, Disc Speed (RPM) 2100, Belt Size (In.) 6 x 48, Belt SFPM 1650, Idler Drum Size (In.) -, Disc Table Size (In.) 7-1/2 x 13, Table Work Surface (In.) 6 x 10-1/2, Disc Table Tilt-In Angle (Deg.) 20, Disc Table Tilt-Out Angle (Deg.) 45, Belt Table Tilt Angle (Deg.) 0 to 90 Degrees , Platen Size (In.) 6 1/4 x 14 3/4, Dust Collection Port Size (In.) 3, Table Material Cast Iron, Overall Width (In.) 23

Disc Sander, Cast Aluminum Table, 1 HP

Belt Grinder, 3/4HP, 120/240V, 7/3.5A, 2x48

Belt and disc sanders are used to shape and finish wood and other materials. Here are some important details for Dayton Disc Sander. Voltage: 120, Hp: 1/2, Phase: 1.

Cotter Pin, System of Measurement Inch, Cotter Pin Type Hairpin, Cotter Pin Style Extended Prong, Basic Material Steel, Fastener Finish Zinc Plated, Pin Dia. 5/64 in, Fastener Length 1 7/16 in, Fits Shaft Dia. 5/16 to 3/8 in, Meets/Exceeds ANSI/ASME B 18.8.1, Package Quantity 100