Save 20% on Garage Tools & Equipment! We’re here to help! Call (855) 289-9676
0 Cart

Blowing Tool

Count on great prices, fast shipping and friendly service every time you order a blowing tool from Zoro.

Featured Product

Cabinet,Woodworking Tool Storage,60"
$2,188.46
qty
  • The A7000 table has the same construction as our standard table with the exception of adjustable legs. The aprons are solid oak or maple (your choice). Legs can adjust from sitting height of 30" to standing height of 36" by removing the bolt on the leg surface. Available in four types of tops: epoxy, phenolic resin, plastic laminate, and ChemGuard. The table is finished with a chemical resistant finish.1 1/4" Plastic Laminate Table Surface2-1/4" solid square legs, with 5/16" hanger bolts installed, supplied nuts and washers.24"D x 60"W x 30"-36"HAprons are 13/16"D x 4-1/2"H with heavy-duty 13 gauge steel corner braces.Diversified Woodcrafts Inc. is SEFA compliant and MAS Certified Green. Equipped with non-skid adjustable glides for precise leveling and rubber leg bootsLegs can adjust from sitting height of 30" to standing height of 36" Limited Lifetime WarrantyMade in the USAMinimal assembly required; legs need to be attached.

  • View Full Product Details

Shop Blowing Tool

  • 10-1/2" Heavy Duty Quick Action Woodworking Vise
    $138.59
    qty
    • 10.5 Woodworking Quick Action vise DQ-11. The body and front plates are manufactured from close grain cast iron. Each vise has an accurately machined housing for smooth sliding movement and true parallel action of side or cross movement. The main Steel screw has buttress thread for smooth and responsive adjustment, along with guide rods. The guide rods and handle are chrome plated to resist corrosion. This vise is equipped with a quick release mechanism that is very useful for repetitive work situations Jaw Width is 10.5 (265mm) and Jaw Opening is 11.5 (290mm). Vise is equipped with adjustable heavy duty plastic front dog which allows over size work pieces to be secured. Vise mounts below bench surface. Mounting hardware not included.

    • View Full Product Details

  • Cabinet,Woodworking Tool Storage,48"
    $1,956.38
    qty
    • The instructor's desk is constructed of solid oak, oak and hardwood veneers, this unit serves as a complete demonstration center offering a spacious work surface. The dovetailed drawers operated smoothly on epoxy coated steel glides with nylon bearings. The top is 1" black epoxy resin. Unit includes GFI protected AC duplex receptacle, and locks for cupboard and all five drawers.1" black epoxy resin top96"W x 30"D x 36"HConstructed of solid oak and oak veneersDesk is finished with an earth-friendly chemical resistant UV finishDiversified Woodcrafts Inc. is SEFA compliant and MAS Certified GreenEpoxy coated steel glides with nylon bearingsGFI protected AC duplex receptacleInclude locks for the drawers and doorsLimited Lifetime WarrantyMade in the U.S.A.

    • View Full Product Details

  • Vise,Woodworking,Up to 3"
    $311.18
    qty
    • Four student double faced workstation that provides a fully equipped science center. Unit is constructed of solid oak, oak and hardwood veneers with 1" black phenolic resin top. Unit includes a sink, two cold water/gas fixtures, two GFI protected AC duplex receptacles, two rod sockets and four book compartments. Each cabinet has four drawers and a cupboard compartment. All drawers and doors lock.1" Solid phenolic resin surface66"W x 48"D x 36"HConstructed of solid oak and oak hardwood veneersDiversified Woodcrafts Inc. is SEFA compliant and MAS Certified GreenFour student double faced workstation that provides a sink, two multiservice fixtures, two GFI protected AC duplex receptacles and two rod socketsIncludes four book compartments in the apronsLimited Lifetime WarrantyMade in the U.S.A.The cabinets have four locking drawers and a locking cupboard with shelf The unit is finished with a chemical resistant, earth-friendly UV finish, rubber base molding and leg boots

    • View Full Product Details

  • 6-1/2" Woodworking Vise
    $34.66
    qty

  • Tool Sharpener,Worksharp WS3000
    $199.95
    qty

  • Mrpls Woodwrkng Csb Chisel,PogPc
    $484.63
    qty

  • 9" Heavy Duty Woodworking Quick Action Vise
    $159.49
    qty
    • 9 Woodworking Quick Action Vice DQ-9. The body and front plates are manufactured from close grain cast iron. Each vise has an accurately machined housing for smooth sliding movement and true parallel action of side or cross movement. The main Steel screw has buttress thread for smooth and responsive adjustment, along with guide rods. The guide rods and handle are chrome plated to resist corrosion. This vise is equipped with a quick release mechanism that is very useful for repetitive work situations Jaw Width is 9 (225mm) and Jaw Opening is 10 (250mm). Vise is equipped with adjustable heavy duty plastic front dog which allows over size work pieces to be secured. Vise mounts below bench surface. Mounting hardware not included.

    • View Full Product Details

  • $212.89
    qty
    • Whether you're building cabinets, shaving down a door or doing floor work, the right bench vises make any project easier and safer. Here are some important details for Wilton Woodworking Vise. Material: Semi Steel Casting, Overall Width: 10-1/4".

    • View Full Product Details

  • 6" Light Duty Woodworking Vise
    $34.99
    qty
    • Portable 6 Wood Working Vise. (P6) Clamps to bench top of maximum thickness of 2.25. Manufactured with 4 pre drilled holes to secure to work bench to enhance stability. Jaws face measure 2 tall by 6 wide. Max jaw opening is 5 Vise Jaws and Body made from close- grained cast iron. Main screw has ACME threads with chrome plated dual slide bars. Prefect for beginner woodworks and hobbyist.

    • View Full Product Details

  • 10",50-Teeth Laser Cut Circular Saw Blade,PK3
    $132.24
    qty

  • Woodworking Glue Stick,PK12
    $8.83
    qty