Cdi Control Devices Cs25-100

Unloader Check Valve, Inlet (In.) 3/8 OD, Outlet (In.) 1/4 (M)NPT, Brass, Max. Pressure (PSI) 250 psi, Hex Size (In.) 3/4 in, Flow Range Free Air (CFM) 1 to 6, Max. Temp. (F) 450 Degrees F, Vertical or Horizontal Mounting, Length (In.) 1 9/16 in, Stainless Steel Spring Material, Brass Poppet, Thread Coating 516 Dry Tape Thread Sealant, PTFE Seal, For Small Air Compressors

Cold Start Valve, Air, Inlet (In.) 1/8, Brass, Hold Back Pressure (PSI) 25, Max. Pressure (PSI) 250 psi, Hex Size (In.) 7/16 in, Flow Range Free Air (CFM) 0 to 1, Max. Temp. (F) 250 Degrees F, In Tank Mounting, Length (In.) 5/8 in, Stainless Steel Spring Material, Brass Poppet, Fluorocarbon Seal, Air Relief

Unloader, Inlet (In.) 1/4 (F)NPT, Outlet (In.) 1/4 (M)NPT, Brass, Max. Pressure (PSI) 250 psi, Hex Size (In.) 3/4 in, Flow Range Free Air (CFM) 1 to 6, Max. Temp. (F) 450 Degrees F, Vertical or Horizontal Mounting, Length (In.) 1 3/4 in, Stainless Steel Spring Material, Brass Poppet, Thread Coating Vibra Seal, PTFE Seal, For Small Air Compressors

Compressor Tank Check Valve, 1/2 In. MNPT

Check Valve, Male, Inlet (In.) 1/4 NPT, Outlet (In.) 1/4 NPT, Nickle Brass, Cracking Pressure (PSI) 3, Hex Size (In.) 669/1000 in, Max. Temp. (F) 160 Degrees F, Horizontal Mounting, Length (In.) 1 1/4 in, Steel Spring Material, NBR Seal

Check Valve, In Tank, Inlet (In.) 3/4 Inverted Flare, Outlet (In.) 3/4 (M)NPT, Brass, Max. Pressure (PSI) 500 psi, Cracking Pressure (PSI) 1, Hex Size (In.) 1 1/4 in, Flow Range Free Air (CFM) 0 to 30, Max. Temp. (F) 450 Degrees F, In Tank Mounting, Length (In.) 2 7/8 in, Stainless Steel Spring Material, Glass Filled PTFE Poppet, Air Compressors

Compressor Tank Check Valve, 3/4 In. NPT

Item - Check Valves Check Valve, Flow Design Single, Mechanism and Body Design Inline Ball Cone, Body Material - Valves Stainless Steel, Pipe or Tube Size - Check Valves 1/2 in, Connection Type - Check Valves FNPT x FNPT, Cracking Pressure - Check Valves 0.5 psi, Mounting Orientation - Check Valves Horizontal, Vertical, Seal Material - Check Valves EPDM, Max. Temp. - Valves 180 Degrees F, Min. Temp. - Valves 33 Degrees F, Max. Water Pressure - Valves 400 psi

Digital Pressure Gauge, 1000 PSI MG-MD, Dial Size 3 In., Range 0-1000, Connection Size 1/4-18 NPT W/22 MM HEX 316L Stainless Steel, Connection Location Bottom, Accuracy Full Scale +\- 0.25 %, 304L Stainless Steel Socket Material, ABS Thermoplastic Case Material, Black Case Color, 4 Digit LCD Display, PSI, BAR and MPA Display Units, Powered By 12Vdc, Agency Compliance ROHS, Operating Temp. Range (F) -10 Degrees C TO +60 Degrees C/+14 Degrees F TO +140 Degrees F, MG-MD Series, Availabe Separately

Item - Check Valves Check Valve, Flow Design Single, Mechanism and Body Design Inline Swing, Body Material - Valves PVC, Pipe or Tube Size - Check Valves 1 1/4 in or 1 1/2 in, Connection Type - Check Valves Clamp x Clamp, Mounting Orientation - Check Valves Horizontal, Vertical, Seal Material - Check Valves Neoprene, Max. Temp. - Valves 130 Degrees F, Max. Water Pressure - Valves 4.30 psi @ 130 Degrees F, Max. Steam Pressure - Valves Not Rated, Seat Material - Check Valves PVC

Item - Check Valves Check Valve, Flow Design Single, Mechanism and Body Design Inline Ball Cone, Body Material - Valves Nylon, Pipe or Tube Size - Check Valves 1/4 in, Connection Type - Check Valves Barb x Barb, Cracking Pressure - Check Valves 1.0 psi, Mounting Orientation - Check Valves Horizontal, Vertical, Seal Material - Check Valves Buna-N, Max. Temp. - Valves 140 Degrees F, Min. Temp. - Valves -20 Degrees F, Max. Water Pressure - Valves 125 psi, Max. Steam Pressure - Valves Not Rated