Skip to Main Content
customer-service Help

Dart Controls 55Ac10E

If you need a dart controls 55ac10e we have them at everyday low prices.

Shop Dart Controls 55Ac10E

$63.20

Adjustable Speed AC Motor Control, Input Voltage 120, Output Voltage 120, 60/50 Hz, Max Amps 2.5, 1/4 HP Max, Length 2 In, Width 1 1/2 In, Depth 1 3/32 In, For Use With Universal, Shaded Pole and PSC Motors on Fans, Blowers, Pumps, Vibratory Feeders, Heating and Lighting, Features Controls Most Single Phase AC Motors and Restrictive Loads, Not Equipped to Handle Capacitor Start Motors, Includes Knob, Dial Plate, Speed Pot with On/Off Switch, 2 Leads with Bare Ends

View Full Product Details
$191.20

This adjustable AC voltage supply is designed for use with universal, shaded pole, and PSC motors for fans, blowers, pumps, and vibratory feeders, or for resistive loads such as heating and lighting. A variety of features are available to help you control the unit, including an 18 in power cord with plug, an 8 in power cord with female receptacle, and a front access fuse protection. There's also a power indicator lamp and a power on/off switch.

View Full Product Details
$199.20

Variable AC Voltage Supply, Input Voltage 240VAC, Voltage Output 240VAC, 50/60 Hz, Max. Amps 15.0, 2-1/2 HP, Length (In.) 5.53, Width (In.) 4, Depth (In.) 3.8, For Use With Universal, Shaded Pole and PSC Motors for Fans, Blowers, Pumps, and Vibratory Feeders, or for resistive loads such as Heating and Lighting., Features Power On/Off Switch, Power Indicator Lamp, 60 In. input/output Power Cords prepped for 240Volt male/female connectors, and Front Access Fuse Protection

View Full Product Details
$343.20

The DC Speed Control is the ideal solution for controlling DC motors in a variety of applications, including material handling, laboratory, food processing, pump, fan/blower, conveyor, machine tool, DC motor and spooling applications. The speed potentiometer knob and dial plate are adjustable, and the speed control accepts tach feedback. The controller features an adjustable IR compensation that can be used to compensate for IR drop in the system. This speed control comes with a surface mount and includes a speed potentiometer knob, dial plate and an on/off switch.

View Full Product Details
$652.60

DC Speed Control, Enclosure NEMA 1, Max. Amps 10 A, Voltage Output 0 to 90/180V DC, Speed Range 50:1, Rotation Reversable, External Switches FWD/OFF/REV, AC Input Voltage 120/240V AC, DC Speed Control SCR, HP @ Lower Volts 1/4 to 1, HP @ Higher Volts 1/2 to 2, Linear Acceleration Fixed, Linear Deceleration Fixed, Current/Torque Limit Adjustable, Speed Regulation +/-1 Percent of Motor Base Speed, Accepts Tach Feedback No, Dynamic Braking No, Power On Light Yes, IR Compensation Adjustable

View Full Product Details
$256.39

AC/DC Gearmotor, Gearmotor Voltage 115V AC/DC, Full Load Torque 250 in-lb, Single Right Gearmotor Shaft Type, Nameplate RPM 4.5 RPM, Insulation Class B, All Angle Gearmotor Mounting Position, 60/50 Hz Hz, 1 Gearmotor Phase, Overhung Load 100 lb, Input HP 1/15, Gear Ratio 1714:1, Full Load Amps 1.1 A, Open Gearmotor Enclosure, None Thermal Protection, Motor Type Universal, Unpainted Finish, Die Cast Zinc Housing Material, Replacement Brushes 1YNR3

View Full Product Details
$175.20

DC Speed Control, Enclosure NEMA 4/12, Max. Amps 3 A, Voltage Output 0 to 90/180V DC, Speed Range 25:1, Rotation Single Direction, External Switches ON/OFF, AC Input Voltage 120/240V AC, DC Speed Control SCR, HP @ Lower Volts 1/50 to 1/3, HP @ Higher Volts 1/25 to 2/3, Linear Acceleration Fixed 0.5 sec, Current/Torque Limit None, Speed Regulation +/-1 Percent of Base Speed, Shunt Wound Volts 100/200V DC, Accepts Tach Feedback No, Dynamic Braking No, IR Compensation Adjustable

View Full Product Details
$263.20

DC Speed Control, Enclosure Chassis, Max. Amps 10 A, Voltage Output 0 to 90/180V DC, Speed Range 50:1, Rotation Reversable, External Switches None, AC Input Voltage 120/240V AC, DC Speed Control SCR, HP @ Lower Volts 1/8 to 1, HP @ Higher Volts 1/4 to 2, Linear Acceleration Adjustable 0.5 to 8 sec, Current/Torque Limit Adjustable, Speed Regulation +/-1 Percent with Armature Voltage Feedback, +/-0.5 Percent with Tach Feedback, Shunt Wound Volts 100/200V DC, Accepts Tach Feedback Yes

View Full Product Details
$559.20

DC Speed Control, Enclosure NEMA 4X, Max. Amps 5 A, Voltage Output 0 to 90/180V DC, Speed Range 50:1, Rotation Single Direction, External Switches None, AC Input Voltage 120/240V AC, DC Speed Control SCR, HP @ Lower Volts 1/50 to 1/2, HP @ Higher Volts 1/25 to 1, Linear Acceleration Adjustable 2 to 4 sec, Linear Deceleration Adjustable 2 to 4 sec, Current/Torque Limit None, Speed Regulation +/-1/2 RPM of Set Speed, Accepts Tach Feedback Yes, Dynamic Braking No, Power On Light No

View Full Product Details