Dayton 1F794

DC Speed Control, Enclosure NEMA 1, Max. Amps 2 A, Voltage Output 0 to 90V DC, Speed Range 25:1, Rotation Single Direction, External Switches ON/OFF, AC Input Voltage 120V AC, DC Speed Control SCR, HP @ Lower Volts 1/50 to 1/6, Linear Acceleration Fixed 0.5 sec, Current/Torque Limit None, Speed Regulation +/-1 Percent of Motor Base Speed, Accepts Tach Feedback No, Dynamic Braking No, Power On Light No, IR Compensation Adjustable, Height 6 in, Depth 6.38 in, Width 6 in

DC Speed Control, Enclosure NEMA 1, Max. Amps 10 A, Voltage Output 0 to 90/180V DC, Speed Range 50:1, Rotation Reversable, External Switches FWD/OFF/REV, AC Input Voltage 120/240V AC, DC Speed Control SCR, HP @ Lower Volts 1/4 to 1, HP @ Higher Volts 1/2 to 2, Linear Acceleration Fixed, Linear Deceleration Fixed, Current/Torque Limit Adjustable, Speed Regulation +/-1 Percent of Motor Base Speed, Accepts Tach Feedback No, Dynamic Braking No, Power On Light Yes, IR Compensation Adjustable

DC Speed Control, Enclosure IP30, Max. Amps 3 A, Voltage Output 0 to 90V DC, Speed Range 15:1, Rotation Single Direction, External Switches None, AC Input Voltage 120V AC, DC Speed Control SCR, HP @ Lower Volts 1/35 to 1/6, Current/Torque Limit Adjustable, Speed Regulation 10 to 30 Percent, Accepts Tach Feedback Yes, Power On Light No, IR Compensation None, Follower Circuit No, Mount Type Motor Endbell, Height 3.6 in, Depth 3.19 in, Width 2.61 in, Operating Temp. 0 Degrees to 40 Degrees C

DC Speed Control, Enclosure NEMA 4X, Max. Amps 5 A, Voltage Output 0 to 90/180V DC, Speed Range 50:1, Rotation Single Direction, External Switches None, AC Input Voltage 120/240V AC, DC Speed Control SCR, HP @ Lower Volts 1/50 to 1/2, HP @ Higher Volts 1/25 to 1, Linear Acceleration Adjustable 2 to 4 sec, Linear Deceleration Adjustable 2 to 4 sec, Current/Torque Limit None, Speed Regulation +/-1/2 RPM of Set Speed, Accepts Tach Feedback Yes, Dynamic Braking No, Power On Light No

Electronic Potentiometer, Digital, For Use With New and Existing AC or DC Drive Systems Where Precise, Repeatable Speed Setting and Digital Readout are Desired, and Where High Vibration and Other Environmental Factors Can Cause Normal Speedpot Settings to Drift, Input Voltage 85 to 265V AC, LED Display, Voltage Output 0 to 24V DC, Includes Gasket Kit for NEMA 4X Panel Installation

DC Speed Control, Enclosure Chassis, Max. Amps 10 A, Voltage Output 0 to 90/180V DC, Speed Range 50:1, Rotation Reversable, External Switches None, AC Input Voltage 120/240V AC, DC Speed Control SCR, HP @ Lower Volts 1/8 to 1, HP @ Higher Volts 1/4 to 2, Linear Acceleration Adjustable 0.5 to 8 sec, Current/Torque Limit Adjustable, Speed Regulation +/-1 Percent with Armature Voltage Feedback, +/-0.5 Percent with Tach Feedback, Shunt Wound Volts 100/200V DC, Accepts Tach Feedback Yes

DC Speed Control, Enclosure Chassis, Max. Amps 15 A, Voltage Output 0 to 90/180V DC, Speed Range 50:1, Rotation Single Direction, External Switches None, AC Input Voltage 120/240V AC, DC Speed Control SCR, HP @ Lower Volts 1/8 to 1-1/2, HP @ Higher Volts 1/4 to 3, Linear Acceleration Adjustable 0.3 to 12 sec, Linear Deceleration Adjustable 0.6 to 12 sec, Current/Torque Limit Adjustable, Speed Regulation +/-1 Percent with Armature Voltage Feedback, +/-0.5 Percent with Tach Feedback

The DC Speed Control is the ideal solution for controlling DC motors in a variety of applications, including material handling, laboratory, food processing, pump, fan/blower, conveyor, machine tool, DC motor and spooling applications. The speed potentiometer knob and dial plate are adjustable, and the speed control accepts tach feedback. The controller features an adjustable IR compensation that can be used to compensate for IR drop in the system. This speed control comes with a surface mount and includes a speed potentiometer knob, dial plate and an on/off switch.

Computer Workstation, (3)Shelf, Adj Height

Adjustable Speed Control, Internal Unit Mount, Voltage 120, Max. Amps 3, Max. Wattage -, Switch Color -, Plate Color Galvanized, Height (In.) -, Width (In.) -, Depth (In.) -, Fits -, For Use With Broan LoSone Select Insulated and In-Line Ventilators, UL Listed, Includes Control Knob and Switch Plate

Chain Hoist, Load Capacity 500 lb, Hoist Lift 10 ft, Classification H2, Number of Speeds 1, Lift Speed 7 fpm, Motor HP 0.16 hp, Voltage 115, 1 Phase, Min. Between Hooks 16 in, 3 A Amps @ Low Volts, Housing Depth 4 5/8 in, Housing Length 14 1/4 in, Housing Width 6 in, Reeving 1, Brake Electric Disc Motor, Clutch Overload Limiting, Control Push Button Pendant, Control Cord 6 ft, Red, Finish Powder Coated, 60 Hz, Lubrication Grease, Thermal Protection Yes