Dayton 1Lpw3

Exhaust Ventilator, Blade Dia. 36 in, Sones @ 0.125-In. SP @ 5 Ft. -, Phase -, Propeller Material Steel, Max. Inlet Temp. (Deg. F) 120 Degrees F, Roof Mounting Location, Base Height (In.) 1 3/4 in

DC Permanent Magnet Motor, Motor Design Permanent Magnet DC, 1/2 HP, Nameplate RPM 1, 750, Voltage 90V DC, 5.0 A Full Load Amps, 56C Frame, Full Load Torque 18 in-lb, Motor Service Factor 1, Motor Thermal Protection None, Ins. Class F, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CW/CCW, Duty Cycle Continuous, Motor Enclosure Design Totally Enclosed Fan-Cooled, Motor Mounting Type Face, Base, Removable Base Yes, Shaft Dia. 5/8 in, Motor Bearings Ball, Shaft Length 1 7/8 in

DC Permanent Magnet Motor, Motor Design Permanent Magnet DC, 1/35 HP, Nameplate RPM 2, 350, Voltage 12V DC, 3.8 A Full Load Amps, Non-Standard Frame, Motor Thermal Protection None, Ins. Class A, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Totally Enclosed Nonventilated, Motor Mounting Type Stud, Shaft Dia. 1/4 in, Motor Bearings Sleeve, Shaft Length 1 in, Overall Length 4 7/8 in, Length Less Shaft 3 7/8 in

Machine Screw, Head Type Round, Material Steel, Finish Zinc Plated, Drive Phillips, Thread Size #6-32, Fastener Length 3/8 in, Head Width 0.262 in, Head Height 0.26 in, Drive Size #2, Tensile Strength 60, 000 psi, Dimensional Standards ASME B18.6.3, Pack Size Small, Minimum Thread Length Not Applicable, Type Standard Machine Screw, Washer Outside Diameter Not Applicable, Washer Thickness Not Applicable, Maximum Head Width 0.262 in, Minimum Head Width 0.238 in, Maximum Head Height 0.26 in

DC Permanent Magnet Motor, Motor Design Permanent Magnet DC, 1/27 HP, Nameplate RPM 1, 800, Voltage 90V DC, 0.50 A Full Load Amps, Non-Standard Frame, Full Load Torque 1.3 in-lb, Motor Thermal Protection None, Ins. Class B, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Totally Enclosed Nonventilated, Motor Mounting Type Face, Base, Shaft Dia. 5/16 in, Motor Bearings Ball, Shaft Length 1 1/2 in, Brush Type External, Overall Length 6 7/16 in

The Dayton 6K778 Split-Phase Belt Drive Motor is the perfect solution for belt drive fans and blowers. This split-phase motor has a 1/2 in. shaft diameter, which makes it compatible with most fan/blower applications. The open dripproof motor enclosure design protects against water, oil, dirt and other contaminants. With a 115V AC voltage, this belt drive motor is ideal for use in factories or warehouses where heavy duty equipment is used. It features one speed with a 1, 701 to 1, 800 RPM range. If you are looking for an efficient belt drive fan or blower motor that will not let you down during your next project, then look no further than the Dayton 6K778 Split Phase Belt Drive Motor.

DC Gearmotor, Gearmotor Voltage 12V DC, Max. Torque 40 in-lb, Single Gearmotor Shaft Type, Nameplate RPM 12 RPM, Totally Enclosed Nonventilated Gearmotor Enclosure, All Angle Gearmotor Mounting Position, Motor Shaft Design Flat, Overhung Load 30 lb, Input HP 1/125, Gear Ratio 594.4:1, Full Load Amps 1.3 A, Insulation Class B, None Thermal Protection, Motor Type Permanent Magnet DC, Unpainted Finish

DC Gearmotor, Gearmotor Voltage 90V DC, Max. Torque 250.0 in-lb, Single Gearmotor Shaft Type, Nameplate RPM 8.7 RPM, Totally Enclosed Nonventilated Gearmotor Enclosure, All Angle Gearmotor Mounting Position, Overhung Load 150 lb, Input HP 1/20, Gear Ratio 208:1, Full Load Amps 0.53 A, None Thermal Protection, Motor Type Permanent Magnet DC, Replacement Brushes 6YHY3

DC Gearmotor, Gearmotor Voltage 90V DC, Max. Torque 77.0 in-lb, Single Gearmotor Shaft Type, Nameplate RPM 94 RPM, Totally Enclosed Nonventilated Gearmotor Enclosure, All Angle Gearmotor Mounting Position, Overhung Load 150 lb, Input HP 1/8, Gear Ratio 19:1, Full Load Amps 1.41 A, None Thermal Protection, Motor Type Permanent Magnet DC, Replacement Brushes 6YHY6

DC Permanent Magnet Motor, Motor Design Permanent Magnet DC, 1/4 HP, Nameplate RPM 1, 750, Voltage 90V DC, 2.5 A Full Load Amps, 56C Frame, Full Load Torque 9 in-lb, Motor Service Factor 1, Motor Thermal Protection None, Ins. Class F, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CW/CCW, Duty Cycle Continuous, Motor Enclosure Design Totally Enclosed Fan-Cooled, Motor Mounting Type Face, Base, Removable Base Yes, Shaft Dia. 5/8 in, Motor Bearings Ball, Shaft Length 1 7/8 in

DC Permanent Magnet Motor, Motor Design Permanent Magnet DC, 1 HP, Nameplate RPM 1, 750, Voltage 180V DC, 5.0 A Full Load Amps, 56C Frame, Full Load Torque 36 in-lb, Motor Service Factor 1, Motor Thermal Protection None, Ins. Class F, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CW/CCW, Duty Cycle Continuous, Motor Enclosure Design Totally Enclosed Fan-Cooled, Motor Mounting Type Face, Base, Removable Base Yes, Shaft Dia. 5/8 in, Motor Bearings Ball, Shaft Length 1 7/8 in