Dayton 1Lpw5

DC Gearmotor, Gearmotor Voltage 90V DC, Max. Torque 50.0 in-lb, Single Gearmotor Shaft Type, Nameplate RPM 11 RPM, Totally Enclosed Nonventilated Gearmotor Enclosure, All Angle Gearmotor Mounting Position, Overhung Load 50 lb, Input HP 1/30, Gear Ratio 273:1, Full Load Amps 0.35 A, Insulation Class F, None Thermal Protection, Motor Type Permanent Magnet DC, Unpainted Finish, Replacement Brushes 6YHY3

DC Gearmotor, Gearmotor Voltage 90V DC, Max. Torque 26.0 in-lb, Single Gearmotor Shaft Type, Nameplate RPM 47 RPM, Totally Enclosed Nonventilated Gearmotor Enclosure, All Angle Gearmotor Mounting Position, Overhung Load 50 lb, Input HP 1/30, Gear Ratio 62:1, Full Load Amps 0.35 A, Insulation Class F, None Thermal Protection, Motor Type Permanent Magnet DC, Unpainted Finish, Replacement Brushes 6YHY3

The Dayton 6K778 Split-Phase Belt Drive Motor is the perfect solution for belt drive fans and blowers. This split-phase motor has a 1/2 in. shaft diameter, which makes it compatible with most fan/blower applications. The open dripproof motor enclosure design protects against water, oil, dirt and other contaminants. With a 115V AC voltage, this belt drive motor is ideal for use in factories or warehouses where heavy duty equipment is used. It features one speed with a 1, 701 to 1, 800 RPM range. If you are looking for an efficient belt drive fan or blower motor that will not let you down during your next project, then look no further than the Dayton 6K778 Split Phase Belt Drive Motor.

Universal AC/DC Motor, Single Phase, Motor Design Universal AC/DC, 1/4 HP, Nameplate RPM 19, 500, No. of Speeds 1, 115V AC Voltage, Non-Standard Frame, Usable @ 208V No, Usable @ 200V No, 60 Hz, Motor Service Factor 1, Motor Thermal Protection One-Shot, Ins. Class A, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CCW, Motor Enclosure Design Open, Motor Mounting Type Hole, Motor Mounting Position All Angle, Finish Enamel, Shaft Dia. 5/16 in, Shaft Length 1 3/16 in, Motor Shaft Design Round

DC Permanent Magnet Motor, Motor Design Permanent Magnet DC, 1/2 HP, Nameplate RPM 1, 750, Voltage 90V DC, 5.0 A Full Load Amps, 56C Frame, Full Load Torque 18 in-lb, Motor Service Factor 1, Motor Thermal Protection None, Ins. Class F, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CW/CCW, Duty Cycle Continuous, Motor Enclosure Design Totally Enclosed Fan-Cooled, Motor Mounting Type Face, Base, Removable Base Yes, Shaft Dia. 5/8 in, Motor Bearings Ball, Shaft Length 1 7/8 in

DC Permanent Magnet Motor, Motor Design Permanent Magnet DC, 1/35 HP, Nameplate RPM 2, 350, Voltage 12V DC, 3.8 A Full Load Amps, Non-Standard Frame, Motor Thermal Protection None, Ins. Class A, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Totally Enclosed Nonventilated, Motor Mounting Type Stud, Shaft Dia. 1/4 in, Motor Bearings Sleeve, Shaft Length 1 in, Overall Length 4 7/8 in, Length Less Shaft 3 7/8 in

DC Gearmotor, Gearmotor Voltage 12V DC, Max. Torque 41 in-lb, Single Gearmotor Shaft Type, Nameplate RPM 8.8 RPM, Totally Enclosed Nonventilated Gearmotor Enclosure, All Angle Gearmotor Mounting Position, Motor Shaft Design Flat, Overhung Load 30 lb, Input HP 1/175, Gear Ratio 938.2:1, Full Load Amps 1.0 A, Insulation Class B, None Thermal Protection, Motor Type Permanent Magnet DC, Unpainted Finish

DC Gearmotor Component Motor, DC Permanent Magnet, Totally Enclosed Nonventilated, 1/30 HP, Nameplate RPM 3000, Voltage 90V DC, Full Load Amps 0.5 A, Full Load Torque 0.694 in-lb, NEMA/IEC Frame 80, Face Motor Mounting Type, Motor Thermal Protection None, Ins. Class B, Ball Motor Bearings, Max. Ambient Temp. 40 Degrees C, CW/CCW Motor Shaft Rotation, Length Less Shaft 4 3/4 in, Shaft Dia. 5/16 in, Shaft Length 9/16 in

DC Gearmotor, Gearmotor Voltage 90V DC, Max. Torque 266.0 in-lb, Single Right Gearmotor Shaft Type, Nameplate RPM 30 RPM, Totally Enclosed Nonventilated Gearmotor Enclosure, All Angle Gearmotor Mounting Position, Overhung Load 175 lb, Input HP 1/8, Gear Ratio 60:1, Full Load Amps 1.72 A, Insulation Class F, None Thermal Protection, Motor Type Permanent Magnet DC, Matt Black Finish, Replacement Brushes 33K906

AC Gearmotor, Gearmotor Voltage 115V AC, 1 Gearmotor Phase, Max. Torque 600.0 in-lb, Single Gearmotor Shaft Type, Gearmotor Shaft Orientation Parallel, Gearmotor Rotation CW/CCW, Nameplate RPM 6 RPM, Open Dripproof Gearmotor Enclosure, All Angle Gearmotor Mounting Position, 60 Hz Hz, Overhung Load 300 lb, Input HP 1/4 hp, Gear Ratio 286:1, Full Load Amps 3.1, Insulation Class B, None Thermal Protection, Motor Type Split-Phase, Unpainted Finish, Die Cast Zinc Housing

DC Permanent Magnet Motor, Motor Design Permanent Magnet DC, 1/27 HP, Nameplate RPM 1, 800, Voltage 90V DC, 0.50 A Full Load Amps, Non-Standard Frame, Full Load Torque 1.3 in-lb, Motor Thermal Protection None, Ins. Class B, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Totally Enclosed Nonventilated, Motor Mounting Type Face, Base, Shaft Dia. 5/16 in, Motor Bearings Ball, Shaft Length 1 1/2 in, Brush Type External, Overall Length 6 7/16 in