Dayton 1Lpy4

DC Speed Control, Enclosure NEMA 4/12, Max. Amps 3 A, Voltage Output 0 to 90/180V DC, Speed Range 25:1, Rotation Single Direction, External Switches ON/OFF, AC Input Voltage 120/240V AC, DC Speed Control SCR, HP @ Lower Volts 1/50 to 1/3, HP @ Higher Volts 1/25 to 2/3, Linear Acceleration Fixed 0.5 sec, Current/Torque Limit None, Speed Regulation +/-1 Percent of Base Speed, Shunt Wound Volts 100/200V DC, Accepts Tach Feedback No, Dynamic Braking No, IR Compensation Adjustable

The Dayton 6K778 Split-Phase Belt Drive Motor is the perfect solution for belt drive fans and blowers. This split-phase motor has a 1/2 in. shaft diameter, which makes it compatible with most fan/blower applications. The open dripproof motor enclosure design protects against water, oil, dirt and other contaminants. With a 115V AC voltage, this belt drive motor is ideal for use in factories or warehouses where heavy duty equipment is used. It features one speed with a 1, 701 to 1, 800 RPM range. If you are looking for an efficient belt drive fan or blower motor that will not let you down during your next project, then look no further than the Dayton 6K778 Split Phase Belt Drive Motor.

The DC Speed Control is the ideal solution for controlling DC motors in a variety of applications, including material handling, laboratory, food processing, pump, fan/blower, conveyor, machine tool, DC motor and spooling applications. The speed potentiometer knob and dial plate are adjustable, and the speed control accepts tach feedback. The controller features an adjustable IR compensation that can be used to compensate for IR drop in the system. This speed control comes with a surface mount and includes a speed potentiometer knob, dial plate and an on/off switch.

DC Speed Control, Enclosure NEMA 1, Max. Amps 2 A, Voltage Output 0 to 90/180V DC, Speed Range 25:1, External Switches ON/OFF, AC Input Voltage 120/240V AC, DC Speed Control SCR, HP @ Lower Volts 1/50 to 1/6, HP @ Higher Volts 1/25 to 1/3, Linear Acceleration Fixed 0.5 sec, Current/Torque Limit None, Speed Regulation +/-1 Percent of Motor Base Speed, Shunt Wound Volts 100/200V DC, Accepts Tach Feedback No, Dynamic Braking No, Power On Light No, IR Compensation Adjustable, Height 5 in

OEM Blower, Blower Outlet Shape Rectangular, Yes, Blower Wheel Diameter 5 1/4 in, Blower Wheel Width 2 1/2 in, Blower Voltage 115V AC, Blower Motor Type Permanent Split Capacitor, Blower Thermal Protection Auto, Blower Conduit Box No, CFM @ 0.000-In. SP 134, 50/60 Hz, 1 Phase, Full Load Amps 0.63/0.55, RPM 1350/1550, Max. Inlet Temp. 104 Degrees F, Inlet Dia. 4 1/2 in, Overall Height 8 in, Overall Width 5 11/16 in, Overall Depth 7 7/16 in

Light-Duty Industrial Fan, Blade Dia. 30 in, Stationary, Non-Oscillating, 2 Speeds, Voltage 120V AC, 1 Phase, CFM High 7250, CFM Low 4650, Air Velocity @ 20 Ft. 715/480, Motor HP 1/4 hp, Motor RPM 1100/900, Operating Amps 2.9/1.9, Fan Mounting Location Ceiling, Wall, Fan Accessory Style Standard, Fan RPM 1100/900, Sound Level 77 dBA, Max. Ambient Temp. 104 Degrees F, Hz 60, Watts 320/225, Motor Type Permanent Split Capacitor, Drive Type Direct, Outside Dia. 33 In., Height 34 1/2 in, Width 33 in

OEM Blower, Blower Outlet Shape Rectangular, Yes, Blower Wheel Diameter 3 15/16 in, Blower Wheel Width 1 7/8 in, Blower Voltage 115V AC, Blower Motor Type Permanent Split Capacitor, Blower Thermal Protection Auto, Blower Conduit Box Yes, CFM @ 0.000-In. SP 146, 50/60 Hz, 1 Phase, Full Load Amps 0.75, RPM 3100, Max. Inlet Temp. 104 Degrees F, Inlet Dia. 3 1/8 in, Overall Height 5 3/4 in, Overall Width 6 5/16 in, Overall Depth 5 3/8 in, Includes Discharge Mounting Flange

Combination Belt and Bench Grinder, Speed Setting Single Speed, For Max. Wheel Dia. 6 in, Grinding Wheel Grit 60, Belt Length 27 in, Horsepower 1/4, Dust Management No Dust Management, Lights Included Yes, Overall Length 11 in, Overall Width 15 in, Overall Height 14 in

The DC Speed Control, 90/180VDC, 10A, NEMA 4/12, is designed to deliver accurate speed control in a wide range of industrial applications. It is used to control DC motors that are used in material handling, laboratory, food processing, pump, fan/blower, conveyor, machine tool, DC motor and spooling applications. The speed control has a current/torque limit that is adjustable. It is designed to provide linear deceleration that is fixed and offers IR compensation that is adjustable. The speed control is designed to provide external switches with forward/off/reverse functions. The speed control's rotation is reversible.

Belt Drive Motor, Single Phase, Motor Design Split-Phase, 1/4 HP, Nameplate RPM 1, 725, No. of Speeds 1, Voltage 115V AC, 5.3 Full Load Amps, 48 Frame, 60 Hz, Motor Service Factor 1.35, Motor Thermal Protection Auto, Ins. Class B, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Open Dripproof, Motor Mounting Type Cradle Base, Motor Mounting Position All Angle, Motor Frame Material Rolled Steel, Shaft Dia. 1/2 in, Shaft Length 1 1/2 in

Seal Kit, Fits Brand Dayton, For Use With Grainger Item Number 4JMV2, 4JMV3, 4JMV4, 4JMV5, 4JMV6, 4JMV7, 4JMV8, 4JMV9, 4JMW0, 4JMW1, 4JMW2, 4JMW3, 4JMW4, 4JMW5, 4JMW6, 4JMW7, 4JMW8, 4JMW9, 4JMX1. 4JMX2, 4JMX3, 4JMX4, 4JMX5, 4JMX6, 4JMX7, 4JMX8, 4JMX9, For Use With Mfr. Model Number PPT08888G