Dayton 6Z817

DC Gearmotor, Gearmotor Voltage 90V DC, Max. Torque 43.0 in-lb, Single Gearmotor Shaft Type, Nameplate RPM 170 RPM, Totally Enclosed Nonventilated Gearmotor Enclosure, All Angle Gearmotor Mounting Position, Overhung Load 150 lb, Input HP 1/8, Gear Ratio 11:1, Full Load Amps 1.41 A, None Thermal Protection, Motor Type Permanent Magnet DC, Replacement Brushes 6YHY6

DC Gearmotor, Gearmotor Voltage 90V DC, Max. Torque 70.0 in-lb, Single Gearmotor Shaft Type, Nameplate RPM 165 RPM, Totally Enclosed Nonventilated Gearmotor Enclosure, All Angle Gearmotor Mounting Position, Overhung Load 232 lb, Input HP 1/4, Gear Ratio 15:1, Full Load Amps 2.0 A, None Thermal Protection, Motor Type Permanent Magnet DC

DC Gearmotor, Gearmotor Voltage 90V DC, Max. Torque 94.0 in-lb, Single Right Gearmotor Shaft Type, Nameplate RPM 30 RPM, Totally Enclosed Nonventilated Gearmotor Enclosure, All Angle Gearmotor Mounting Position, Overhung Load 175 lb, Input HP 1/8, Gear Ratio 60:1, Full Load Amps 1.28 A, Insulation Class F, None Thermal Protection, Motor Type Permanent Magnet DC, Powder Coated Gloss Black Finish, Replacement Brushes 6YHY6

AC Gearmotor, Gearmotor Voltage 208-230V AC, 3 Gearmotor Phase, Max. Torque 238.0 in-lb, Single Right Gearmotor Shaft Type, Gearmotor Shaft Orientation Right Angle, Gearmotor Rotation CW/CCW, Nameplate RPM 29 RPM, Totally Enclosed Fan-Cooled Gearmotor Enclosure, Horizontal or Vertical Shaft Down Gearmotor Mounting Position, 60 Hz Hz, Overhung Load 235 lb, Input HP 3/8 hp, Gear Ratio 60:1, Full Load Amps 1.3, Insulation Class F4, None Thermal Protection, Motor Type 3-Phase

AC Gearmotor, Gearmotor Voltage 115V AC, 1 Gearmotor Phase, Max. Torque 59.0 in-lb, Single Gearmotor Shaft Type, Gearmotor Shaft Orientation Parallel, Gearmotor Rotation CW, Nameplate RPM 60 RPM, Open Gearmotor Enclosure, All Angle Gearmotor Mounting Position, 60 Hz Hz, Overhung Load 150 lb, Input HP 1/10 hp, Gear Ratio 27:1, Full Load Amps 2.6, Insulation Class B, None Thermal Protection, Motor Type Shaded Pole, Unpainted Finish, Die Cast Zinc Housing

DC Gearmotor, Gearmotor Voltage 90V DC, Max. Torque 570.0 in-lb, Single Gearmotor Shaft Type, Nameplate RPM 15 RPM, Totally Enclosed Nonventilated Gearmotor Enclosure, All Angle Gearmotor Mounting Position, Overhung Load 900 lb, Input HP 1/6, Gear Ratio 116:1, Full Load Amps 1.7 A, None Thermal Protection, Motor Type Permanent Magnet DC, Replacement Brushes 6YHY6

AC/DC Gearmotor, Gearmotor Voltage 115V AC/DC, Full Load Torque 250 in-lb, Single Right Gearmotor Shaft Type, Nameplate RPM 4.5 RPM, Insulation Class B, All Angle Gearmotor Mounting Position, 60/50 Hz Hz, 1 Gearmotor Phase, Overhung Load 100 lb, Input HP 1/15, Gear Ratio 1714:1, Full Load Amps 1.1 A, Open Gearmotor Enclosure, None Thermal Protection, Motor Type Universal, Unpainted Finish, Die Cast Zinc Housing Material, Replacement Brushes 1YNR3

AC Gearmotor, Gearmotor Voltage 115V AC, 1 Gearmotor Phase, Max. Torque 600.0 in-lb, Single Gearmotor Shaft Type, Gearmotor Shaft Orientation Parallel, Gearmotor Rotation CW/CCW, Nameplate RPM 6 RPM, Open Dripproof Gearmotor Enclosure, All Angle Gearmotor Mounting Position, 60 Hz Hz, Overhung Load 300 lb, Input HP 1/4 hp, Gear Ratio 286:1, Full Load Amps 3.1, Insulation Class B, None Thermal Protection, Motor Type Split-Phase, Unpainted Finish, Die Cast Zinc Housing

Product Type Suspended Infrared Flat Panel Heater, Fuel Type Natural Gas, Heating Capacity Input 60, 000 BtuH, Min. Mounting Height 12 to 14 ft, Floor Coverage @ Minimum Mounting Height 16 ft x 16 ft, Overall Height 22 1/2 in, Overall Width 19 1/8 in, Overall Depth 15 1/4 in, Mounting Height 14 to 16 ft, Typical Coverage @ Mounting Height 18 ft x 18 ft, Mounting Location Ceiling, Mounting Type Chain Suspension, For Use Outdoors Indoor Use Only, Control Voltage 120 V AC, Frequency 60 Hz

Belt Drive Motor, Single Phase, Motor Design Capacitor-Start, 1 HP, Nameplate RPM 1, 725, No. of Speeds 1, Voltage 115/208-230V AC, 13.6/6.9-6.9 Full Load Amps, 56 Frame, 60 Hz, Motor Service Factor 1.15, Motor Thermal Protection Auto, Ins. Class B, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Open Dripproof, Motor Mounting Type Cradle Base, Motor Mounting Position All Angle, Motor Frame Material Rolled Steel, Shaft Dia. 5/8 in