Delta Table Saw Parts

Table, 30", Accu-Fence System, 27" x 17

Motor Pulley For Jet Drill Press

Drill Press w/Laser, 10 In.

General Purpose Drill Presses, Floor Drill Press, Drive Type Belt, Swing 18 in, Spindle Taper JT3/MT2, Motor HP 1 hp, Capacity Steel Not Specified, Capacity Cast Iron Not Specified, Drilling Capacity Wood Not Specified, Power Down Feed Included No, Voltage 115/230, Amps AC 15.0/7.5, Number of Speeds Variable, Chuck Size 5/8 in, Spindle Speed 250 to 3000 rpm, Spindle Travel 6 in, Base Size 13-3/8 in x 20 in, Table Work Surface 20 in x 14 in, Hz 60, Phase 1, Number of T-Slots 0

General Purpose Drill Presses, Bench Drill Press, Drive Type Belt, Swing 10 in, Spindle Taper 33JT, Motor HP 1/3 hp, Capacity Steel 3/8 in, Capacity Cast Iron 1/2 in, Drilling Capacity Wood Not Specified, Includes Arbor, Chuck, Paddle Switch, Spindle Depth Stop, Tilting Table, Power Down Feed Included No, Voltage 120, Amps AC 4.1, Number of Speeds 5, Chuck Size 1/2 in, Spindle Speed 650 to 3070 rpm, Spindle Travel 2 1/2 in, Base Size 8-1/4 in x 13-1/2 in

Band Saw, Band Saw Type Vertical, Band Saw Operation Manual, Voltage 230V AC, Phase 1, Rectangular Cutting Capacity - Horizontal 14 in x 8 in, Throat Depth - Vertical 14.5 in, Round Cutting Capacity - Horizontal 14 in, SFPM Range 3100, Miter Angle Range 10 Degrees Left to 45 Degrees Right, Number of Speed Settings 1, Material Application Composite Materials, Plastic, Wood, Blade Length 12 ft 9 in, Max. Blade Width 1 in, Min. Blade Width 1/8 in, Cutting Capacity Square 14 in, Power Source Corded

Powermatic 8In. Parallelogram Jointer 2H

Planer, Voltage 230, 5, 000 RPM Speed, Motor HP 5 hp, 28 Amps, Cutting Width (In.) 20 in, Cutting Thickness (In.) 8 in, Depth of Cut (In.) 3/32 in, Cuts per Minute 20, 000, Feed Rates (FPM) 16/20, 24/31, 1 Phase Motor, Helical Cutter Head, Cast Iron, Overall Depth (In.) 26 in, Overall Height (In.) 41 3/8 in, Overall Width (In.) 36 5/8 in

Dust Collector, Canister, Max. Flow (CFM) 1, 064, Min. Air Flow (CFM) 0, Operating Velocity Range (FPM) 5, 374, Static Pressure Range (In.) 11.31, 1 3/4 hp HP, 115/230 Voltage, 60 Hz, 1, 15 to 7.5 Amps AC, Chip Capacity (Microns) 26, Height (In.) 30 in, Width (In.) 23 in, Depth (In.) 30 in, Overall Height (In.) 30 in, Overall Width (In.) 23 in, Overall Depth (In.) 30 in, Max. Hose Length (Ft.) 5.83, Hose Dia. (In.) 6 in, 79 to 90 dBA, 26 micron Filter Bag, Impeller Dia. (In.) 12 in

Benchtop Router Table

Planer, 4, 500 RPM Speed, Motor HP 3 hp, 28 Amps, Cutting Width (In.) 14 7/8 in, Cutting Thickness (In.) 6 in, Depth of Cut (In.) 1/8 in, Cuts per Minute 13, 500, Feed Rates (FPM) 16/20, No Load RPM 4, 500 RPM, Helical Cutter Head, Cast Iron, Overall Depth (In.) 48 in, Overall Height (In.) 43 1/2 in, Overall Width (In.) 28 in