customer-service Help

Electrical Outlet Tester

Count on great prices, fast shipping and friendly service every time you order an electrical outlet tester from Zoro.

Shop Electrical Outlet Tester

$12.74

Receptacle Tester with GFCI, Voltage 120, NEMA Plug Configuration No, Indicator LED, Frequency Range 60 Hz, Standards CUL, Includes GFCI Receptacle Tester, Instructions, Manufacturers Warranty Length 1 yr

View Full Product Details

KLEIN TOOLS GFCI Outlet Tester

Zoro # G3498411 Mfr # RT210
$12.97

Klein Tools Receptacle Testers are designed to detect the most common wiring problems in standard and GFCI receptacles. A convenient chart on the tester helps determine wiring condition in outlet, based on LED lights results. Conditions indicated: open ground, reverse polarity, open hot, open neutral, hot/ground reversed. GFCI Tester detects the most common wiring problems in standard and GFCI receptacles. Works on GFCI outlets and confirms operation of the ground fault protective device. Built to withstand a 6.6-foot (2m) drop. Operating temp: 32-Degree to 140-Degree Fahrenheit (0-Degree to 40-Degree Celsius). Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet.

View Full Product Details
$10.78

Receptacle Tester with GFCI, Voltage 110 to 125V AC, Indicator Lamps & LED Display, Load Current 6 to 9mA for GFCI, Standards CE, UL, Includes Instruction Manual, Manufacturers Warranty Length 3 yr

View Full Product Details

KLEIN TOOLS AFCI /GFCI Outlet Tester

Zoro # G4619606 Mfr # RT310
$39.97

RT310 is an electrical tester that tests the wiring condition at an electrical outlet, and inspects and checks AFCI and GFCI devices. It is designed for use with North American 120V electrical outlets. It can detect and identify common wiring faults. Includes 3 x 1.5V AAA alkaline batteries. GFCI Tester detects the most common wiring faults in standard, AFCI, and GFCI electrical outlets. Test AFCI devices by simulating arc fault conditions. Test GFCI devices by simulating ground fault conditions. Capable of detecting a dual-open wiring fault with simultaneous open neutral and open ground wires (patent pending technology). Tester delivers clear visual indication of the wiring condition at the electrical outlet. Designed to test North American-style grounded electrical outlets in 120V AC circuits (incorporates a three-pin plug). Electrical plug is on a 10-Inch (254 mm) flexible electrical cord to access electrical outlets in difficult to reach locations. Low battery indicator and easily accessible battery compartment; Uses 3 x 1.5V AAA alkaline batteries (included). Powers off automatically after approximately 2 minutes of non-use to conserve battery life. Built to withstand a 6.6-Foot (2 m) drop.

View Full Product Details
$35.99

Voltage Detector, Voltage Range 90 to 1000V AC, Indication Audible/Visual, Audible Alert Yes, Battery Type AAA, Safety Rating CAT IV 1000V, On/Off Switch Yes, Length 5 in, Switch Type Push Button, Special Features Circuit Integrity with A Periodic Double Flash Visual Indication, Continually Tests Battery, Operating Temp. 14 Degrees to 122 Degrees F, Includes (2) AAA Batteries, Instructions, Manufacturers Warranty Length 2 yr

View Full Product Details
$23.20

GFCI with Non-Contact Voltage Tester, Voltage 125V AC, NEMA Plug Configuration 5-15P, Indicator LED, Frequency Range 50 to 60 Hz, Voltage Drop 0.1 Percent to 99.9 Percent, Ground Impedance 0.00 to 1.99 Ohms, Load Current 20A, Safety Rating CAT III 1000V, Standards CE, UL, Manufacturers Warranty Length Lifetime

View Full Product Details
$21.99

Klein Tools ET10 is a digital thermometer that takes ambient and direct-contact readings in both Fahrenheit (°F) and Celsius (°C) scales.The rugged, portable design with magnet makes it a practical choice of HVAC field service teams. Magnet inside base of probe attaches easily to air vents. The protective sheath cleverly serves as a handle to extend reach. Magnet inside base of probe to easily attach to vents. Range -40 to 572-degrees F (-40 to 300-degrees C). User selectable Fahrenheit and Celsius temperature measurements. Backlit display for easy viewing in low light. Not a medical device; thermometer is NOT intended for use on people or animals.. Max/Min, Hold and Average functions. Auto-power off after 15 minutes conserves battery life. 3 inch stainless steel probe with removable protective sheath that doubles as a handle. Lightweight, compact tool with pocket clip provides easy storage and quick access.

View Full Product Details
$44.99

The Klein Tools ET310 Circuit Breaker Finder with Integrated GFCI Outlet Tester is a digital circuit breaker finder used to locate the correct circuit breaker in a panel to which an electrical outlet or fixture is connected. The Transmitter is connected to the electrical outlet or fixture in the circuit while the receiver is used to scan the breakers in the circuit panel. The Transmitter also features a GFCI outlet tester. This circuit breaker finder can quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected. GFCI tester consists of two parts: a Transmitter connected to the electrical outlet or fixture, and a Receiver used to scan the panel to locate the correct breaker. Receiver delivers clear visual and audible indications when the correct breaker has been located. Operates on 90-120V AC circuits. Transmitter incorporates a GFCI outlet tester to inspect the wiring condition at the electrical outlet and test GFCI devices. Transmitter docks in the Receiver for convenient storage as a single item when tester is not is use. Transmitter incorporates a three-pin plug for connecting to North-American-style grounded electrical outlets. The transmitter may be connected to other electrical fixtures using optional accessories which are sold separately (Cat. No. 69411). Receiver powers off automatically after approximately three minutes of non-use to conserve battery life. Transmitter is powered by the circuit when connected to the electrical outlet or fixture.Low battery indicator. Easily accessible battery compartment. Uses one 9V battery in receiver only; Transmitter does not require a battery. Built to withstand a 6.6-Foot (2 m) drop. CAT II 120V safety rating. Measurement Category II is applicable to test and measuring circuits connected directly to utilization points (socket outlets and similar points) of the low-voltage MAINS installation. Includes Transmitter, Receiver, user manual, and 9V battery (for Receiver).

View Full Product Details

IDEAL GFCI Receptacle Tester

Zoro # G0197706 Mfr # 61-501
$25.33

This GFCI Receptacle Tester from IDEAL tests GFI receptacles for proper operation and warns against faulty wiring in 3-wire connections. It is for use only on 120-volt AC circuits.

View Full Product Details