Fasco D119

OEM Replacement Motor, Single Phase, Motor Design Shaded Pole, 1/20 HP, Nameplate RPM 1, 550, No. of Speeds 1, Voltage 115V AC, Full Load Amps 2.1, 3.3 in Frame, Usable @ 208V No, Usable @ 200V No, Motor Thermal Protection Auto, 60 Hz, Motor Service Factor 1, Ins. Class B, Motor Shaft Rotation CWSE, Max. Ambient Temp. 40 Degrees C, Lead Length 13 in, Motor Enclosure Design Open Air-Over, Motor Mounting Type Extended Stud, Number of Shafts 1

Double Loop Ties, Baling Wire Type Wire Ties, Wire Finish Bare Wire, Wire Gauge 16 ga, Wire Diameter 0.0625 in, Length 0.5 ft, Break Strength 155 lb, Material Black Annealed Wire, Number of Loops Double Loop, Package Quantity 5000

This Condenser Fan Motor is a great OEM replacement motor for your condenser fan. It has a shaded pole motor design with a single phase motor. The motor is 115 volts, 1/20 horsepower, and has a CWSE motor shaft rotation. This motor is designed to be used as an OEM replacement motor for the brand Heatcraft. This motor has an open air-over motor enclosure enclosure. It features a sleeve bearing, so it is designed for lower maintenance and longer life.

Draft Inducer, Inlet and Outlet Dia. (In.) 2.0/1.7, Voltage 115, Height (In.) 9 7/64 in, Width (In.) 6 25/32 in, Depth (In.) 10 29/32 in, Furnace, Construction Material Plastic, Agency Compliance CSA Motor Only, UL, Replaces Fasco 702111577, 702111577S, 702111830, York 024-34558-000, 17503, Fits Brand York, For Use With Mfr. Model Number 024-34558-000, 17503, 7021-11577, 7021-11577S, 7021-11830, 76, 68, 65, 60, 54

Direct Drive Blower Motor, Single Phase, Motor Design Shaded Pole, 1/50 HP, Nameplate RPM 1, 500, No. of Speeds 1, Voltage 115V AC, Full Load Amps 0.80, 3.3 in Frame, Usable @ 208V No, Usable @ 200V No, Motor Thermal Protection Auto, 60 Hz, Motor Service Factor 1, Ins. Class B, Motor Shaft Rotation CWSE, Max. Ambient Temp. 40 Degrees C, Lead Length 12 in, Motor Enclosure Design Totally Enclosed Air-Over, Motor Mounting Type Extended Stud, Motor Mounting Position All Angle, Number of Shafts 1

Direct Drive Blower Motor, Single Phase, Motor Design Shaded Pole, 1/20 HP, Nameplate RPM 1, 500, No. of Speeds 1, Voltage 230V AC, Full Load Amps 0.90, 3.3 in Frame, Usable @ 208V No, Usable @ 200V No, Motor Thermal Protection Auto, 60 Hz, Motor Service Factor 1, Ins. Class B, Motor Shaft Rotation CCWSE, Max. Ambient Temp. 40 Degrees C, Lead Length 12 in, Motor Enclosure Design Open Air-Over, Motor Mounting Type Extended Stud, Motor Mounting Position All Angle, Number of Shafts 1

Direct Drive Blower Motor, Single Phase, Motor Design Shaded Pole, 1/15 HP, Nameplate RPM 1, 600, No. of Speeds 1, Voltage 115V AC, Full Load Amps 2.00, 3.3 in Frame, Usable @ 208V No, Usable @ 200V No, Motor Thermal Protection Auto, 60 Hz, Motor Service Factor 1, Ins. Class B, Motor Shaft Rotation CWSE, Max. Ambient Temp. 40 Degrees C, Lead Length 12 in, 16 in, Motor Enclosure Design Open Air-Over, Motor Mounting Type Extended Stud, Motor Mounting Position All Angle, Number of Shafts 1

Induced Draft Furnace Blower, U21B, Voltage 115, 1.4 Amps, 107 W Watts, 1/50 hp HP, Height (In.) 9 7/8 in, Width (In.) 9 in, Depth (In.) 6 3/8 in, Gas Furnaces, Construction Material Plastic, Agency Compliance CSA, UL, Replaces Alltemp (Rotom) FB-RFB140, 70219915, Fasco70219087, 70219565, Goodman B2833001, Product Used as Direct OEM Replacement Only. Any Other use Constitutes a Misapplication, Which Voids the Warranty and May Create Unsafe Conditions, Fits Brand Goodman

OEM Replacement Motor, Single Phase, Motor Design Permanent Split Capacitor, 1/3 HP, Nameplate RPM 1, 675/1, 080, No. of Speeds 2, Voltage 115V AC, Full Load Amps 3.4, 42 Frame, OEM Replacement Brand Coleman, Replacement For Coleman Mfr. No. 1468-306, 1468-3069, Usable @ 208V No, Usable @ 200V No, 60 Hz, Motor Service Factor 1, Motor Thermal Protection Auto, Ins. Class B, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, Motor Shaft Rotation CCWSE, Motor Enclosure Design Open Air-Over

Direct Drive Blower Motor, Single Phase, Motor Design Permanent Split Capacitor, 1/3 to 1/4 to 1/5 HP, Nameplate RPM 1, 075, No. of Speeds 3, Voltage 115V AC, Full Load Amps 5.9-4.6-3.8, 48 Frame, Usable @ 208V No, Usable @ 200V No, Motor Thermal Protection Auto, 60 Hz, Motor Service Factor 1, Ins. Class B, Motor Shaft Rotation CW/CCW, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, Lead Length 26 in, Motor Enclosure Design Open Dripproof, Motor Mounting Type Extended Stud

Direct Drive Blower Motor, Single Phase, Motor Design Shaded Pole, 1/50 HP, Nameplate RPM 3, 000, No. of Speeds 1, Voltage 115V AC, Full Load Amps 0.92, 3.3 in Frame, Usable @ 208V No, Usable @ 200V No, Motor Thermal Protection Auto, 60 Hz, Motor Service Factor 1, Ins. Class B, Motor Shaft Rotation CWSE, Max. Ambient Temp. 40 Degrees C, Lead Length 18 in, Motor Enclosure Design Open Air-Over, Motor Mounting Type Extended Stud, Motor Mounting Position All Angle, Number of Shafts 1