customer-service Help

Field Controls Induced Draft Blowers

We have the field controls induced draft blowers you need to get the job done right.

Shop Field Controls Induced Draft Blowers

$542.70

Power Venter, Power Venter, Vent Pipe Dia. (In.) 4, Inlet and Outlet Dia. (In.) 4, Voltage 115, 2.1 Amps, 145 W Watts, Height (In.) 7 1/2 in, Width (In.) 7 3/4 in, Depth (In.) 10 in, Gas, Construction Material Galvanized Steel, Agency Compliance ETL, Used to Exhaust Heating Appliances, Includes Power Vent, 100, 000, 550 Degrees F, 4

View Full Product Details
$1,583.98

Power Venter, Power Venter, Vent Pipe Dia. (In.) 8, Inlet and Outlet Dia. (In.) 8, Voltage 115, 4.37 Amps, 478 W Watts, Height (In.) 14 in, Width (In.) 24 in, Depth (In.) 13 in, 11-1/4 in Cut Out Required, Gas/Oil Heating, Construction Material Aluminum Steel, Agency Compliance ETL, Used to Exhaust Heating Appliances, Includes Power Vent and Backing Plate, 740, 000, 550 Degrees F, 100

View Full Product Details
$1,124.13

Power Venter, Power Venter, Vent Pipe Dia. (In.) 5, Inlet and Outlet Dia. (In.) 5, Voltage 115, 1.5 Amps, 167 W Watts, Height (In.) 8 3/4 in, Width (In.) 9 3/4 in, Depth (In.) 8 1/2 in, Gas, Construction Material Galvanized Steel, Agency Compliance ETL, Used to Exhaust Heating Appliances, Includes Power Vent, 610, 000, 550 Degrees F, 4

View Full Product Details
$293.99

Induced Draft Blower, High Temperature, Vent Pipe Dia. (In.) 4 or 6, Inlet and Outlet Dia. (In.) 4, Voltage 115, 1.26 Amps, 95 W Watts, Height (In.) 7 7/8 in, Width (In.) 11 in, Depth (In.) 7 in, Used for Side Wall Venting Commercial Natural Gas or LP Fired Equipment Including Boilers, Water Heaters and Unit Heaters, Construction Material Aluminized Steel Housing and Blower Wheel, Agency Compliance ETL Listed to UL378 and CAN3-B255-M81, View Catalog Page For Selection Criteria

View Full Product Details
$414.86

Draft Inducer, In-line, Vent Pipe Dia. (In.) 8 to 12, Voltage 115, 5.4 Amps, 1/4 hp HP, Height (In.) 14 1/2 in, Width (In.) 13 1/2 in, Depth (In.) 8 3/4 in, 4 x 12-3/4 Cut Out Required, Provides Positive Draft for Smokepipe and Aids Proper Exhaust of Combustion Gas., Construction Material Aluminized Steel Housing and Blower Wheel, Agency Compliance -, Replaces -, View Catalog Page For Selection Criteria, Not Applicable, N/A, N/A., Not Applicable, Not Applicable, 590765850710, 603653615357

View Full Product Details
$489.95

Induced Draft Blower, High Temperature, Vent Pipe Dia. (In.) 6 or 8, Inlet and Outlet Dia. (In.) 6, Voltage 115, 1.51 Amps, 224 W Watts, Height (In.) 9 1/4 in, Width (In.) 11 1/2 in, Depth (In.) 8 1/2 in, - Cut Out Required, Used for Side Wall Venting Commercial Natural Gas or LP Fired Equipment Including Boilers, Water Heaters and Unit Heaters., Construction Material Aluminized Steel Housing and Blower Wheel, Agency Compliance ETL Listed to UL378 and CAN3-B255-M81, Replaces -

View Full Product Details
$149.50

Draft Inducer, In-line, Vent Pipe Dia. (In.) 5 to 8, Voltage 115, 0.96 Amps, 74 W Watts, 1/20 hp HP, Height (In.) 9 1/8 in, Width (In.) 9 1/2 in, Depth (In.) 7 in, 3-1/8 x 8-5/8 Cut Out Required, Provides Positive Draft for Smokepipe and Aids Proper Exhaust of Combustion Gas., Construction Material Aluminized Steel Housing and Blower Wheel, Agency Compliance -, Replaces -, View Catalog Page For Selection Criteria, Not Applicable, N/A, N/A., Not Applicable, Not Applicable, 190246259217

View Full Product Details
$183.17

Barometric Draft Control, Diameter 7 in to 8 in, Galvanized Steel, Nominal Capacity 50.3, Silver, Length 2 5/8 in, Width 8 11/16 in, Height 8 11/16 in, Application Gas

View Full Product Details
$326.08

ECM Direct Drive Blower Motor, Single Phase, Motor Design ECM, 3/4 HP, Nameplate RPM 1, 075, No. of Speeds 5, Voltage 208-230V AC, Full Load Amps 6.0, 48 Frame, Usable @ 208V Yes, Usable @ 200V No, Motor Thermal Protection None, 60 Hz, Motor Service Factor 1, Ins. Class B, Motor Shaft Rotation CW/CCW, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, Lead Length 42 in, Motor Enclosure Design Open Air-Over, Motor Mounting Type Round Base, Motor Mounting Position Horizontal

View Full Product Details
$66.71

HVAC Motor, Single Phase, Motor Design Permanent Split Capacitor, 1/20 HP, Nameplate RPM 1, 550, No. of Speeds 1, Voltage 208-230V AC, Full Load Amps 0.40-0.38, 3.3 in Frame, Usable @ 208V Yes, Usable @ 200V No, Motor Thermal Protection Auto, 60/50 Hz, Motor Service Factor 1, Ins. Class B, Motor Shaft Rotation CW/CCW, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, Motor Enclosure Design Open Air-Over, Motor Mounting Type Stud, Motor Mounting Position All Angle, Number of Shafts 1

View Full Product Details