Gfci Led Receptacle

Klein Tools Receptacle Testers are designed to detect the most common wiring problems in standard and GFCI receptacles. A convenient chart on the tester helps determine wiring condition in outlet, based on LED lights results. Conditions indicated: open ground, reverse polarity, open hot, open neutral, hot/ground reversed. GFCI Tester detects the most common wiring problems in standard and GFCI receptacles. Works on GFCI outlets and confirms operation of the ground fault protective device. Built to withstand a 6.6-foot (2m) drop. Operating temp: 32-Degree to 140-Degree Fahrenheit (0-Degree to 40-Degree Celsius). Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet.

Outlet Tester & Circuit Analyzer, 120VAC

Receptacle Tester with GFCI, Voltage 110 to 125V AC, Indicator Hot/Ground Reverse, Hot/Neutral Reverse and Correct, Open Ground, Open Hot, Open Neutral, Standards C), CSA (US, Includes Tester, Manufacturers Warranty Length 1 yr

Receptacle Tester with GFCI, Voltage 110 to 125V AC, Indicator Lamps & LED Display, Load Current 6 to 9mA for GFCI, Standards CE, UL, Includes Instruction Manual, Manufacturers Warranty Length 3 yr

GFCI with Non-Contact Voltage Tester, Voltage 125V AC, NEMA Plug Configuration 5-15P, Indicator LED, Frequency Range 50 to 60 Hz, Voltage Drop 0.1 Percent to 99.9 Percent, Ground Impedance 0.00 to 1.99 ohm, Load Current 20 A, Safety Rating CAT III 1000V, Standards CE, UL, Manufacturers Warranty Length Lifetime

Receptacle Tester with GFCI, Voltage 125V AC, Frequency Range 60 Hz, Standards CSA, File E 41978, UL, UL943 Class A

GFCI Receptacle Tester/Circuit Analyzer

Klein Tools RT110 Receptacle Tester detects the most common wiring problems in standard receptacles. Conditions indicated: wiring correct, open ground, reverse electrical outlet, open hot, open neutral, hot/ground reversed. Conditions not indicated: quality of ground, multiple hot wires, combinations of defects, reversal of grounded and grounding conductors. Outlet tester's light sequence on receptacle tester indicates correct/incorrect wiring. Receptacle tester conforms to UL Std 1436, Certified to CSA Std C22.2 #160. Operating temp: 32-degrees F to 140-degrees F (0-degrees C to 40-degrees C). Built to withstand a 6.6-foot (2m) drop. Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet. Designed to detect the most common wiring problems in standard receptacles.

Network Cable Tester, UTP/STP

Digital Clamp Meter, 10 Func., 400-Amp

Receptacle Tester with GFCI, Voltage 120V AC, Indicator Super Safe, Zero Heat LEDs, Frequency Range 60 Hz, Special Features Features A 40-Inch Cord. Tests Standard Outlets That Are in Series With Other GFCI Outlets. Indicates Correct Circuit Status or Specific Wiring Errors., Standards cULus, Manufacturers Warranty Length 1 yr