Gfci Outlet Tester
Count on great prices, fast shipping and friendly service every time you order a gfci outlet tester from Zoro.
Featured Product
Klein Tools Receptacle Testers are designed to detect the most common wiring problems in standard and GFCI receptacles. A convenient chart on the tester helps determine wiring condition in outlet, based on LED lights results. Conditions indicated: open ground, reverse polarity, open hot, open neutral, hot/ground reversed. GFCI Tester detects the most common wiring problems in standard and GFCI receptacles. Works on GFCI outlets and confirms operation of the ground fault protective device. Built to withstand a 6.6-foot (2m) drop. Operating temp: 32-Degree to 140-Degree Fahrenheit (0-Degree to 40-Degree Celsius). Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet.
View Full Product DetailsKlein Tools Receptacle Testers are designed to detect the most common wiring problems in standard and GFCI receptacles. A convenient chart on the tester helps determine wiring condition in outlet, based on LED lights results. Conditions indicated: open ground, reverse polarity, open hot, open neutral, hot/ground reversed. GFCI Tester detects the most common wiring problems in standard and GFCI receptacles. Works on GFCI outlets and confirms operation of the ground fault protective device. Built to withstand a 6.6-foot (2m) drop. Operating temp: 32-Degree to 140-Degree Fahrenheit (0-Degree to 40-Degree Celsius). Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet.
View Full Product DetailsShop Gfci Outlet Tester
RT310 is an electrical tester that tests the wiring condition at an electrical outlet, and inspects and checks AFCI and GFCI devices. It is designed for use with North American 120V electrical outlets. It can detect and identify common wiring faults. Includes 3 x 1.5V AAA alkaline batteries. GFCI Tester detects the most common wiring faults in standard, AFCI, and GFCI electrical outlets. Test AFCI devices by simulating arc fault conditions. Test GFCI devices by simulating ground fault conditions. Capable of detecting a dual-open wiring fault with simultaneous open neutral and open ground wires (patent pending technology). Tester delivers clear visual indication of the wiring condition at the electrical outlet. Designed to test North American-style grounded electrical outlets in 120V AC circuits (incorporates a three-pin plug). Electrical plug is on a 10-Inch (254 mm) flexible electrical cord to access electrical outlets in difficult to reach locations. Low battery indicator and easily accessible battery compartment; Uses 3 x 1.5V AAA alkaline batteries (included). Powers off automatically after approximately 2 minutes of non-use to conserve battery life. Built to withstand a 6.6-Foot (2 m) drop.
View Full Product DetailsRT310 is an electrical tester that tests the wiring condition at an electrical outlet, and inspects and checks AFCI and GFCI devices. It is designed for use with North American 120V electrical outlets. It can detect and identify common wiring faults. Includes 3 x 1.5V AAA alkaline batteries. GFCI Tester detects the most common wiring faults in standard, AFCI, and GFCI electrical outlets. Test AFCI devices by simulating arc fault conditions. Test GFCI devices by simulating ground fault conditions. Capable of detecting a dual-open wiring fault with simultaneous open neutral and open ground wires (patent pending technology). Tester delivers clear visual indication of the wiring condition at the electrical outlet. Designed to test North American-style grounded electrical outlets in 120V AC circuits (incorporates a three-pin plug). Electrical plug is on a 10-Inch (254 mm) flexible electrical cord to access electrical outlets in difficult to reach locations. Low battery indicator and easily accessible battery compartment; Uses 3 x 1.5V AAA alkaline batteries (included). Powers off automatically after approximately 2 minutes of non-use to conserve battery life. Built to withstand a 6.6-Foot (2 m) drop.
View Full Product DetailsThe RT250 is an electrical receptacle tester that tests the wiring conditions at an electrical outlet and inspects GFCI devices. The LCD displays the voltage, identifies the wiring fault, and the time required to trip a GFCI device. It is designated for use with North American 3-wire 120V electrical outlets. GFCI Receptacle Tester features a large backlit LCD readout of voltage and clear indication of wiring conditions. LCD readout shows the time required to trip a GFCI device. Detect and identify common wiring faults. Patent pending detection of Open Neutral Open Ground wiring fault. Auto-Hold is convenient for hard-to-reach outlets. Bright green and red LEDs illuminate for visual indicators. CAT II 135V safety rating. Durable 6.6-Foot (2 m) drop protection. For use on 3-wire, North American 120V electrical outlets only.
View Full Product DetailsThe RT250 is an electrical receptacle tester that tests the wiring conditions at an electrical outlet and inspects GFCI devices. The LCD displays the voltage, identifies the wiring fault, and the time required to trip a GFCI device. It is designated for use with North American 3-wire 120V electrical outlets. GFCI Receptacle Tester features a large backlit LCD readout of voltage and clear indication of wiring conditions. LCD readout shows the time required to trip a GFCI device. Detect and identify common wiring faults. Patent pending detection of Open Neutral Open Ground wiring fault. Auto-Hold is convenient for hard-to-reach outlets. Bright green and red LEDs illuminate for visual indicators. CAT II 135V safety rating. Durable 6.6-Foot (2 m) drop protection. For use on 3-wire, North American 120V electrical outlets only.
View Full Product DetailsOutlet Tester & Circuit Analyzer, 120VAC
View Full Product DetailsReceptacle Tester with GFCI, Voltage 110 to 125V AC, Indicator Lamps & LED Display, Load Current 6 to 9mA for GFCI, Standards CE, UL, Includes Instruction Manual, Manufacturers Warranty Length 3 yr
View Full Product DetailsReceptacle Tester with GFCI, Voltage 110 to 125V AC, Indicator Lamps & LED Display, Load Current 6 to 9mA for GFCI, Standards CE, UL, Includes Instruction Manual, Manufacturers Warranty Length 3 yr
View Full Product DetailsReceptacle Tester with GFCI, Voltage 120, NEMA Plug Configuration No, Indicator LED, Frequency Range 60 Hz, Standards CUL, Includes GFCI Receptacle Tester, Instructions, Manufacturers Warranty Length 1 yr
View Full Product DetailsReceptacle Tester with GFCI, Voltage 120, NEMA Plug Configuration No, Indicator LED, Frequency Range 60 Hz, Standards CUL, Includes GFCI Receptacle Tester, Instructions, Manufacturers Warranty Length 1 yr
View Full Product DetailsGFCI Receptacle Tester/Circuit Analyzer
View Full Product DetailsThis GFCI Receptacle Tester from IDEAL tests GFI receptacles for proper operation and warns against faulty wiring in 3-wire connections. It is for use only on 120-volt AC circuits.
View Full Product DetailsThis GFCI Receptacle Tester from IDEAL tests GFI receptacles for proper operation and warns against faulty wiring in 3-wire connections. It is for use only on 120-volt AC circuits.
View Full Product DetailsRelease Tool, for Clipless Hose Clamp
View Full Product DetailsReceptacle Tester with GFCI, Voltage 110 to 125V AC, Indicator Hot/Ground Reverse, Hot/Neutral Reverse and Correct, Open Ground, Open Hot, Open Neutral, Standards C), CSA (US, Includes Tester, Manufacturers Warranty Length 1 yr
View Full Product DetailsReceptacle Tester with GFCI, Voltage 110 to 125V AC, Indicator Hot/Ground Reverse, Hot/Neutral Reverse and Correct, Open Ground, Open Hot, Open Neutral, Standards C), CSA (US, Includes Tester, Manufacturers Warranty Length 1 yr
View Full Product DetailsKLEIN TOOLS Non-Contact Voltage Tester Pen, 12-1000V, with Infrared Thermometer
Zoro # G3498509 Mfr # NCVT-4IRKlein Tools NCVT-4IR is a voltage tester that provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires; as well as infrared (IR) thermometer measurements, making it the perfect choice for HVAC professionals. Voltage Tester designed specifically for HVAC applications. Non-Contact Voltage Tester provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires, and AC voltage in security, entertainment, communications, environmental control, and irrigation systems. Detects AC voltage from 12 to 1000V with visual and audible indicators. 4:1 distance-to-spot ratio IR thermometer with user selectable Degrees Fahrenheit or Degrees Celsius from -22 to 482-Degree Fahrenheit (-30 to 250-Degree Celsius). Convenient laser pointer to target measurement area for temperature measurement. Backlit LCD display with 0.1-Degree resolution. Auto power-off conserves and extends battery life. Screw-thread battery cap with O-ring ensures dust and water resistance. Lightweight, compact tool with pocket clip provides easy storage and quick access.
View Full Product DetailsKlein Tools NCVT-4IR is a voltage tester that provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires; as well as infrared (IR) thermometer measurements, making it the perfect choice for HVAC professionals. Voltage Tester designed specifically for HVAC applications. Non-Contact Voltage Tester provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires, and AC voltage in security, entertainment, communications, environmental control, and irrigation systems. Detects AC voltage from 12 to 1000V with visual and audible indicators. 4:1 distance-to-spot ratio IR thermometer with user selectable Degrees Fahrenheit or Degrees Celsius from -22 to 482-Degree Fahrenheit (-30 to 250-Degree Celsius). Convenient laser pointer to target measurement area for temperature measurement. Backlit LCD display with 0.1-Degree resolution. Auto power-off conserves and extends battery life. Screw-thread battery cap with O-ring ensures dust and water resistance. Lightweight, compact tool with pocket clip provides easy storage and quick access.
View Full Product Details