Loctite 49

Sanding Sponge, Sides Dual, Abrasive Material Silicon Carbide, Grade Extra Coarse/Medium, Grit 36/80, Length 4 in, Width 2 3/4 in, Thickness 1 in, Color Gray

Instant Adhesive, Adhesive Color Clear, Container Size 0.1 fl oz, Container Type Tube, Cure Method Humidity, Maximum Viscosity 60 cps, Minimum Viscosity 20 cps, Series 495, Built-in Dispenser Type No Dispenser/Applicator, Compatible Accelerator Loctite SF 712, Features Low Viscosity, Materials Bonded Metal, Plastic, Rubber, Primary Applications Plastics, Standards 29 CFR 1910.1200, A-A-3097, Electrically Insulating Yes, Gap Fill 0.004 in, Impact Resistant No, Interior/Exterior Interior Only

Sanding Sponge, Sides Dual, Abrasive Material Silicon Carbide, Grade Medium/Fine, Length 4 in, Width 2 3/4 in, Thickness 1 in, Color Gray, Package Quantity 6

Angled Sanding Sponge, Sides Dual, Abrasive Material Aluminum Oxide, Grade Medium/Fine, Length 4 7/8 in, Width 2 7/8 in, Thickness 1 in, Color Gray

Sanding Sponge, Sides Dual, Abrasive Material Silicon Carbide, Grade Medium/Fine, Grit 80/120, Length 4 in, Width 2 3/4 in, Thickness 1 in, Color Gray

Sanding Sponge, Sides Dual, Abrasive Material Aluminum Oxide, Grade Medium, Grit 60, Length 4 1/2 in, Width 2 11/16 in, Thickness 1 in, Color Blue

Drywall Sanding Sponge, Sides Dual, Abrasive Material Aluminum Oxide, Grade Medium/Fine, Length 3 3/4 in, Width 2 5/8 in, Thickness 1 1/8 in, Color Black, Package Quantity 24

Sanding Sponge, Sides Dual, Abrasive Material Aluminum Oxide, Grade Very Fine, Grit 180, Length 4 1/2 in, Width 2 11/16 in, Thickness 1 in, Color Blue

Sanding Sponge, Sides Dual, Abrasive Material Aluminum Oxide, Grade Fine, Grit 100, Length 4 in, Width 2 3/4 in, Thickness 1/2 in, Color Gray

Contour Sanding Sponge, Sides Dual, Abrasive Material Aluminum Oxide, Grade Super Fine, Length 5 1/2 in, Width 4 1/2 in, Thickness 3/16 in, Color Gray, Package Quantity 20

Threadlocker, Threadlocker, Threadlocker Strength Medium, Threadlocker Color Blue, Threadlocker Disassembly Removable, Physical Form Liquid, Threadlocker Container Bottle, 50 mL, Chemical Type Anaerobic, For Fastener Dia. 1/4 in to 3/4 in, Begins to Harden 5 min, Series 242, Gap Fill 0.005 in, Full Cure 24 hr, Temp. Range -65 Degrees to 300 Degrees F, Flash Point Greater Than 93.3 Degrees C, Specific Gravity 1.1, Viscosity 1200 to 5000 cP, Removable With Hand Tools