Milwaukee 2738-20

Milwaukee Tool continues to expand its 12 Volt lithium-ion system with the introduction of the new M12 variable speed polisher/sander. Optimized to provide the fastest and most precise detail work, the new tool performs the work of two tools in one by easily switching between polishing and sanding modes. As the most compact cordless polisher on the market, the M12 polisher/sander is the perfect complement to a full size polisher for a faster finish. Featuring dual mode control and a variable speed trigger, the M12 polisher/sander delivers increased user control, regardless of the application. A tool-free accessory change allows the user to quickly change between polishing and sanding accessories.

Electric Right Angle Polisher, Size 7 and 9, No Load RPM 0 to 3500, Amps 12.0 A, Spindle Thread Size 5/8 In.-11, Cord 8 ft, Features All Ball-Bearing Construction, Controlled Finishing System (CFS), Electronic Module, Heat-Treated Precision-Cut Steel Gears, Bearings Ball, Tool Length 18 1/2 in, Tool Weight 6.7 lb, Handle Design Rat Tail, Speed Type Variable, Switch Type Trigger, Includes 2 Position Side Handle, Rubber Backing Pad. The DWP849 7" / 9" Variable Speed Polisher has a powerful 12 Amp motor with ball Bearing construction and electronic control to deliver desired finish results. Variable speed trigger allows user to control speed from 0 to dialed maximum setting.

Electric Right Angle Polisher, Size 7, No Load RPM 600 to 3000, Amps 10.0 A, Spindle Thread Size 5/8 in, Cord 8 ft, Features Lock On Button, Side Handle, Speed Control, Soft Start, Variable Speed, Bearings Ball and Needle, Tool Length 18 1/2 in, Tool Weight 6.6 lb, Handle Design Rat Tail, Speed Type Variable, Switch Type Trigger, Includes Hook and Loop Pad and Wrench

Electric Right Angle Polisher, Size 7 and 9, No Load RPM 0 to 3500, Amps 12.0 A, Spindle Thread Size 5/8 In.-11, Cord 8 ft, Features All Ball-Bearing Construction, Controlled Finishing System (CFS), Electronic Module, Heat-treated, Precision-cut Steel Gears, Soft Start, Wool Ingestion Shields; Non Mar Rubber Gear Case Cover, Bearings Ball, Tool Length 17 5/16 in, Tool Weight 3.1 lb, Handle Design Rat Tail, Speed Type Variable, Switch Type Trigger. The DWP849X 7" / 9" Variable Speed Polisher with Soft Start has a powerful 12 Amp motor with ball Bearing construction and electronic control to deliver desired finish results. Variable speed trigger allows user to control speed from 0 to dialed maximum setting.

Electric Polisher, Size 7, No Load RPM 0 to 3000, Amps 10.0 A, Spindle Thread Size 5/8 In.-11, Cord 8 ft, Features Gear Housing, Lock On Switch, Rubberized Loop Handle, Soft Start, Variable Speed, Tool Length 18 1/2 in, Tool Weight 7.0 lb, Handle Design Rat Tail, Speed Type Variable, Switch Type Trigger, Includes 7 in Backing Pad, Blade Wrench, Contractor Bag, 7 in Compounding Wool Bonnet, 7 in Polishing Wool Bonnet

With a 7-inch pad that works up to 5, 000 RPM, the speed of this air angle sander will have you breezing through every job. The side handle exhaust blows air away from the work area so you never have to worry about debris getting in your space. Equipped with a heavy duty motor that is ready to handle tough jobs so you’ll perform well any time you use it. This powerful sander will deliver reliable output time and time again and is backed by a 1-year warranty.

This Milwaukee 18 V lithium-ion battery works on the M18™ cordless tool system and has 3.0 amp hours of run-time. This battery powers over 40 Milwaukee M18™ cordless tools. Managed by Milwaukee's exclusive REDLINK™ Intelligence, the battery features overload protection, a temperature management system, individual cell voltage monitoring, discharge protection and a battery FUEL™ gauge.

The Milwaukee 1-5/8 in. electromagnetic drill will deliver faster set-up, cutting and drilling. It’s 13 amp motor delivers the fastest drilling w/ annular cutters or twist drill bits. Equipped with a 2-speed gear box the tool can be adjusted tool-free between annular cutters at 475 RPM and twist drill bits at 730 RPM.