Milwaukee 48-62-3010

Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed for cutting asphalt or hard ground (do not use for concrete). This chisel is specifically designed for SDS-Max rotary hammers and should be used in hammer only mode.

The MILWAUKEE® SDS-MAX SLEDGE™ 3" Scaling Chisel stays sharper longer. The reinforced edges deliver maximum durability and reduced wear over the life of the chisel, engineered for sharpness to increase productivity. The wide tip is optimized for larger surface areas, ideal for removing concrete, mortar, rust, cutting troughs, and asphalt. No re-sharpening or re-hardening is necessary for reduced downtime. High grade forged steel for maximum durability and longer life in concrete demolition over standard Milwaukee chisels. For use with SDS MAX rotary hammers.

Milwaukee Tool has a full line of demolition steel accessories with a variety of shanks (SDS-Plus, SDS-Max, spline or round hex, 3/4 hex, and 1-1/8 collared hex with notch). The Milwaukee 48-62-2020 is a 1 in. x 12 in. Spline round hex demo flat chisel. This demolition steel hammer accessory is ideally used with Milwaukee 2 in. Spline drive rotary hammer 5340 - 21. made from forged high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete.

Hammer Bit Grease

Brush Set, For Use With Mfr. Model Number 11 223 EVS, Fits Brand Bosch

Flat Chisel, Shank Type SDS Max, Overall Length (In.) 12 in, Shank Size (In.) 23/32 in, Shank Length (In.) 4 1/2 in, Length (In.) 12 in, Blade Width (In.) 1 in, For Use With Hammer Drill, Application General Chipping Work

Spline Drive Demolition Tool, Type Flat Chisel, Overall Length (In.) 12 in, Blade Width (In.) 1 in, For Use With All Spline Rotary Hammers, Application Chipping Work

Demolition Hammer Bit, Type Scaling Chisel, Shank Type Spline, Overall Length (In.) 12 in, Shank Size (In.) 3/4 in, Blade Width (In.) 2 in, For Use With Spline Drive Hammers, Application Removing Surface Material. These Spline Chisel Bits are designed for general purpose, with a wide range of products available to meet the demands of the most common concrete demolition jobs.

Rotary Hammer Kits, Rotary Hammer Kit, SDS Plus, No Load RPM 0 to 1100, Blows per Minute 0 to 4500, 8.0 A Amps, Voltage 120 V, Solid Bit Capacity 1 in, Core Bit Capacity 3 1/8 in, Stop Rotation Yes, Reversing No, Impact Energy 2.1 ft-lb, Tool Length 16 5/8 in, Tool Weight 7.1 lb, Cord 13 ft, Features 40 Bit Angle Settings, Anti-Vibration Technology (AVT(R)), Hammer Function Selector, Variable Speed Trigger, Includes Carrying Case, Depth Rod, Side Handle

Rotary Hammer Kits, Rotary Hammer Kit, SDS Plus, No Load RPM 0 to 1100, Blows per Minute 0 to 4500, 7.0 A Amps, Voltage 120 V, Solid Bit Capacity 1 1/8 in, Core Bit Capacity 3 1/8 in, Stop Rotation Yes, Reversing Yes, Impact Energy 2.1 ft-lb, Tool Length 12 5/8 in, Tool Weight 7.7 lb, Cord 10 ft 2-Cond., Features 3 Functions, Electronic Variable Speed, Standards CSA Certified, UL Listed, Includes Carrying Case, Depth Rod, Side Handle

Delivers up to 2.5X more run-time, 20% more power and 2X more life than standard lithium-ion batteries. The M18™ REDLITHIUM™ XC 5.0 extended capacity battery pack features superior pack construction, electronics, and performance to deliver more work per charge and more work over the life of the pack than any battery on the market.