Milwaukee 49-22-8510

Right Angle Attachment, Accessory Type Right Angle Attachment, For Use With 39RV80, 39RV92, 39RW18, 54DD15, 55AC86, 55CJ60, Overall Length 8 in. DEWALT® IMPACT READY® Right Angle Attachment provides users with best-in-class performance and accessibility for close-quarter fastening and drilling applications, due to its compact 1.5” front-to-back footprint and metal-gear case design. Robust magnetism is projected through the unit to give users fastener retention, enhancing the overall user experience and functionality.

Right Angle Attachment, Overall Length 12 in, For Use With 18 to 20V Impact Driver and Drill Tool Brands, Impact Rated Yes. With a 12” Right Angle Flex Shaft, DEWALT Bit Holders enable users to reach nearly any hard-to-reach space. A Rapid Load™ head enables fast, easy bit changes, and each fastener is supported by a magnet for accurate alignment. A side handle offers additional leverage and support.

Hex Key Set, Tip Size .050 in, 1.5 mm, 1/16 in, 1/4 in, 1/8 in, 10 mm, 2 mm, 2.5 mm, 3 mm, 3/16 in, 3/32 in, 3/8 in, 4 mm, 5 mm, 5/16 in, 5/32 in, 5/64 in, 6 mm, 7/32 in, 7/64 in, 8 mm, 9/64 in, Black Oxide, 22, Plastic Holder, Long, Hex, 2, No, 2 27/32 in to 6 3/4 in, No, No

Quick Change Right Angle Attachment, Accessory Type Angle Adapters, For Use With Specially suited for Metabo PowerMaxx BS Quick and BS 18 Quick Series, Impact Rated No, Overall Length 3 1/8 in

The Milwaukee® Shockwave™ 40pc Impact Drill & Drive Set is the Most Durable, Best Fitting driver bits on the market. The Wear Guard Tip™ increases wear resistance, protecting the fit over the life of the impact bit. The Shockzone™ is optimized for each tip type and length of driver bit to absorb peak torque and prevent breaking. The driver bits have Custom Alloy76™ for a customized steel and heat treatment per tip type to extend driver bit life, providing up to 50X life. The Milwaukee Shockwave™ driver bits are built to provide extreme durability for the most demanding applications.

The 2767 M18 FUEL™ high torque 1/2 in. impact wrench with friction ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1, 000ft-lbs of fastening torque and 1400ft-lbs of nut-busting torque. With 2X faster removal speed, users will be able to get the job done faster and be more productive throughout their day. By providing the industry’s most compact cordless high torque impact wrench at 8.39 in. in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL™ with bolt removal mode gives users the most control over their fasteners. Bolt removal mode gives the user more control when removing fasteners by slowing to 750 RPM once the fastener has been busted loose. This tool offers quick, tool-free socket changes with a 1/2 in. friction ring anvil. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.

The Milwaukee® SHOCKWAVE™ right angle adapter features an internal optimized Shockzone™ which absorbs peak torque and prevents breaking. The shanks is made from Custom Alloy76™ steel which is engineered for extended life. The hardened gears provide increased torque transfer for added durability. With only a 1.4 in. slim profile, the adapter allows access into the tightest of spaces. The SHOCKWAVE™ right angle adapter is designed for use in both impact drivers and drill driver and works with all 1/4 in. hex shank accessories.

The combination of a 3.75 in. total head length and an integrated electronic clutch make the M18™ cordless lithium-ion right angle drill the most compact 18 V right angle drill driver in the industry. A 3/8 in. single sleeve keyless chuck, extended multi-position trigger and up to 125 in-lbs of torque provide versatility, ease of use and power that is unmatched.

The 11 amp 4-1/2 in. small angle grinder (Slide, lock-on) delivers up to 3X more durability and up to 50% more power than the competition. With a 1, 400 MWO motor that powers through the toughest jobs, the 6146-33 is the perfect match for industrial users. Milwaukee's electronic advantage includes overload protection to maximize motor life, an electronic clutch that extends tool life and helps prevent bind-up, line lock-out that prevents automatic start-up after power loss, and soft start. Featuring a 100% tool-free design, this grinder allows the user to change all accessories, including hubbed product, without a wrench. in addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.

For use with the M18™ cordless 2-speed grease gun and M12™ cordless grease gun. May be compatible with competitive grease guns.

Offset Angle Driver, Accessory Type Angle Driver, For Use With 1/4 in Hex Driver, Impact Rated No, Overall Length 6 in