Milwaukee Chuck

This keyless 1/2 in. two sleeve all metal grip lock chuck with a 1/2 in. capacity is standard equipment on 14.4 Volt models (0516-20, 0516-22 and 0514-24). This chuck has hardened jaws for high gripping torque which prevents slippage when hammer drilling.

This keyed chuck has a 1/2 in. capacity with a 1/2 in. to 20 thread and comes with chuck key 48 to 66 - 2110. It can be used on reversing drills of matching capacities and threaded spindles.

This replacement 1/4 in. chuck comes as standard equipment with the 6540-1 2.4 Volt single speed cordless screwdriver as well as 2-speed models (6547-1 and 6547-22). This chuck allows the same flexibility in drilling and driving capabilities as a driver drill or corded drill with a three jawed chuck. Includes chuck key.

Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee.

This keyed chuck has a 1/2 in. capacity. Use with chuck key (48-66-3280) and key holder (48-66-4040). It can be used on reversing drills of matching capacities and threaded spindles.

The Milwaukee SDS and chuck adapter kit increases the usefulness of your rotary hammer to allow you to use straight shank twist bits in a drill only mode. The kit includes a 1/2 in. all-metal three-jawed chuck, an SDS to 1/2 - 20 thread adapter, a chuck screw and a chuck key.

This chuck key tightens the jaws of the 1/2 in. capacity chuck 48-66-1360, 48-66-1370, and 48-66-1381. Key holder 48-66-4040 should be used to attach this chuck key to the cord set.

This drill chuck kit converts tools with a no. 3 internal Morse taper spindle into a 3/4 in., 3-jawed chuck. This system is compatible with the Milwaukee super hole shooter drill 2404-1 as well as Milwaukee electromagnetic drill motors 4292-1 and 4297 - 1. kit includes a 48-66-2000 chuck and 48-07-0100 arbor.

The Megapro 9BP-I-HNDA Impact Bit, Imperial Nutsetters is a set of 5 nut drivers that are designed to give you access to fasteners in narrow spaces. This nut driver set has a hex size of 1/4 in., 5/16 in., 3/8 in., 7/16 in. and 1/2 in.. The Megapro 9BP-I-HNDA Impact Bit, Imperial Nutsetters is a great addition to your tool collection.

Drill Chuck, Threaded, Mounting Size 3/8 In.-24, Max. Drill Capacity 1/2 in

Drill Chuck, Hex, Mounting Size 1/4 in, Max. Drill Capacity 3/8 in. Easily change from fastening to drilling with a 1/4" hex quick connect. The DW0521 Quick Connect 3/8" Impact Chuck is built with all-metal construction for maximum durability.