Mobil 100817

This Mobil Hydraulic Oil is formulated for use in high pressure hydraulic systems, such as those containing vane, piston and gear pumps, where cold start up and high operating temperatures are typical. The Mobil 106128 Hydraulic Oil is a mineral based, SAE Grade 46, ISO Viscosity Grade 20 oil and comes in a 5 gallon container.

Specially formulated for power pumps maximum volumetric efficiency maximum heat transfer prevents cavitation anti-sludge, anti-rust, anti-foam additives Maximum film protective lubricity anti-oxidation additives High viscosity index ensures maximum lubricity over a wide range of operation temperatures.

Hydraulic Oil, ISO Viscosity Grade 5000, Base Oil Silicone, Container Size 1 gal, NSF Rating H1 Food Grade, Min. Operating Temp. -58 Degrees F, Max. Operating Temp. 392 Degrees F, Flash Point 572 Degrees F, Pour Point -45 Degrees C, Container Style Bottle, Color Clear, Timken OK Load Not Specified, Standards Meets Former USDA H1 Guidelines, NSF H1

General Purpose Lubricant, Wet, Sprayon, LU728, Net Fill 8.75 oz, Container Size 16 oz, Lubricant Container Aerosol Can, Synthetic Oil, PTFE Primary Additive, Min. Operating Temp. -40 Degrees F, Max. Operating Temp. 475 Degrees F, NSF Rating H1 Food Grade, 50 State VOC Compliant Yes, VOC Content 0 Percent, Lubricant Color Colorless, Odorless No, Non-Flammable Flammability, Non-Flammable, Flash Point 320 Degrees F, Standards Category Code H1, No USDA Certified Biobased Product

Hydraulic Ram, Single Acting, Low Profile, Steel, Nominal Capacity 10 ton, Max. Push Capacity 10 ton, Stroke Length 3/8 in, Nominal Stroke Length 3/8 in, Effective Push Area 2.24 sq in, Max. Pressure 10, 000 psi, Oil Capacity Push 0.98 cu in, Retracted Height 1.69 in, Extended Height 2.13 in, Outside Dia. 3.25 in x 2.19 in, Plunger Dia. 1.5 in, Center Hole Dia. 1 11/16 in, Series RSM, Includes Female Coupler, Dust Cap

Hydraulic Oil, ISO Viscosity Grade 32, SAE Grade 5W-20, Base Oil Vegetable Oil, Container Size 1 gal, NSF Rating Not Rated, Min. Operating Temp. -40 Degrees F, Max. Operating Temp. 250 Degrees F, Viscosity Index 213, Flash Point 385 Degrees F, Pour Point -49 Degrees F, Container Style Jug, Color Light Yellow, Timken OK Load Not Specified, Standards ASTM D-5864, EAL, ISO 15380, VGP

Way Oil, Container Size 5 gal, Pail, Base Formulation Mineral, SAE Grade 5W, ISO Grade 10, Oil Type Spindle Oils, Food Grade No, Application For High Speed Spindle, Plain and Anti-friction Bearings in Textile Machines, Precision Grinders and Other Machine Tools

Hydraulic Oil, ISO Viscosity Grade 32, SAE Grade 10, Base Oil Mineral, Container Size 5 gal, NSF Rating H1 Food Grade, Lubricant Additives Zinc, Max. Operating Temp. 150 Degrees C, Viscosity Index 106, Flash Point 212 Degrees C, Pour Point 10 Degrees C, Container Style Pail, Timken OK Load Not Specified, Standards FDA and H1 USDA, Application For High Pressure Hydraulic Systems, such as Food Processing Equipment, where a H1 approved oil is needed., Four-Ball Wear Not Specified

Way Oil, Container Size 5 gal, Pail, Base Formulation Mineral, SAE Grade 90, ISO Grade 220, Oil Type Way Oils, Food Grade No, Material Compatibility Wide Range of Way Material Combinations, Steel on Steel, Steel on Polymer, Application Machine Tool Slideway Systems