Powermatic Shaper

Shaper, 3HP 1PH 230V, 1/2IN 3/4IN

JWS-35X5-1, Shaper, 5HP 1PH 230V

PM2244 Drum Sander, 1-3/4HP, 115V

JWS-35X3-1, Shaper, 3HP 1PH 230V

Heavy Duty Spindle Shaper, 220V, 1 Phase

Wood Spindle Shaper, Voltage 220, 1 Phase, Spindle Dia. 3/4 In., 1 In., 1-3/4 In., No Load RPM 3600/5100/8000/10, 000, Table Size 35-1/2 In. x 28 In., Spindle Travel 3 In., 28 Amps, 5 HP, Port Size 4 In., Overall Width 32 In., Overall Depth 38 In., Overall Height 35 In.

Pm2700 Shaper, 3Hp, 1Ph Dro, Casters (Avail

Router Bit Set, Carbide Tipped, Number of Pieces 3, Fractional Inch, Rail, Raised Panel, Stile, Set

General Purpose Drill Presses, Floor Drill Press, Drive Type Belt, Swing 18 in, Spindle Taper JT3/MT2, Motor HP 1 hp, Capacity Steel Not Specified, Capacity Cast Iron Not Specified, Drilling Capacity Wood Not Specified, Power Down Feed Included No, Voltage 115/230, Amps AC 15.0/7.5, Number of Speeds Variable, Chuck Size 5/8 in, Spindle Speed 250 to 3000 rpm, Spindle Travel 6 in, Base Size 13-3/8 in x 20 in, Table Work Surface 20 in x 14 in, Hz 60, Phase 1, Number of T-Slots 0

Pm2700 Shaper, 5Hp, 1Ph Dro, Casters (Avail

Band Saw, Band Saw Type Vertical, Band Saw Operation Manual, Voltage 230V AC, Phase 1, Rectangular Cutting Capacity - Horizontal 14 in x 8 in, Throat Depth - Vertical 14.5 in, Round Cutting Capacity - Horizontal 14 in, SFPM Range 3100, Miter Angle Range 10 Degrees Left to 45 Degrees Right, Number of Speed Settings 1, Material Application Composite Materials, Plastic, Wood, Blade Length 12 ft 9 in, Max. Blade Width 1 in, Min. Blade Width 1/8 in, Cutting Capacity Square 14 in, Power Source Corded