Tjernlund Induced Draft Blowers
Our endless aisle includes tjernlund induced draft blowers and so much more!
Featured Product
- TJERNLUND
- Draft Inducer, 115, Aluminized Steel Housing and Blower Wheel
- Zoro #: G3198054 Mfr #: DJ-3
Draft Inducer, In-line, Vent Pipe Dia. (In.) 3 to 6, Voltage 115, 0.43 Amps, 35 W Watts, 1/70 hp HP, Height (In.) 7 5/8 in, Width (In.) 9 in, Depth (In.) 5 7/8 in, 2-5/8 x 7-1/8 Cut Out Required, Provides Positive Draft for Smokepipe and Aids Proper Exhaust of Combustion Gas., Construction Material Aluminized Steel Housing and Blower Wheel, Agency Compliance -, Replaces -, View Catalog Page For Selection Criteria, Not Applicable, N/A, N/A., Not Applicable, Not Applicable, 48727268, 36555217
- TJERNLUND
- Draft Inducer, 115, Aluminized Steel Housing and Blower Wheel
- Zoro #: G3198054 Mfr #: DJ-3
$114.39
Draft Inducer, In-line, Vent Pipe Dia. (In.) 3 to 6, Voltage 115, 0.43 Amps, 35 W Watts, 1/70 hp HP, Height (In.) 7 5/8 in, Width (In.) 9 in, Depth (In.) 5 7/8 in, 2-5/8 x 7-1/8 Cut Out Required, Provides Positive Draft for Smokepipe and Aids Proper Exhaust of Combustion Gas., Construction Material Aluminized Steel Housing and Blower Wheel, Agency Compliance -, Replaces -, View Catalog Page For Selection Criteria, Not Applicable, N/A, N/A., Not Applicable, Not Applicable, 48727268, 36555217
- View Full Product Details
Shop Tjernlund Induced Draft Blowers
- TJERNLUND
- Induced Draft Blower, 115, Aluminized Steel Housing and Blower Wheel
- Zoro #: G0255245 Mfr #: HS1
Induced Draft Blower, High Temperature, Vent Pipe Dia. (In.) 4 or 6, Inlet and Outlet Dia. (In.) 4, Voltage 115, 1.26 Amps, 95 W Watts, Height (In.) 7 7/8 in, Width (In.) 11 in, Depth (In.) 7 in, Used for Side Wall Venting Commercial Natural Gas or LP Fired Equipment Including Boilers, Water Heaters and Unit Heaters, Construction Material Aluminized Steel Housing and Blower Wheel, Agency Compliance ETL Listed to UL378 and CAN3-B255-M81, View Catalog Page For Selection Criteria
![TJERNLUND Induced Draft Blower, 115, Aluminized Steel Housing and Blower Wheel HS1]()
- TJERNLUND
- Induced Draft Blower, 115, Aluminized Steel Housing and Blower Wheel
- Zoro #: G0255245 Mfr #: HS1
$256.46Induced Draft Blower, High Temperature, Vent Pipe Dia. (In.) 4 or 6, Inlet and Outlet Dia. (In.) 4, Voltage 115, 1.26 Amps, 95 W Watts, Height (In.) 7 7/8 in, Width (In.) 11 in, Depth (In.) 7 in, Used for Side Wall Venting Commercial Natural Gas or LP Fired Equipment Including Boilers, Water Heaters and Unit Heaters, Construction Material Aluminized Steel Housing and Blower Wheel, Agency Compliance ETL Listed to UL378 and CAN3-B255-M81, View Catalog Page For Selection Criteria
- View Full Product Details
- TJERNLUND
- Draft Inducer, 115V, Aluminized Steel, 14 1/2 in H.
- Zoro #: G0357052 Mfr #: I
Draft Inducer, In-line, Vent Pipe Dia. (In.) 8 to 12, Voltage 115, 5.4 Amps, 1/4 hp HP, Height (In.) 14 1/2 in, Width (In.) 13 1/2 in, Depth (In.) 8 3/4 in, 4 x 12-3/4 Cut Out Required, Provides Positive Draft for Smokepipe and Aids Proper Exhaust of Combustion Gas., Construction Material Aluminized Steel Housing and Blower Wheel, Agency Compliance -, Replaces -, View Catalog Page For Selection Criteria, Not Applicable, N/A, N/A., Not Applicable, Not Applicable, 590765850710, 603653615357
![TJERNLUND Draft Inducer, 115V, Aluminized Steel, 14 1/2 in H. I]()
- TJERNLUND
- Draft Inducer, 115V, Aluminized Steel, 14 1/2 in H.
- Zoro #: G0357052 Mfr #: I
$414.82Draft Inducer, In-line, Vent Pipe Dia. (In.) 8 to 12, Voltage 115, 5.4 Amps, 1/4 hp HP, Height (In.) 14 1/2 in, Width (In.) 13 1/2 in, Depth (In.) 8 3/4 in, 4 x 12-3/4 Cut Out Required, Provides Positive Draft for Smokepipe and Aids Proper Exhaust of Combustion Gas., Construction Material Aluminized Steel Housing and Blower Wheel, Agency Compliance -, Replaces -, View Catalog Page For Selection Criteria, Not Applicable, N/A, N/A., Not Applicable, Not Applicable, 590765850710, 603653615357
- View Full Product Details
- TJERNLUND
- Induced Draft Blower, 115V, Sintered Iron, 9 1/4 in H.
- Zoro #: G0975317 Mfr #: HS2
Induced Draft Blower, High Temperature, Vent Pipe Dia. (In.) 6 or 8, Inlet and Outlet Dia. (In.) 6, Voltage 115, 1.51 Amps, 224 W Watts, Height (In.) 9 1/4 in, Width (In.) 11 1/2 in, Depth (In.) 8 1/2 in, - Cut Out Required, Used for Side Wall Venting Commercial Natural Gas or LP Fired Equipment Including Boilers, Water Heaters and Unit Heaters., Construction Material Aluminized Steel Housing and Blower Wheel, Agency Compliance ETL Listed to UL378 and CAN3-B255-M81, Replaces -
![TJERNLUND Induced Draft Blower, 115V, Sintered Iron, 9 1/4 in H. HS2]()
- TJERNLUND
- Induced Draft Blower, 115V, Sintered Iron, 9 1/4 in H.
- Zoro #: G0975317 Mfr #: HS2
$336.48Induced Draft Blower, High Temperature, Vent Pipe Dia. (In.) 6 or 8, Inlet and Outlet Dia. (In.) 6, Voltage 115, 1.51 Amps, 224 W Watts, Height (In.) 9 1/4 in, Width (In.) 11 1/2 in, Depth (In.) 8 1/2 in, - Cut Out Required, Used for Side Wall Venting Commercial Natural Gas or LP Fired Equipment Including Boilers, Water Heaters and Unit Heaters., Construction Material Aluminized Steel Housing and Blower Wheel, Agency Compliance ETL Listed to UL378 and CAN3-B255-M81, Replaces -
- View Full Product Details
- CORDEX
- Round Infrared Window,4 In.,100mm Dia.
- Zoro #: G4579662 Mfr #: IW4000
4 In. Round Infrared Window, Crystal Insert Size 100mm dia, Viewing Aperture Size 93mm dia, Viewing Aperture Area 6794 sq mm, Window Thickness 4 mm, NEMA Rating 3, 12, IP Rating 65, Gasket Maximum Temperature 250 Degrees C (482 Degrees F), Body Maximum Temperature 659 Degrees C (1218 Degrees F), Optic Maximum Temperature 1400 Degrees C (2552 Degrees F), Voltage Range Unlimited, Components IR Window, Cover, Body Material Aluminum, Includes Access Key, Drilling Template, Fixing Screws
![CORDEX Round Infrared Window,4 In.,100mm Dia. IW4000]()
- CORDEX
- Round Infrared Window,4 In.,100mm Dia.
- Zoro #: G4579662 Mfr #: IW4000
$309.994 In. Round Infrared Window, Crystal Insert Size 100mm dia, Viewing Aperture Size 93mm dia, Viewing Aperture Area 6794 sq mm, Window Thickness 4 mm, NEMA Rating 3, 12, IP Rating 65, Gasket Maximum Temperature 250 Degrees C (482 Degrees F), Body Maximum Temperature 659 Degrees C (1218 Degrees F), Optic Maximum Temperature 1400 Degrees C (2552 Degrees F), Voltage Range Unlimited, Components IR Window, Cover, Body Material Aluminum, Includes Access Key, Drilling Template, Fixing Screws
- View Full Product Details
- FASCO
- Induced Draft Furnace Blower, 208/230, Aluminum Steel, 7 3/4 in H.
- Zoro #: G7533416 Mfr #: A150
Induced Draft Furnace Blower, Replacement, Voltage 208/230, .50 Amps, 81 W Watts, 1/35 hp HP, Height (In.) 7 3/4 in, Width (In.) 8 3/4 in, Depth (In.) 6 in, Gas Furnaces, Construction Material Aluminum Steel, Agency Compliance UL, CSA, Replaces Trane C661452P01, X38080029010¿Fasco 70217833, 70218928, Product Used as Direct OEM Replacement Only. Any Other use Constitutes a Misapplication, Which Voids the Warranty and May Create Unsafe Conditions, Fits Brand Trane
![FASCO Induced Draft Furnace Blower, 208/230, Aluminum Steel, 7 3/4 in H. A150]()
- FASCO
- Induced Draft Furnace Blower, 208/230, Aluminum Steel, 7 3/4 in H.
- Zoro #: G7533416 Mfr #: A150
$125.86Induced Draft Furnace Blower, Replacement, Voltage 208/230, .50 Amps, 81 W Watts, 1/35 hp HP, Height (In.) 7 3/4 in, Width (In.) 8 3/4 in, Depth (In.) 6 in, Gas Furnaces, Construction Material Aluminum Steel, Agency Compliance UL, CSA, Replaces Trane C661452P01, X38080029010¿Fasco 70217833, 70218928, Product Used as Direct OEM Replacement Only. Any Other use Constitutes a Misapplication, Which Voids the Warranty and May Create Unsafe Conditions, Fits Brand Trane
- View Full Product Details
- FASCO
- Draft Inducer Blower, 115V, Plastic, 9 7/64 in H.
- Zoro #: G8518702 Mfr #: A225
Draft Inducer, Inlet and Outlet Dia. (In.) 2.0/1.7, Voltage 115, Height (In.) 9 7/64 in, Width (In.) 6 25/32 in, Depth (In.) 10 29/32 in, Furnace, Construction Material Plastic, Agency Compliance UL, CSA Motor Only, Replaces York 024-34558-000, 17503, Fasco 702111577, 702111577S, 702111830, Fits Brand York, For Use With Mfr. Model Number 7021-11577, 17503, 7021-11577S, 7021-11830, 024-34558-000, 76, 68, 65, 60, 54
![FASCO Draft Inducer Blower, 115V, Plastic, 9 7/64 in H. A225]()
- FASCO
- Draft Inducer Blower, 115V, Plastic, 9 7/64 in H.
- Zoro #: G8518702 Mfr #: A225
$149.17Draft Inducer, Inlet and Outlet Dia. (In.) 2.0/1.7, Voltage 115, Height (In.) 9 7/64 in, Width (In.) 6 25/32 in, Depth (In.) 10 29/32 in, Furnace, Construction Material Plastic, Agency Compliance UL, CSA Motor Only, Replaces York 024-34558-000, 17503, Fasco 702111577, 702111577S, 702111830, Fits Brand York, For Use With Mfr. Model Number 7021-11577, 17503, 7021-11577S, 7021-11830, 024-34558-000, 76, 68, 65, 60, 54
- View Full Product Details
- FIELD CONTROLS
- Power Venter, 115, Aluminum Steel, 9 in H., 4 Inlet and Outlet Dia.
- Zoro #: G2471001 Mfr #: SWG-4HD
Power Venter, Power Venter, Vent Pipe Dia. (In.) 4, Inlet and Outlet Dia. (In.) 4, Voltage 115, 1.7 Amps, 138 W Watts, Height (In.) 9 in, Width (In.) 9 in, Depth (In.) 9 7/32 in, 7-1/4 in Cut Out Required, Gas/Oil Heating, Construction Material Aluminum Steel, Agency Compliance ETL, Used to Exhaust Heating Appliances, Includes Power Vent and Backing Plate, 170, 000, 550 Degrees F, 100
![FIELD CONTROLS Power Venter, 115, Aluminum Steel, 9 in H., 4 Inlet and Outlet Dia. SWG-4HD]()
- FIELD CONTROLS
- Power Venter, 115, Aluminum Steel, 9 in H., 4 Inlet and Outlet Dia.
- Zoro #: G2471001 Mfr #: SWG-4HD
$328.30Power Venter, Power Venter, Vent Pipe Dia. (In.) 4, Inlet and Outlet Dia. (In.) 4, Voltage 115, 1.7 Amps, 138 W Watts, Height (In.) 9 in, Width (In.) 9 in, Depth (In.) 9 7/32 in, 7-1/4 in Cut Out Required, Gas/Oil Heating, Construction Material Aluminum Steel, Agency Compliance ETL, Used to Exhaust Heating Appliances, Includes Power Vent and Backing Plate, 170, 000, 550 Degrees F, 100
- View Full Product Details
- FIELD CONTROLS
- Draft Control,50.3 N Capcty,7 to 8in dia
- Zoro #: G2470548 Mfr #: 8"MG1
Barometric Draft Control, Diameter 7 in to 8 in, Galvanized Steel, Nominal Capacity 50.3, Silver, Length 2 5/8 in, Width 8 11/16 in, Height 8 11/16 in, Application Gas
![FIELD CONTROLS Draft Control,50.3 N Capcty,7 to 8in dia 8"MG1]()
- FIELD CONTROLS
- Draft Control,50.3 N Capcty,7 to 8in dia
- Zoro #: G2470548 Mfr #: 8"MG1
$98.48Barometric Draft Control, Diameter 7 in to 8 in, Galvanized Steel, Nominal Capacity 50.3, Silver, Length 2 5/8 in, Width 8 11/16 in, Height 8 11/16 in, Application Gas
- View Full Product Details
- SLOAN
- Guide Assembly, Toilets and Urinals
- Zoro #: G2675154 Mfr #: A163A
Toilets and Urinals
![SLOAN Guide Assembly, Toilets and Urinals A163A]()
- SLOAN
- Guide Assembly, Toilets and Urinals
- Zoro #: G2675154 Mfr #: A163A
$4.10Toilets and Urinals
- View Full Product Details
- GENTEQ
- Electric Motor,ECM,Open Air-Over,3/4 HP
- Zoro #: G5666184 Mfr #: 6207E
ECM Direct Drive Blower Motor, Single Phase, Motor Design ECM, 3/4 HP, Nameplate RPM 1, 075, No. of Speeds 5, Voltage 208-230V AC, Full Load Amps 6.0, 48 Frame, Usable @ 208V Yes, Usable @ 200V No, Motor Thermal Protection None, 60 Hz, Motor Service Factor 1, Ins. Class B, Motor Shaft Rotation CW/CCW, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, Lead Length 42 in, Motor Enclosure Design Open Air-Over, Motor Mounting Type Round Base, Motor Mounting Position Horizontal
![GENTEQ Electric Motor,ECM,Open Air-Over,3/4 HP 6207E]()
- GENTEQ
- Electric Motor,ECM,Open Air-Over,3/4 HP
- Zoro #: G5666184 Mfr #: 6207E
$367.52ECM Direct Drive Blower Motor, Single Phase, Motor Design ECM, 3/4 HP, Nameplate RPM 1, 075, No. of Speeds 5, Voltage 208-230V AC, Full Load Amps 6.0, 48 Frame, Usable @ 208V Yes, Usable @ 200V No, Motor Thermal Protection None, 60 Hz, Motor Service Factor 1, Ins. Class B, Motor Shaft Rotation CW/CCW, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, Lead Length 42 in, Motor Enclosure Design Open Air-Over, Motor Mounting Type Round Base, Motor Mounting Position Horizontal
- View Full Product Details
- DAYTON
- HVAC Motor,1/20 HP,1550 rpm,208-230V,3.3
- Zoro #: G1551033 Mfr #: 71903581M
HVAC Motor, Single Phase, Motor Design Permanent Split Capacitor, 1/20 HP, Nameplate RPM 1, 550, No. of Speeds 1, Voltage 208-230V AC, Full Load Amps 0.40-0.38, 3.3 in Frame, Usable @ 208V Yes, Usable @ 200V No, Motor Thermal Protection Auto, 60/50 Hz, Motor Service Factor 1, Ins. Class B, Motor Shaft Rotation CW/CCW, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, Motor Enclosure Design Open Air-Over, Motor Mounting Type Stud, Motor Mounting Position All Angle, Number of Shafts 1
![DAYTON HVAC Motor,1/20 HP,1550 rpm,208-230V,3.3 71903581M]()
- DAYTON
- HVAC Motor,1/20 HP,1550 rpm,208-230V,3.3
- Zoro #: G1551033 Mfr #: 71903581M
$51.45HVAC Motor, Single Phase, Motor Design Permanent Split Capacitor, 1/20 HP, Nameplate RPM 1, 550, No. of Speeds 1, Voltage 208-230V AC, Full Load Amps 0.40-0.38, 3.3 in Frame, Usable @ 208V Yes, Usable @ 200V No, Motor Thermal Protection Auto, 60/50 Hz, Motor Service Factor 1, Ins. Class B, Motor Shaft Rotation CW/CCW, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, Motor Enclosure Design Open Air-Over, Motor Mounting Type Stud, Motor Mounting Position All Angle, Number of Shafts 1
- View Full Product Details
