Walter Surface Technologies Abrasive Wheel Adapters

ADAPTOR

Cut-off Wheel Mandrel Adapter, Fits Hole (In.) 1/4, Shank Dia. (In.) 1/4 in, Length (In.) 2 1/8 in, Max. Wheel Width (In.) 1/4 in, Washer O.D. (In.) 3/4 in, Includes Screws to Mount 1/4 Holes

Flange Set, Arbor Hole (In.) 5/8-11, Max. RPM 8, 000 RPM, Thread Size 5/8-11, For Use With Type 1 Cutting Wheel. The D284932 Type 1 Flange Set has a backing flange and clamp nut enabling use with Type 1 wheels.

Disc Backup Pad, Disc Diameter 4 1/2 in, Face Mounting Type Hook-and-Loop, Back Mounting Type Threaded Arbor Hole, Back Mounting Size 5/8 In.-11, Max. RPM 13, 000 RPM, Density Hard, Vacuum Hole Design Non-Vacuum, Thickness 1/8 in, Body Material Foam

Coating Removal Disc, Hook-and-Loop, Series CR-DH, Diameter 7 in, Thickness 1/64 in, Mounting Type Backing That Mounts to Hook-and-Loop Pads, Abrasive Material Silicon Carbide, 36 Grit, Max. RPM 6, 000 RPM, Clean Rust and Paint

Unitized Wheel, Deburring and Finishing, Series XL-UW, Diameter 6 in, Width 1/2 in, Mounting Type Arbor Hole, Mounting Size 1/2 in, Abrasive Material Silicon Carbide, Soft (2) Density, Fine Grade, Max. RPM 5, 000 RPM, Gray

Flange, Arbor Hole (In.) 5/8, Max. RPM -, For Use With Flaring Cup Wheel. The D284933 Type 11 Flaring Cup wheel backing flange allows for use of flaring cup wheels on large angle grinders.

UA-4 Power Brush Adapter, 3/8" Arbor, 1/4" Stem Diameter, Left Hand Threaded, 4" Max Brush Dia.

Disc Backup Pad, Disc Diameter 1 in, Face Mounting Type TR, Back Mounting Type Threaded Arbor Hole, Back Mounting Size 1/4 In.-20, Max. RPM 30, 000 RPM, Density Medium, Vacuum Hole Design Non-Vacuum, Body Material Rubber

Flap Disc, Abrasive Material Zirconia Alumina, Abrasive Type Coated, Series Enduro-Flex, Max. RPM 13, 300 RPM

Abrasive Cut-Off Wheel, Thickness 0.0469 in, Series ZIP, Diamond Knockout No, Application Stainless Steel, Steel