Liquidynamics Inc.

Spring Return Hose Reel, 3/4 in Hose Dia., 25 ft Length, 1,700 psi

Liquidynamics Inc. Spring Return Hose Reel,  3/4 in Hose Dia.,  25 ft Length,  1,700 psi 43002DEF-25
Hover or click to zoom Tap to zoom
$620.40
  • Duty Rating: Heavy Duty, Industrial
  • Finish - Hose Reels: Powder Coated
  • Hose Included: Yes
See full product details
This item ships free.

Total: $620.40

Liquidynamics Inc. #43002DEF-25 Specifications

  • Duty Rating: Heavy Duty, Industrial
  • Finish - Hose Reels: Powder Coated
  • Hose Included: Yes
  • Hose Inside Dia.: 3/4 in
  • Hose Length: 25 ft
  • Housing Material: Stainless Steel
  • Max. Pressure: 1,700 psi
  • Mounting: Floor, Wall, Ceiling, Bench and Vehicles
  • Overall Length: 16 in
  • Overall Width: 8 1/2 in
  • Application: Diesel Exhaust Fluid, Water
  • Hose Material: EPDM
  • Hose Outlet: 3/4" (M)NPT
  • Finish: Powder Coated
  • Drive Type: Spring Return
  • Bearings: Permanently Lubricated
  • Includes: Hose Mounted on Reel with ball stop
  • Overall Height: 15 in
  • Latch: Constant Tension
  • Reel Inlet: 3/4 in
  • Hose Ends: 3/4 in MNPT
  • Item: Spring Return Hose Reel
  • Seal Type: Urethane
  • Swivel Material: Stainless Steel
  • Max. Temp.: 150 Degrees F
  • Enclosed Reel: No
  • Drive Type - Hose Reels: Spring Return
  • Food Grade: No
  • Hose Outside Dia.: 3/4 in
  • Overall Depth: 18 1/2 in
  • Diesel Exhaust Fluid Compatible: Yes
  • Not Recommended Chemicals: Acetic Acid (Glacial), Acetic Acid 80%, Chromic Acid 5%, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 50%, Formic Acid, Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrochloric/Muriatic Acid (100%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Phosphoric Acid (40% Solution), Sulfuric Acid (to 10%), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Acetone, Methyl Ethyl Ketone (MEK), Methyl (Methanol), Calcium Chloride, Cyclohexane, Gasoline, Heptane, Hexane, Kerosene, Stoddard Solvent (Mineral Spirits), Diesel Fuel, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Ethyl Acetate, Biodiesel, Hydrazine, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Lacquer Thinners, Toluene, Xylene, Motor Oil, Methyl Chloride, Sodium Bisulfate, Trichlorethylene (50%), E85, Anhydrous Ammonia, Ammonia (Liquids), Automatic Transmission Fluid, Brake Fluid, Fertilizers, Fungicides, Herbicides, Lithium Grease, Naphtha, Paint, Paint Thinner, Pesticides, Turpentine, Windshield Washer Fluid
  • Compatible Chemicals: Acetic Acid 20%, Citric Acid 50%, Ethyl (Ethanol), Isopropyl (Isopropanol), Antifreeze (Coolant), Ethylene Glycol, Glycerin, Sodium Bicarbonate (10%), Formaldehyde 40%, Formaldehyde, Ammonium Hydroxide, Sodium Hypochlorite/Bleach (to 20%), Potassium Hydroxide (50%), Fresh Water, Salt Water, Deionized Water, Sodium Bisulfite, DEF
  • Agency Compliance: ISO 22241
  • DEF Compatible: Yes
  • For Media Type: Acetic Acid, Citric Acid, Ethanol, Isopropanol, Antifreeze, Ethylene Glycol, Glycerin, Sodium Bicarbonate, Formaldehyde, Ammonium Hydroxide, Bleach, Potassium Hydroxide (50%), Water, Sodium Bisulfite, DEF
  • Grease: NT
  • Gear Lube: NT
  • Reel Width: 4 1/4 in
  • Features: Double Arm
  • Overall Dimensions: 16 in L x 8 1/2 in W x 15 in H
  • Swivel Inlet Type: NPT
  • Swivel Outlet Type: NPT
  • Hose End Configuration: 3/4 in MNPT
  • Latch Type: Spring Loaded
  • Hose Reel Primary Application: DEF
  • For Dual Hose: No
  • Hose Fitting A Size: 3/4 in
  • Hose Fitting A Type: NPT
  • Swivel Outlet Gender: Male
  • Hose Fitting A Gender: Male
  • Fasteners Included: No
  • Mount Hole Diameter: 1/2 in
  • Mount Base Height: 11/64 in
  • Reel Diameter: 11 in
  • Hose Fitting B Gender: Male
  • Includes Hose Stop: Yes
  • Hose Fitting B Size: 3/4 in
  • Hose Reel Type: Wall Mount Hose Reel
  • Includes Hose: Yes
  • Hose Tube Material: EPDM
  • Maximum Operating Pressure: 210 psi
  • Pedestal Type: Dual Pedestal
  • Spiral Hose Guard: No
  • Minimum Operating Temperature: -30 Degrees F
  • Fitting Size: 3/4 in x 3/4 in
  • Base Motion Type: Stationary
  • Weight: 44 lb
  • Number of Mount Holes: 4
  • Standards: CE
  • Twin Hose Compatible: No
  • Mounting Hole Center to Center Height: 6 3/4 in
  • Enclosed: No
  • Hose Fitting A Material: Polypropylene
  • Swivel Outlet Thread Size: 3/4 in - 14
  • Includes Leader Hose: No
  • Hose Color: Black
  • Reel Material: Steel
  • Reel Finish: Powder Coated
  • Swivel Inlet Thread Size: 3/4 in - 14
  • Speed Limited Retraction: No
  • Number of Guide Arms: Double Arm
  • Fitting Type: NPT x NPT
  • Reel Color: Gray
  • Maximum Operating Temperature: 140 Degrees F
  • Corrosion-Resistant: Yes
  • Hose Cover Material: EPDM
  • Swivel Inlet Gender: Female
  • Swivel Inlet Size: 3/4 in
  • Swivel Outlet Size: 3/4 in
  • Bearing Construction: Permanently Lubricated
  • Hose Capacity: 25 ft (3/4 in I.D.)
  • Hose Fitting B Material: Polypropylene
  • Hose Fitting B Type: NPT
  • Mount Base Width: 6 7/8 in
  • Mounting Hole Center to Center Width: 4 3/4 in
  • Country of Origin (subject to change): Italy

Description

Spring Return Hose Reel, DEF, 210 psi, Hose Capacity 25 ft (3/4 in I.D.), Drive Type Spring Return, Enclosed No, Includes Hose Yes, Hose Inside Dia. 3/4 in, Hose Length 25 ft, Reel Material Steel, Mounting Location Bench, Ceiling, Truck, Wall, Speed Limited Retraction No, Overall Height 15 in, Overall Length 16 in, Overall Width 8 1/2 in, Corrosion-Resistant Yes, For Dual Hose No, Hose Color Black, Hose Cover Material EPDM, Hose Fitting A Gender Male

Restrictions and Compliance

Reviews of Liquidynamics Inc. #43002DEF-25