1/3 HP 1-1/2" F Submersible Sump Pump 115V Diaphragm
- Zoro #: G3010987
- Mfr #: 6-CIA
$157.62
- Max. Head: 18.0 ft
- Max. Head - Pumps: 18 ft.
- Shaft Seal Material - Pumps: Carbon, Ceramic
Little Giant #6-CIA Specifications
| |
Max. Head: 18.0 ft | Max. Head - Pumps: 18 ft. |
Shaft Seal Material - Pumps: Carbon, Ceramic | Switch Type - Pumps: Diaphragm |
Amps - Pumps: 9.00 | Max. Dia. Solids: 1/8" |
Cord Length - Pumps: 9 ft. | Item - Sump Pumps: Submersible Sump Pump |
NEC Cord Designation: SJTW | Alarm Included: No |
Off Point: 1 in to 4 in | Housing Material: Epoxy Coated Cast Iron |
Switch Type: Diaphragm | Shaft Seal: Nitrile with Carbon and Ceramic Faces |
GPM of Water @ 10 Ft. of Head: 29 | Diameter: 9-1/2" |
Cord Length: 10 ft | Max. Diameter Solids: 1/8 in |
Alarm: No | Hz: 50/60 Hz |
Amps: 9 A | GPM of Water @ 15 Ft. of Head: 13 |
Motor RPM: 1500 | Max. Liquid Temp.: 140 Degrees F |
Mechanical Seal: CRB/CMC | Pump Body Material: Cast Iron |
Discharge NPT: 1-1/2" F | Height: 6" |
GPM of Water @ 5 Ft. of Head: 46 | HP: 1/3 |
Item: Submersible Sump Pump | Pump HP: 1/3 |
Voltage - Pumps: 120VAC | Gauge/Conductor: 18/3 |
Base Material: Polypropylene | Impeller Material - Pumps: Nylon |
Voltage: 115V | Manufacturers Warranty Length: 2 yr |
Motor Type: Split Phase | Max. Temp.: 140 Degrees F |
Impeller Material: Nylon | On Point: 7 in to 10 in |
Switch Actuation: Diaphragm | Body Material: Cast Iron |
Rated Voltage: 115V AC | Switch Electrical Connection: Integral |
RPM: 1,500 RPM | Body Dia.: 9 1/2 in |
Overall Height: 6 in | Flow Rate @ 15 Ft. of Head: 13.0 gpm |
Flow Rate @ 10 Ft. of Head: 29.0 gpm | Discharge Standard: NPT |
Flow Rate @ 5 Ft. of Head: 46.0 gpm | Discharge Gender: Female |
Duty Cycle: Continuous | Discharge Dia.: 1 1/2 in |
Discharge: 1-1/2 in FNPT | Country of Origin (subject to change): Mexico |
Description
Submersible Sump Pump, HP 1/3, Rated Voltage 115V AC, Hz 50/60 Hz, Amps 9 A, Switch Actuation Diaphragm, Switch Electrical Connection Integral, Off Point 1 in to 4 in, On Point 7 in to 10 in, Body Material Cast Iron, Impeller Material Nylon, Shaft Seal Material - Pumps Carbon, Ceramic, Flow Rate @ 5 Ft. of Head 46.0 gpm, Flow Rate @ 10 Ft. of Head 29.0 gpm, Flow Rate @ 15 Ft. of Head 13.0 gpm, Max. Head 18.0 ft, Body Dia. 9 1/2 in, Overall Height 6 in, Discharge 1-1/2 in FNPT
Restrictions and Compliance
WARNING: Cancer and Reproductive Harm For more information go to www.P65Warnings.ca.gov |