SAVE FOR MEMORIAL DAY Up to 20% OFFENTER CODE: HEROESMAY 22–24SEE DETAILS

Retain Ring, Ext, Dia 2 3/8 In, PK10

ROTOR CLIP| Zoro #: G0331755| Mfr #: SH-237ST ZD

$11.77 /pk

qty
Orders over $50.00 ship free. Details.Standard ground shipping.
Details:
Fits Groove Depth: 0.068"Fits Groove Width: 0.086"Prongs: -
Save 15%. Sign up for Z-mail.

Specifications

Zoro #: G0331755 Mfr #: SH-237ST ZD
Fits Groove Depth: 0.068"Fits Groove Width: 0.086"
Prongs: -Meets/Exceeds: ASME
Type: ExternalTensile Strength (PSI): 150,000
Fits Groove Dia.: 2.239"Finish: Yellow Zinc
For Shaft Dia.: 2-3/8"Item: Standard Retaining Ring
Rockwell Hardness: RC47-52Material: Carbon Steel
Height: -Radial Wall: -
Free I.D.: 2.197"Clearance Dia. (Released): 2.880"
Package Quantity: 10Thickness: 0.078"
Thickness Tolerance: +/-0.003"For Bore Dia.: -
Clearance Dia. (Compressed): -Groove Width Tolerance: +0.005"
Clearance Dia. (Expanded): 3.010"Hole Dia.: 0.125"
Clearance Dia. Free O.D.: -Groove Dia. Tolerance: +/-0.006"
Country of Origin (subject to change): United States

Description

Part# SH-237ST ZD, Carbon Steel, Zinc Dichromate Yellow, Manufactured by Rotor Clip, 2.375 In. Shaft Diameter, Basic External Ring, 2.197 In. Free Inside Diameter, 0.078 In. Thick, 0.125 In. Hole Diameter, 2.239 In. Groove Diameter, 0.086 In. Groove Width, 0.068 In. Groove Depth

  • Basic external retaining ring in carbon steel, zinc yellow plated. Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Axially assembled retaining rings are installed into machined grooves in housings/bores (internal) or on shafts (external). These rings are manufactured with lug holes—small holes in the lugs of both axial internal and external retaining rings—that are used to install/remove them, using pliers designed for this purpose.
  • External rings fit into the groove of a shaft. the portion of the ring that protrudes from the groove holds the assembly in place.
  • Axially assembled
  • ASME B18.27.1

Reviews