Skip to Main Content
customer-service Help
Tjernlund

Induced Draft Blower, 115, Aluminized Steel Housing and Blower Wheel

Tjernlund Induced Draft Blower,  115,  Aluminized Steel Housing and Blower Wheel HS3
Tap to zoom
Hover or click to zoom
Feedback Help us improve our product images
$743.59
  • Inlet and Outlet Dia. (In.): 8
  • Item: Induced Draft Blower
  • Type: High Temperature
See full product details
This item ships free.
Total: $743.59

Tjernlund #HS3 Specifications

  • Inlet and Outlet Dia. (In.): 8
  • Item: Induced Draft Blower
  • Type: High Temperature
  • Voltage: 115
  • Depth (In.): 12 in
  • Cut Out Required: -
  • Construction Material: Aluminized Steel Housing and Blower Wheel
  • Amps: 2.60
  • Includes: Adjustable Damper, Fan Proving Switch, UC1 Interlock Control, Vibration Isolators
  • Remarks: View Catalog Page for Selection Criteria
  • Height (In.): 12 1/2 in
  • Vent Pipe Dia. (In.): 8 or 10
  • Replaces: -
  • Agency Compliance: ETL Listed to UL378 and CAN3-B255-M81
  • Width (In.): 13 in
  • Application: Used for Side Wall Venting Commercial Natural Gas or LP Fired Equipment Including Boilers, Water Heaters and Unit Heaters.
  • Watts: 286 W
  • Heater Btu Input @ 270 (F): Not Applicable
  • SP @ 270 Deg. (F): Not Applicable
  • Max. Pipe Length 400: -
  • CFM @ 0.000-In. SP: 490 490 490 490
  • CFM @ 1.000-In. SP: 325 95 - -
  • BtuH Input: 500-650
  • Max. Pipe Length 500: -
  • Max. Pipe Length 300: -
  • CFM @ 530 Deg. (F): -
  • CFM @ 1.40-In. SP: 110 - - -
  • SP @ 530 Deg. (F): Not Applicable
  • CFM @ 270 Deg. (F): -
  • Heater Btu Input @ 390 (F): Not Applicable
  • CFM @ 390 Deg. (F): -
  • CFM @ 0.700-In. SP: 390 320 275 200
  • SP @ 390 Deg. (F): Not Applicable
  • CFM @ 0.500-In. SP: 430 385 365 350
  • Duct Temp. Deg. (F): 70,300,400,500
  • Heater Btu Input @ 530 (F): Not Applicable
  • Country of Origin (subject to change): United States
Feedback Help us improve our product information

Description

Induced Draft Blower, High Temperature, Vent Pipe Dia. (In.) 8 or 10, Inlet and Outlet Dia. (In.) 8, Voltage 115, 2.60 Amps, 286 W Watts, Height (In.) 12 1/2 in, Width (In.) 13 in, Depth (In.) 12 in, - Cut Out Required, Used for Side Wall Venting Commercial Natural Gas or LP Fired Equipment Including Boilers, Water Heaters and Unit Heaters., Construction Material Aluminized Steel Housing and Blower Wheel, Agency Compliance ETL Listed to UL378 and CAN3-B255-M81, Replaces -

Reviews of Tjernlund #HS3