Skip to Main Content
customer-service Help

Induced Draft Blower, 115V, Sintered Iron, 9 1/4 in H.

  • Zoro #: G0975317
  • Mfr #: HS2
Tjernlund Induced Draft Blower,  115V,  Sintered Iron,  9 1/4 in H. HS2
Tap to zoom
Hover or click to zoom
Feedback Help us improve our product images
$437.29
  • Inlet and Outlet Dia. (In.): 6"
  • Item: Induced Draft Blower
  • Type: High Temperature
See full product details
This item ships free.

Tjernlund #HS2 Specifications

  • Zoro #: G0975317
  • Mfr #: HS2
  • Inlet and Outlet Dia. (In.): 6"
  • Item: Induced Draft Blower
  • Type: High Temperature
  • Voltage: 115V
  • Depth (In.): 8 1/2 in
  • Cut Out Required: -
  • Construction Material: Sintered Iron
  • Amps: 1.51A
  • Includes: Adjustable Damper, Fan Proving Switch, UC1 Interlock Control, Vibration Isolators
  • Remarks: View Catalog Page for Selection Criteria
  • Height (In.): 9 1/4 in
  • Vent Pipe Dia. (In.): 6" or 8"
  • Replaces: -
  • Agency Compliance: ETL Listed to UL378 and CAN3-B255-M81
  • Width (In.): 11 1/2 in
  • Application: Used for Side Wall Venting Commercial Natural Gas or LP Fired Equipment Including Boilers, Water Heaters and Unit Heaters
  • Watts: 224 W
  • RPM: 3300
  • Bearings: Sleeve
  • Enclosure: Open
  • Class: 1
  • Overload Protection: Thermal
  • SP @ 530 Deg. (F): Not Applicable
  • Duct Temp. Deg. (F): 70,300,400,500
  • Max. Pipe Length 500: -
  • CFM @ 270 Deg. (F): -
  • CFM @ 530 Deg. (F): -
  • Max. Pipe Length 400: -
  • CFM @ 0.700-In. SP: 220 190 185 165
  • Heater Btu Input @ 390 (F): Not Applicable
  • Max. Pipe Length 300: -
  • BtuH Input: 300-450
  • Heater Btu Input @ 530 (F): Not Applicable
  • CFM @ 390 Deg. (F): -
  • CFM @ 0.000-In. SP: 280 280 280 280
  • SP @ 390 Deg. (F): Not Applicable
  • Heater Btu Input @ 270 (F): Not Applicable
  • CFM @ 1.40-In. SP: 150 - - -
  • CFM @ 0.500-In. SP: 235 220 215 200
  • SP @ 270 Deg. (F): Not Applicable
  • CFM @ 1.000-In. SP: 200 150 120 -
  • Motor Type: Permanent Split Capacitor
  • Country of Origin (subject to change): United States
Feedback Help us improve our product information

Description

Induced Draft Blower, High Temperature, Vent Pipe Dia. (In.) 6 or 8, Inlet and Outlet Dia. (In.) 6, Voltage 115, 1.51 Amps, 224 W Watts, Height (In.) 9 1/4 in, Width (In.) 11 1/2 in, Depth (In.) 8 1/2 in, - Cut Out Required, Used for Side Wall Venting Commercial Natural Gas or LP Fired Equipment Including Boilers, Water Heaters and Unit Heaters., Construction Material Aluminized Steel Housing and Blower Wheel, Agency Compliance ETL Listed to UL378 and CAN3-B255-M81, Replaces -

Reviews of Tjernlund #HS2