2,000+ Results for FREUD - Page 11
Key Features:
- Milling Diameter: 1-1/4"
- Shank Dia.: 1/2"
- Overall Length: 2-13/16"
Key Features:
- Shank Dia.: 1/2"
- Application: Trimming laminates and routing along patterns
- Overall Length (In.): 3-5/8"
Key Features:
- Item: High Speed Steel Industrial Planer and J
- Width (In.): 2 in
- Overall Length: 37 in
Key Features:
- Item: Solid Surface Blade,10"
- Kerf: .126"
- Package Quantity: 0
Key Features:
- Item: Carbide Tipped Blade for Ripping and Cro
- Kerf: 3mm
- Application: Sawblades to cut solid wood. Thin kerf
Key Features:
- Item: Forstner Bit Set to 2-1/8" dia.,16 pcs.
- For Use With: Drilling flat bottom holes, pocket holes, or overlapping holes.
- Application: Drills plywoods, hardwoods, and softwoods.
Key Features:
- Milling Diameter: 1-29/64"
- Shank Dia.: 1/2"
- Item: Radius Half Round Bit,3/8"
Key Features:
- Shape: Rabbeting
- Measurement System: Fractional Inch
- Material - Machining: Carbide
Key Features:
- Shape: Straight
- Measurement System: Fractional Inch
- Material - Machining: Carbide
Key Features:
- Item: Brad Point Bit,5mm dia.
- Application: Drills all composition materials, solid surface materials, plywoods, hardwoods, and softwoods on automatic or manual multi-spindle boring machines.
- For Use With: Freud's Industrial Carbide Tipped Brad Point Boring Bits are designed for multiple spindle machines.
Key Features:
- Item: Brad Point Bit,8mm dia.
- Application: Drills all composition materials, solid surface materials, plywoods, hardwoods, and softwoods on automatic or manual multi-spindle boring machines.
- For Use With: Freud's Industrial Carbide Tipped Brad Point Boring Bits are designed for multiple spindle machines.
Key Features:
- Shank Dia.: 1/4"
- Cutting Dia. (In.): 19/32"
- Item: Bevel Trim Bit,19/32" dia.
Key Features:
- Item: Thin Kerf Combination Blade,8"
- Hook Angle: 10 Degrees
- For Use With: Crosscuts (3/4" to 3-1/2") & Rips (3/8" to 1-1/2").
Key Features:
- Item: Thin Kerf Ultimate Plywood and Melamine
- Package Quantity: 0
- For Use With: Flawless Finish In Veneered Plywood, Chip Board, Melamine & Laminates For Virtually Chip-Free Cuts. Depth of cut (1/4" min to 1-5/8" max)
Key Features:
- Milling Diameter: 1-1/2"
- Shank Dia.: 1/2"
- Item: Radius Round Nose Bit,3/4"
Key Features:
- Shank Dia.: 1/2"
- Item: Ogee Bit,1-1/2" dia.
- Overall Length (In.): 2-1/2"
Key Features:
- Shank Dia.: 1/2"
- Overall Length (In.): 2-1/8"
- Application: Ultra-clean hinge mortises, or perfect grooves and dadoes
Key Features:
- Item: Ultimate Cut-Off Blade,9"
- Hook Angle: 10 Degrees
- Application: Crosscutting
Key Features:
- Item: Thin Kerf Ultimate Plywood and Melamine
- Hook Angle: 2 Degrees
- Application: Plywood & Melamine
Key Features:
- Shank Dia.: 1/2"
- Cutting Dia. (In.): 1/2"
- Application: Trimming laminates and routing along patterns
Key Features:
- Item: Ball Bearing,7/8" dia.
- Outside Dia.: 7/8"
- Max. RPM: 24000
Key Features:
- Item: Forstner Bit,1" dia.
- For Use With: Drilling flat bottom holes, pocket holes, or overlapping holes.
- Application: Drills plywoods, hardwoods, and softwoods.
Key Features:
- Shank Dia.: 1/2"
- Item: Base and Cap Bit,1-3/4" dia.
- Application: Mill traditional baseboards in any width
Key Features:
- Shank Dia.: 1/2"
- Application: Routing a finger pull edge on cabinet doors
- Cutting Dia. (In.): 1-3/4"
Key Features:
- Shank Dia.: 1/4"
- Item: Single Flute Straight Bit,1/8" dia.
- Application: Fast stock removal at high feed rates
Key Features:
- Item: Precision Shim Sets
- For Use With: Replacement Parts For Shim sets
- Package Quantity: 0
Key Features:
- Milling Diameter: 1/8"
- Shank Dia.: 1/4"
- Item: Radius Round Nose Bit,1/16"
Key Features:
- Shank Dia.: 1/4"
- Cutting Dia. (In.): 1/4"
- Application: Smooth routing in hardwood, softwood, plywood and composites
Key Features:
- Shank Dia.: 1/2"
- Item: Single Flute Straight Bit,1/2" dia.
- Cutting Dia. (In.): 1/2"
Key Features:
- Shank Dia.: 1/2"
- Item: Rabbeting Bit,1-3/8" dia.
- Application: Cabinetmaking and joinery
Key Features:
- Item: V Grooving Bit,90deg,1/2" dia.
- Height: 7/16"
- For Use With: Engraving, signmaking and veining
Key Features:
- Item: Forstner Bit,1-1/4" dia.
- For Use With: Drilling flat bottom holes, pocket holes, or overlapping holes.
- Application: Drills plywoods, hardwoods, and softwoods.