2,000+ Results for FREUD - Page 20
Key Features:
- Item: Advanced 2+2 Cutter Design for 5/8" Stoc
- Number of Pieces: 0
- Diameter: 5-1/2"
Key Features:
- Item: Performance System Panel Raising System,
- For Use With: To create over 10 different styles of raised panels for cabinet doors
- Outside Diameter: 5-1/2"
Key Features:
- Item: Butterfly Spline Bit,1-1/8" dia.
- Tool Length (In.): 3-1/4"
- Height: 1-3/4"
Key Features:
- Item: Thin Kerf Gang Rip Blade,250mm
- Package Quantity: 0
- Hook Angle: 20 Degrees
Key Features:
- Item: Conical Scoring,160mm
- Package Quantity: 0
- Kerf: 3.1-4.3mm
Key Features:
- Shank Dia.: 1/2"
- Cutting Dia. (In.): 10mm
- Overall Length (In.): 2-3/4"
Key Features:
- Item: Conical Scoring,200mm
- For Use With: Scoring sawblades for cutting coated panels, on sizing machines.
- Hook Angle: 8 Degrees
Key Features:
- Item: Carbide Tipped Blade for Ripping and Cro
- Package Quantity: 0
- Hook Angle: 15 Degrees
Key Features:
- Item: Forstner Bit,1-5/8" dia.
- Application: Drills plywoods, hardwoods, and softwoods.
- For Use With: Drilling flat bottom holes, pocket holes, or overlapping holes.
Key Features:
- Application: Sawblades to cut ferrous metals and soft steel.
- Item: Ferrous Metals Sawblade,230mm
- For Use With: To cut drawn products and tubes with a thickness up to 4 mm, dry cut (without lubricants).
Key Features:
- Item: Performance System Raised Panel Profile
- For Use With: Specially designed knife removes all splinters on cross grain cuts.
- Application: Specially designed profile knife removes all splinters on cross grain cuts.
Key Features:
- Item: Panel Sizing blade for Horizontal Beam S
- Kerf: 6.2mm
- Hook Angle: 18 Degrees
Key Features:
- Item: Ultra-Thin Aluminum and Non-Ferrouslades
- Kerf: 3mm
- Hook Angle: 5 Degrees
Key Features:
- Item: Shim Sets,1-5/16" dia.
- For Use With: To adjust a cut for a precise fit.
- Application: Shim Sets
Key Features:
- Shank Dia.: 1/4"
- Application: Decorative detail for cabinets, molding and furniture
- Overall Length (In.): 2-5/16"
Key Features:
- Item: Medium to Thick Aluminum and Non-Ferrous
- Application: Sawblades to cut aluminum and non-ferrous metals
- Package Quantity: 0
Key Features:
- Milling Diameter: 1-1/4"
- Shank Dia.: 1/2"
- Item: Radius Cove and Bead Groove Bit,5/32"
Key Features:
- Item: Glue Line Rip,300mm
- Kerf: 2.8mm
- Package Quantity: 0
Key Features:
- Shank Dia.: 1/4"
- Overall Length (In.): 2-1/2"
- Cutting Dia. (In.): 1/8"
Key Features:
- Item: Bevelled Tooth Scoring,100mm
- Package Quantity: 0
- Hook Angle: 10 Degrees
Key Features:
- Shank Dia.: 1/2"
- Application: Milling elaborate crown moldings
- Item: Crown Molding Bit,1-1/4" dia.
Key Features:
- Cutter Dia.: 2"
- Item: Depth Slotting Cutter Set,9/16"
- Overall Length: 2-3/8"
Key Features:
- Item: Carbide Tipped Blade to Cut Solid Wood,
- Application: Sawblades to cut solid wood.
- Hook Angle: 20 Degrees
Key Features:
- Item: Panel Sizing for Sliding Table Saws,220
- Kerf: 3.2mm
- Package Quantity: 0
Key Features:
- Item: Panel Sizing Blade for Particle Board,3
- For Use With: Panel ripping in particle board
- Application: Sawblades forsizing particle board panels on table saws.
Key Features:
- Item: Carbide Tipped Blade for Ripping and Cro
- Kerf: 5.4mm
- Application: Sawblades for cutting wooden panels and composites.
Key Features:
- Milling Diameter: 1-1/4"
- Shank Dia.: 1/4"
- Overall Length: 2-3/16"
Key Features:
- Cutter Dia.: 2"
- Item: Slot Four Wing Slotting Cutter,3/16"
- Application: Ultra-clean slots and grooves for T-moldings, spline joints, tongue & groove joints & more
Key Features:
- Shank Dia.: 1/4"
- Overall Length (In.): 2-1/2"
- For Use With: Wood, Wood Composites, Plastics (Hard & Soft), and Aluminum for 2D and 3D Carving
Key Features:
- Shank Dia.: 1/4"
- Item: Top Bearing Classical Cove and Bead Grv
- Application: Template work, decorative edges and elaborate grooves
Key Features:
- Shank Dia.: 1/4"
- Item: Double Flute Straight Bit,5 dia.
- Application: Smooth routing in hardwood, softwood, plywood and composites
Key Features:
- Item: Thin to Medium Aluminum and Non Ferrousl
- Package Quantity: 0
- Application: Sawblades to cut aluminum and non-ferrous metals
Key Features:
- Item: Medium Aluminum and Non-Ferrouslades,25
- Hook Angle: -6 Degrees
- For Use With: To cut drawn products and tubes whose thickness exceeds 5 mm. It is recommendable to use it with the sawblade over the workpiece to be cut.
Key Features:
- Shank Dia.: 1/4"
- Cutting Dia. (In.): 1/2"
- Application: Smooth routing in hardwood, softwood, plywood and composites
Key Features:
- Milling Diameter: 1-3/4"
- Shank Dia.: 1/2"
- Overall Length: 2-7/8"
Key Features:
- Item: Performance System Profile Knives for 32
- For Use With: Use with the DE320-U insert cutter head.
- Application: Bottom Profile Cutter Knives