2,000+ Results for FREUD - Page 7
Key Features:
- Item: Thin Kerf Combination Blade,12"
- Hook Angle: 10 Degrees
- Package Quantity: 0
Key Features:
- Shank Dia.: 1/2"
- Cutting Dia. (In.): 2-11/64"
- Item: Lock Miter Bit,2-11/64" dia.
Key Features:
- Item: Conical Scoring,200mm
- For Use With: Scoring sawblades for cutting coated panels, on sizing machines.
- Kerf: 4.7-5.9mm
Key Features:
- Shank Dia.: 1/2"
- Overall Length (In.): 2-1/2"
- Application: Routing Panels for doors, drawer fronts, paneling and many other decorative tasks
Key Features:
- Milling Diameter: 1-1/8"
- Shank Dia.: 1/2"
- Overall Length: 2-23/32"
Key Features:
- Shank Dia.: 1/4"
- Application: Template work and lettering
- Overall Length (In.): 2-5/16"
Key Features:
- Item: Carbide Tipped Blade to Cut Solid Wood,
- Application: Sawblades to cut solid wood.
- For Use With: Sawblades suitable for ripping.
Key Features:
- Item: Conical Scoring,180mm
- For Use With: Scoring sawblades for cutting coated panels, on sizing machines.
- Hook Angle: 8 Degrees
Key Features:
- Item: Thin to Medium Aluminum and Non Ferrousl
- For Use With: To cut drawn products and tubes with a thickness included between 2 and 5 mm, as well as polymeric panels up to 20 mm.
- Kerf: 3.5mm
Key Features:
- Item: Backcutter for 2+2 Advnc Cutter Design f
- For Use With: Ideal for a decorative profile on the back side
- Number of Pieces: 0
Key Features:
- Item: Thin Kerf Carbide Tipped Blade to Cut So
- Package Quantity: 0
- Application: Sawblades to cut solid wood. Thin kerf
Key Features:
- Item: Panel Sizing for Sliding Table Saws,250
- Application: Sawblades for cutting wood panels, plastic materials and non-ferrous metals on table saw or miter saw.
- Package Quantity: 0
Key Features:
- Item: Carbide Tipped Blade to Cut Solid Wood,
- Kerf: 4mm
- For Use With: Sawblades suitable for ripping.
Key Features:
- Shank Dia.: 1/4"
- Overall Length (In.): 2"
- Item: Up Spiral Bit,3/16" dia.
Key Features:
- Item: Ball Bearing,1/2" dia.
- Outside Dia.: 1/2"
- Max. RPM: 24000
Key Features:
- Item: Thin Kerf Fine Finish Crosscut Blade,12
- Kerf: .094"
- Package Quantity: 0
Key Features:
- Item: Ultimate Cut-Off Blade,14"
- For Use With: Ultimate crosscutting blades for glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required. Depth of cut (1/4" min to 1-5/8" max)
- Kerf: .136"
Key Features:
- Item: Forstner Bit,35mm dia.
- Application: Drills plywoods, hardwoods, and softwoods.
- For Use With: Drilling flat bottom holes, pocket holes, or overlapping holes.
Key Features:
- Item: Ball Bearing,3/4" dia.
- Outside Dia.: 3/4"
- Max. RPM: 24000
Key Features:
- Cutter Dia.: 2"
- Item: Depth Slotting Cutter Set,9/16"
- Overall Length: 2-3/8"
Key Features:
- Item: Medium Stock Aluminum Blade,12"
- Kerf: .110"
- Package Quantity: 0
Key Features:
- Shank Dia.: 1/4"
- Application: Use for grooving or edge work. Ideal for Wood, Wood Composites, Plastics (Hard & Soft), and Aluminum for 2D and 3D Carving.
- Item: Up Cut Spiral Ball Nose,1/8"x1/2"
Key Features:
- Shape: Cove
- Measurement System: Fractional Inch
- Material - Machining: Carbide
Key Features:
- Shape: Roundover
- Measurement System: Fractional Inch
- Material - Machining: Carbide
Key Features:
- Shape: Chamfer
- Measurement System: Fractional Inch
- Material - Machining: Carbide
Key Features:
- Shape: Hinge Mortise
- Measurement System: Fractional Inch
- Material - Machining: Carbide
Key Features:
- Item: General Purpose Blade,14"
- Application: General Purpose
- Package Quantity: 0
Key Features:
- Item: Super Dado Sets,12"
- For Use With: For cutting slots, grooves, dadoes, and rabbets in softwood or hardwood
- Application: To create clean edges, square shoulders, make flat bottom grooves and virtually splinter-free cuts
Key Features:
- Item: General Purpose Blade,20"
- Kerf: .165"
- Package Quantity: 0
Key Features:
- Item: Medium to Thick Aluminum and Non-Ferrous
- Kerf: 44
- Hook Angle: -6 Degrees
Key Features:
- Item: Carbide Tipped Blade to Cut Solid Wood,
- Package Quantity: 0
- Kerf: 3.5mm
Key Features:
- Shank Dia.: 1/4"
- Application: Smooth routing in hardwood, softwood, plywood and composites
- Cutting Dia. (In.): 15/32"
Key Features:
- Item: Carbide Tipped Blade for Crosscutting,3
- Hook Angle: 5 Degrees
- Application: Sawblades for cutting wooden panels and composites.
Key Features:
- Application: Sawblades to cut ferrous metals and soft steel.
- Item: Ferrous Metals Sawblade,355mm
- For Use With: To cut drawn products and tubes with a thickness up to 4 mm, dry cut (without lubricants).