2,000+ Results for FREUD - Page 9
Key Features:
- Shank Dia.: 1/2"
- Item: Base and Cap Bit,1-11/16" dia.
- Cutting Dia. (In.): 1-11/16"
Key Features:
- Shank Dia.: 1/2"
- Cutting Dia. (In.): 15/16"
- Item: Triple Beading Bit,15/16" dia.
Key Features:
- Item: Carbide Tipped Blade for Crosscutting,3
- Hook Angle: 5 Degrees
- Application: Sawblades for cutting wooden panels and composites.
Key Features:
- Shank Dia.: 1/2"
- Overall Length (In.): 2-13/16"
- Item: Top Bearing Flush Trim Bit,7/8" dia.
Key Features:
- Shank Dia.: 1/4"
- Item: Triple Beading Bit,15/16" dia.
- Overall Length (In.): 2-5/8"
Key Features:
- Item: Thin Kerf Fine Finish Crosscut Blade,9"
- Hook Angle: 15 Degrees
- Package Quantity: 0
Key Features:
- Shape: Rabbeting
- Measurement System: Fractional Inch
- Material - Machining: Carbide
Key Features:
- Item: Box Joint Cutter Set,8"
- Package Quantity: 0
- Kerf: 0
Key Features:
- Item: Heavy Duty Multi-Purpose Blade,16"
- Package Quantity: 0
- Kerf: .177"
Key Features:
- Shank Dia.: 1/4"
- Overall Length (In.): 2"
- Item: Up Spiral Bit,3/16" dia.
Key Features:
- Milling Diameter: 1-29/64"
- Shank Dia.: 1/2"
- Item: Radius Half Round Bit,3/8"
Key Features:
- Shank Dia.: 1/4"
- Overall Length (In.): 2"
- Cutting Dia. (In.): 1/8"
Key Features:
- Item: Panel Sizing for Sliding Table Saws,220
- Package Quantity: 0
- Kerf: 3.2mm
Key Features:
- Item: Forstner Bit Set to 2-1/8" dia.,16 pcs.
- For Use With: Drilling flat bottom holes, pocket holes, or overlapping holes.
- Application: Drills plywoods, hardwoods, and softwoods.
Key Features:
- Shank Dia.: 1/2"
- Application: Smooth routing in hardwood, softwood, plywood and composites
- Cutting Dia. (In.): 3/4"
Key Features:
- Item: High Speed Steel Industrial Planer and J
- Application: Replacement knives
- For Use With: The C610 knives are designed for the C610 Makita 2030N machine
Key Features:
- For Use With: Joints for raised panels, drawer fronts, table tops or any glue-up applications
- Shank Dia.: 1/2"
- Item: Reversible Glue Joint Bit,1-1/2" dia.
Key Features:
- Milling Diameter: 7/8"
- Shank Dia.: 1/2"
- Overall Length: 2-1/2"
Key Features:
- Item: Brad Point Bit,7mm dia.
- For Use With: Freud's Industrial Carbide Tipped Brad Point Boring Bits are designed for multiple spindle machines.
- Application: Drills all composition materials, solid surface materials, plywoods, hardwoods, and softwoods on automatic or manual multi-spindle boring machines.
Key Features:
- Shank Dia.: 1/4"
- Cutting Dia. (In.): 1/4"
- Overall Length (In.): 2"
Key Features:
- Item: Ball Bearing,7/8" dia.
- Outside Dia.: 7/8"
- Max. RPM: 24000
Key Features:
- Item: Heavy Duty Multi-Purpose Blade,12"
- Kerf: .126"
- For Use With: Stacked Chipboard And Manmade Materials. Crosscuts (1/2" to 2-3/4") & Rips (3/4" to 3/8" ).
Key Features:
- Item: Medium to Thick Aluminum and Non-Ferrous
- Kerf: 3.5
- Application: Sawblades to cut aluminum and non-ferrous metals
Key Features:
- For Use With: To cut drawn products and tubes with a thickness up to 4 mm, dry cut (without lubricants).
- Application: Sawblades to cut ferrous metals and soft steel.
- Item: Ferrous Metals Sawblade,254mm
Key Features:
- Shank Dia.: 1/2"
- Item: Flush Trim "V" Groove Bit,5/8" dia.
- Cutting Dia. (In.): 5/8"
Key Features:
- Item: Safety Dado Sets,6"
- Application: To create clean edges, square shoulders, make flat bottom grooves and virtually splinter-free cuts
- Package Quantity: 0
Key Features:
- Shank Dia.: 1/4"
- Overall Length (In.): 2-1/2"
- Cutting Dia. (In.): 1/4"
Key Features:
- Item: Thin to Medium Aluminum and Non Ferrousl
- For Use With: To cut drawn products and tubes with a thickness included between 2 and 5 mm, as well as polymeric panels up to 20 mm.
- Application: Sawblades to cut aluminum and non-ferrous metals
Key Features:
- Item: V Grooving Bit,90deg,1/2" dia.
- Height: 7/16"
- For Use With: Engraving, signmaking and veining
Key Features:
- Shank Dia.: 1/2"
- Cutting Dia. (In.): 13/16"
- Overall Length (In.): 3"
Key Features:
- Shape: Chamfer
- Measurement System: Fractional Inch
- Material - Machining: Carbide
Key Features:
- Shank Dia.: 1/2"
- Item: Double Flute Straight Bit (Eclipse Grind
- Application: Smooth routing in hardwood, softwood, plywood and composites
Key Features:
- Item: Brad Point Bit,10mm dia.
- Application: Drills all composition materials, solid surface materials, plywoods, hardwoods, and softwoods on automatic or manual multi-spindle boring machines.
- For Use With: Freud's Industrial Carbide Tipped Brad Point Boring Bits are designed for multiple spindle machines.
Key Features:
- Item: Thin Kerf Ultimate Cut-Off Blade,10"
- For Use With: Ultimate Cut-Off Blades For Glass-Smooth Finishes With Underpowered Saws. Depth of cut (1/4" min to 1-5/8" max)
- Kerf: .091"
Key Features:
- Shank Dia.: 1/2"
- Item: Ogee Bit,1-1/2" dia.
- Overall Length (In.): 2-1/2"