26,500+ Results for HARVEY TOOL - Page 203
Results
Key Features:
- Finish: C3
- Point Angle: 140
- Shank Dia.: 3.000 mm
Key Features:
- Number of Flutes: 3
- Length of Cut: 0.2790"
- Shank Dia.: 0.1250" (1/8)
Key Features:
- Number of Flutes: 2
- Length of Cut: 0.2790"
- Shank Dia.: 0.1250" (1/8)
Key Features:
- Material - Machining: Carbide
- Finish - Machining: Uncoated
- Single End/Double End: Double Ended
Key Features:
- Drill Bit Finish: C3
- Shank Size: 0.3125" (5/16)
- Overall Length: 3.0000" (3)
Key Features:
- Material - Machining: Carbide
- Finish - Machining: Uncoated
- Measurement System: Inch
Key Features:
- Finish - Machining: UN
- Number of Flutes: 2
- Included Angle: 90
Key Features:
- Material - Machining: Carbide
- Cutter Dia.: 0.1562" (5/32)
- Overall Length: 2.0000" (2)
Key Features:
- Material - Machining: Carbide
- Finish - Machining: AlTiN Nano
- Measurement System: Inch
Key Features:
- Finish - Machining: UN
- Number of Flutes: 3
- Included Angle: 30
Key Features:
- Measurement System: Inch
- Overall Length: 1.5000" (1-1/2)
- Finish: UN
Key Features:
- Material - Machining: Carbide
- Cutter Dia.: 0.2500" (1/4)
- Overall Length: 2.5000" (2-1/2)
Key Features:
- Finish - Machining: UN
- Number of Flutes: 3
- Included Angle: 30
Key Features:
- Material - Machining: Carbide
- Finish - Machining: Uncoated
- Measurement System: Inch
Key Features:
- Single End/Double End: Double Ended
- Material - Machining: Carbide
- Finish - Machining: AlTiN
Key Features:
- Finish - Machining: C3
- Number of Flutes: 3
- Included Angle: 120
Key Features:
- Material - Machining: Carbide
- Finish - Machining: AlTiN
- Measurement System: Inch
Key Features:
- Material - Machining: Carbide
- Finish - Machining: AlTiN
- Measurement System: Inch
Key Features:
- Number of Flutes: 5
- Length of Cut: 0.3120" (5/16)
- Shank Dia.: 0.1250" (1/8)
Key Features:
- Overall Length: 1.5000" (1-1/2)
- Included Angle: 30
- Neck Dia.: 0.0200" (.5 mm)
Key Features:
- Material - Machining: Carbide
- Finish - Machining: AlTiN
- Measurement System: Inch
Key Features:
- Material - Machining: Carbide
- Cutter Dia.: 0.1250" (1/8)
- Overall Length: 1.5000" (1-1/2)
Key Features:
- Material - Machining: Carbide
- Finish - Machining: Uncoated
- Single End/Double End: Single Ended
Key Features:
- Material - Machining: Carbide
- Measurement System: Inch
- Taper Angle Per Side: 5
Key Features:
- Material - Machining: Carbide
- Measurement System: Inch
- Taper Angle Per Side: 5
Key Features:
- Material - Machining: Carbide
- Measurement System: Inch
- Taper Angle Per Side: 3
Key Features:
- Number of Flutes: 5
- Length of Cut: 0.1800"
- Shank Dia.: 0.1250" (1/8)
Key Features:
- Number of Flutes: 5
- Length of Cut: 0.3750" (3/8)
- Shank Dia.: 0.1250" (1/8)
Key Features:
- Material - Machining: Carbide
- Cutter Dia.: 0.2500" (1/4)
- Overall Length: 2.5000" (2-1/2)
Key Features:
- Number of Flutes: 5
- Length of Cut: 0.3000"
- Shank Dia.: 0.1250" (1/8)
Key Features:
- Material - Machining: Carbide
- Finish - Machining: AlTiN
- Measurement System: Inch
Key Features:
- Material - Machining: Carbide
- Finish - Machining: Uncoated
- Single End/Double End: Double Ended
Key Features:
- Material - Machining: Carbide
- Finish - Machining: Uncoated
- Measurement System: Inch
Key Features:
- Number of Flutes: 5
- Length of Cut: 0.2500" (1/4)
- Shank Dia.: 0.1250" (1/8)
Key Features:
- Number of Flutes: 5
- Length of Cut: 2.400 mm
- Shank Dia.: 4.000 mm
Key Features:
- Material - Machining: Carbide
- Cutter Dia.: 0.2500" (1/4)
- Overall Length: 2.5000" (2-1/2)