26,500+ Results for HARVEY TOOL - Page 9
Key Features:
- Material - Machining: Carbide
- Finish - Machining: AlTiN
- Overall Length: 2.5000" (2-1/2)
Key Features:
- Drill Bit Finish: C3
- Shank Size: 0.2500" (1/4)
- Overall Length: 3.2500" (3-1/4)
Key Features:
- Material - Machining: Carbide
- Finish - Machining: Uncoated
- Measurement System: Inch
Key Features:
- Measurement System: Inch
- Overall Length: 2.5000" (2-1/2)
- Finish: C3
Key Features:
- Number of Flutes: 4
- Shank Dia.: 1/8"
- Overall Length: 1.5000" (1-1/2)
Key Features:
- Material - Machining: Carbide
- Finish - Machining: AlTiN
- Overall Length: 2.0000" (2)
Key Features:
- Material - Machining: Carbide
- Cutter Dia.: 0.7500" (3/4)
- Overall Length: 3.2500" (3-1/4)
Key Features:
- Number of Flutes: 4
- Shank Dia.: 1/2"
- Length of Cut: 1.0000" (1)
Key Features:
- Material - Machining: Carbide
- Finish - Machining: Uncoated
- Overall Length: 3.0000" (3)
Key Features:
- Material - Machining: Carbide
- Finish - Machining: AlTiN
- Measurement System: Inch
Key Features:
- Number of Flutes: 3
- Length of Cut: 0.2500" (1/4)
- Shank Dia.: 0.2500" (1/4)
Key Features:
- Number of Flutes: 4
- Overall Length: 3.0000" (3)
- Material - Machining: Carbide
Key Features:
- Overall Length: 38.000 mm
- Shank Dia.: 3.000 mm
- Cutter Dia.: 1.900 mm
Key Features:
- Material - Machining: Carbide
- Finish - Machining: Uncoated
- Overall Length: 2.5000" (2-1/2)
Key Features:
- Length of Cut: 0.6250" (5/8)
- Shank Dia.: 0.1250" (1/8)
- Overall Length: 1.5000" (1-1/2)
Key Features:
- Material - Machining: Carbide
- Finish - Machining: Uncoated
- Single End/Double End: Double Ended
Key Features:
- Material - Machining: Carbide
- Finish - Machining: AlTiN
- Single End/Double End: Double Ended
Key Features:
- Finish: UN
- Shank Dia.: 0.1250" (1/8)
- Overall Length: 1.5000" (1-1/2)
Key Features:
- Material - Machining: Carbide
- Finish - Machining: Uncoated
- Measurement System: Inch
Key Features:
- Material - Machining: Carbide
- Measurement System: Inch
- Taper Angle Per Side: 0.5
Key Features:
- Material - Machining: Carbide
- Finish - Machining: AlTiN
- Overall Length: 2.0000" (2)
Key Features:
- Drill Bit Finish: C3
- Shank Size: 0.5000" (1/2)
- Overall Length: 3.0000" (3)
Key Features:
- Number of Flutes: 4
- Shank Dia.: 1/8"
- Length of Cut: 0.1870" (3/16)
Key Features:
- Number of Flutes: 4
- Shank Dia.: 1/8"
- Finish - Machining: Uncoated
Key Features:
- Drill Bit Finish: C3
- Shank Size: 0.5000" (1/2)
- Overall Length: 3.6440"
Key Features:
- Number of Flutes: 4
- Shank Dia.: 5/16"
- Length of Cut: 0.5630"
Key Features:
- Number of Flutes: 4
- Shank Dia.: 1/4"
- Milling Dia.: 1/4"
Key Features:
- Material - Machining: Carbide
- Measurement System: Inch
- Finish - Machining: Uncoated
Key Features:
- Overall Length: 3.0000" (3)
- Included Angle: 90
- Neck Dia.: 0.2790"
Key Features:
- Material - Machining: Carbide
- Finish - Machining: AlTiN
- Measurement System: Inch
Key Features:
- Drill Bit Finish: UN
- Shank Size: 0.3750" (3/8)
- Overall Length: 2.2260"
Key Features:
- Included Angle: 30
- Number of Flutes: 2
- Measurement System: Inch
Key Features:
- Material - Machining: Carbide
- Cutter Dia.: 0.2500" (1/4)
- Overall Length: 2.5000" (2-1/2)
Key Features:
- Finish - Machining: UN
- Number of Flutes: 2
- Included Angle: 30
Key Features:
- Material - Machining: Carbide
- Finish - Machining: Uncoated
- Single End/Double End: Double Ended
Key Features:
- Material - Machining: Carbide
- Finish - Machining: AlTiN
- Overall Length: 2.0000" (2)