4,500+ Results for INGERSOLL-RAND - Page 14
Key Features:
- Item: Air Hammer
- Item - Air Hammers: Air Chipping Hammer
- Blows per Minute: 2,300 bpm
Key Features:
- Item: Chain Container
- Material: Fabric
- Height: 6 in
Key Features:
- Item: Air Impact Wrench 1" 2000ft-lb,2155QIMAX
Key Features:
- Air Inlet: 1/4 in NPT Female
- Blows per Minute: 1220
- Duty: General
Key Features:
- Item - Air Filters: General Purpose Filter
- Filter Rating - Air Treatment: 0.01 micron
- Connection Size - Air Treatment: 3/4 in NPT
Key Features:
- Item: V Belt
- Industry Number: 2475
- Outside Length: 74 in
Key Features:
- Item: Straight Air Die Grinder,0.5 HP
- Overall Length: 5 7/8 in
- Air Inlet: 1/4 in
Key Features:
- Item: Valve Cap
- For Use With Mfr. Model Number: 121-K6, 121/Q, 772
- Fits Brand: Ingersoll Rand
Key Features:
- Item: Impact Wrench Body
- For Use With: 1702, 211, 212, 215G, 231
Key Features:
- Item: Quick Change Hammer Retainer
Key Features:
- Item - Air Screwdrivers: Air Screwdriver
- Body Style - Air Tools: In-Line
- Torque Range Soft Draw: 13 to 35 in-lb
Key Features:
- CFM: 3
- Dew Point (Deg. F): -40
- For Air Comp. HP: 1.5 hp
Key Features:
- Item: Tune Up Kit
- For Use With: 285B, 285B-6, 285B-S6
- Includes: Ball, Bearings, Gasket, O-Ring, Rear Rotor Bearing, Seals, Spring Pin, Springs, Stop Pin, Throttle Valve, Throttle Valve Spring, Vane Pack
Key Features:
- Tank Size: 120 gal.
- Phase: Three
- HP: 10
Key Features:
- Item: 20V Angle Grinder
- Switch Type: Paddle
- Voltage: 20V DC
Key Features:
- Item: Dead Handle (Angled) With Screw
- For Use With: Mfr. No. 285B
Key Features:
- For Use With Mfr. Model Number: 107XPA
- Fits Brand: Ingersoll Rand
- For Use With: 107XPA
Key Features:
- Item: Hammer Case Gasket
- For Use With: Mfr. No. 285B
Key Features:
- Item: Wrench,Collet Body/Collet Nut
- Fits Brand: Ingersoll Rand
- Series: Not Applicable
Key Features:
- Item: Wrench
- For Use With: 3445MAX and 345MAX Series Air Grinder
- Material: Steel
Key Features:
- Item: Pressure Switch
- Fits Brand: Ingersoll Rand
- For Use With Mfr. Model Number: 7100
Key Features:
- Item: Rotor
- For Use With: 3/4 in Impact Wrench
- Number of Pieces: 1
Key Features:
- Item: Socket Set
Key Features:
- Item: Compressor Installation Kit, 1/2"
- Includes: (2) 1/2 in JIC to NPT Male Adapters, (4) 1/2 in x 4 in Foundation Bolts, (4) Vibration Pads, 1/2 in x 3 ft Braided Hose
- For Use With Mfr. Model Number: 45465101, 45465721
Key Features:
- Item: Small Wrench
- For Use With: Mfr. No.301, Mfr. No.302, Mfr. No.307, Mfr. No.308, Mfr. No.5102, Mfr. No.5108, Mfr. No.M2
Key Features:
- Item: Impact Wrench Gasket
- For Use With: 231HA, 231HA-2, 231R
Key Features:
- Battery Capacity: (2) 2.5 Ah
- Brushless Motor: Yes
- Drive Size: 3/8 in Square
Key Features:
- Item: Square Socket Retainer 1"
Key Features:
- Max. Air Compressor HP: 40 hp
- Max. Air Flow (SCFM): 175
- Absorption Module Volume (Gal.): 5 gal
Key Features:
- Item: Impact Wrench Care Kit
- For Use With: 261
- Type: -
Key Features:
- Anvil Impact Action: Mechanical
- Brushless Motor: Yes
- Corded/Cordless: Cordless
Key Features:
- Item: Drill
- HP: 0.4
- HP - Air Tools: 0.40
Key Features:
- Item: Disposable Vacuum Bags
- Overall Length: 11 in
- Compatible Manufacturer Model Number: 4151, 4152
Key Features:
- Item - Air Compressor: Rotary Screw Air Compressor
- Air Dryer Included: Yes
- HP - Air Compressor: 7.5 hp