2,000+ Results for PERLE SYSTEMS - Page 20
Key Features:
- Standards: IEEE 802.3
- Dual Power Input: 12/24/48 VDC
- Access Ports: Shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft)
Key Features:
- Standards: IEEE 802.3
- Dual Power Input: 12/24/48 VDC
- Access Ports: Shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft)
Key Features:
- Width: 3.1 in
- Height: 1 in
- Size: Maximum frame size of 2048 bytes
Key Features:
- Height: 0.9 in
- Width: 6.9 in
- Depth: 5.7 in
Key Features:
- Fiber Optic Cable Standard: 50/125 µm, 62.5/125 µm
- Number of LC Ports: 1
- Compatibility: Perle Media Converter Chassis
Key Features:
- Height: 1.2"
- Depth: 2.8"
- Width: 4.5"
Key Features:
- Copper link on / Receive activity (LKC): This green LED is operational only when power is applied. The LED i on when the 1000Base-T link is on and flashes with a 50% duty cycle when data is received. The LED will slow blink when the 1000Base-T interface has been taken down as a result of a fault on the 1000Base-T interface.
- Fiber link on / Receive activity (LKF): This green LED is operational only when power is applied. The LED is on when the 1000Base-X link is on and flashes with a 50% duty cycle when data is received. The LED will slow blink when the 1000Base-X interface has been taken down as a result of a fault on the 1000Base-T interface.
- Immunity: EN55024
Key Features:
- Width: 3.5"
- Height: 3.5"
- Depth: 2.4"
Key Features:
- Standards: IEEE 802.3
- Access Ports: Shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft)
- Dual Power Input: 12/24/48 VDC
Key Features:
- Bit Error Rate (BER): <10-12
- Link Pass Through: Enabled (Default)- When the state of the receiver is changed on the 100Base-TX interface it is reflected on the 100Base-FX fiber transmitter. When the state of the receiver on the 100Base-FX interface is changed it is reflected on the 100Base-TX transmitter; When a Far-End Fault Indication is received on the fiber interface the 100Base-TX transmitter is turned off. When the Far-End Fault Indication is cleared the transmitter is turned back on; Disabled- The 100Base-TX and the 100Base-FX fiber interface operate independently. Far-End Fault indication on the 100Base-FX fiber interface has no effect on the 100Base-TX interface.
- Electrical Safety: UL 60950-1
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- Compatibility: Perle MCR1900 Media Converter Chassis
- Number of Network (RJ-45) Ports: 1
Key Features:
- Compatibility: Perle Media Converter Chassis
- Form Factor: Internal
- Number of LC Ports: 1
Key Features:
- Fiber link 1 / Receive activity (LK1): This green LED is operational only when power is applied. The LED is on when the 100Base-X link is on and flashes with a 50% duty cycle when data is received.
- Edge Connecter: 32 pin DIN 41612 / IEC 60603-2 Type B/2 Male. Fist make, last break for ground and power
- Laser Safety: EN 60825-1:2007
Key Features:
- Standards: IEEE 802.3
- Dual Power Input: 12/24/48 VDC
- Access Ports: Shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft)
Key Features:
- Product Type: Data Transfer Adapter
- Adapter Type: RJ-45
Key Features:
- Width: 0.9"
- Height: 3.5"
- Depth: 3.3"
Key Features:
- Depth: 3.3"
- Height: 3.5"
- Width: 0.9"
Key Features:
- Current: 0.29 amps
- Fiber Optic Cable: Multimode dual SC [ 2 km/1.2 ] to single dual SC fiber connector model; Multimode: 62.5 / 125, 50/125, 85/125, 100/140 micron; Single Mode: 9/125 micron (ITu-T 625)
- Storage temperature: minimum range of -25 C to 70 C (-13 F to 158 F)
Key Features:
- Depth: 5.7 in
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- Height: 0.9 in
Key Features:
- Size: Maximum frame size of 2048 bytes
- Weight (Approximate): 5.28 oz
- Network Technology: 100Base-ZX, 10/100Base-TX
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- Height: 0.9 in
- Depth: 5.7 in
Key Features:
- Emissions: FCC Part 15 Class A, EN55022 Class A
- Operating Humidity: 5% to 90% non-condensing
- Power / TST: This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink when in Loopback test mode.
Key Features:
- Standards: IEEE 802.3
- Access Ports: Shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft)
- Dual Power Input: 12/24/48 VDC
Key Features:
- Operating Altitude: Up to 3,048 meters (10,000 feet)
- Operating Humidity: 5% to 90% non-condensing
- Bit Error Rate (BER): <10-12
Key Features:
- Operating temperature: 0° C to 50° C (32° F to 122° F)
- Emissions: FCC Part 15 Class A, EN55022 Class A
- Remote Loopback: The media converter can perform a loopback on the 1000Base-X fiber interface; Disabled (Default - Up); Enabled- The 1000Base-X receiver is looped to the 1000Base-X transmitter. The 1000Base-T transmitter is taken off the interface.
Key Features:
- Standards: IEEE 802.3
- Dual Power Input: 12/24/48 VDC
- Access Ports: Shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft)
Key Features:
- Magnetic Isolation: 1.5kv
- Laser Safety: EN 60825-1:2007
- Emissions: FCC Part 15 Class A, EN55022 Class A
Key Features:
- Laser Safety: EN 60825-1:2007
- Operating temperature: 0° C to 50° C (32° F to 122° F)
- Power / TST: This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink when in Loopback test mode.
Key Features:
- Product Name: CM-100-S2LC40 Fast Ethernet Media Converter
- Weight (Approximate): 5.29 oz
- Network Technology: 10/100Base-TX, 100Base-EX
Key Features:
- Depth: 2.4"
- Width: 2.8"
- Height: 3.5"
Key Features:
- Size: Maximum frame size of 2048 bytes
- Remote Loopback: The media converter can perform a loopback on the 100Base-X fiber interface; Disabled (Default - Up); Enabled- The 100Base-X receiver is looped to the 100Base-X transmitter. The 100Base-TX transmitter is taken off the interface.
- Auto-MDIX (Strap): If Auto-Negotiation (802.3u) is enabled, the media converter uses the HP Auto-MDIX method for the 100Base-TX interface. If Auto-Negotiation (802.3u) is disabled the Media converter will use the RX Energy method on the 100Base-TX interface to set the port MDI or MDIX whichever is appropriate; Enabled (Default)- Either a straight-through or crossover type cable can be used to connect the media converter to the device on the other end of the cable; Disabled- If the partner device on the other end of the cable does not have the Auto-MDIX feature a specific cable, either a straight-through or crossover will be required to ensure that the media converter's transmitter and the partner devices transmitter are connected to the others receiver. The Media converter's 100Base-TX port is configured as MDI-X with this switch setting.
Key Features:
- Interface Ports: Software selectable EIA232/422/485 on RJ45
- Input Voltage: 12v DC
- Serial Port Speeds: 300bps to 230Kbps with customizable baud rate support
Key Features:
- Immunity: EN55024
- Fiber Optic Cable: Multimode dual SC [ 2 km/1.2 ] to single dual SC fiber connector model; Multimode: 62.5 / 125, 50/125, 85/125, 100/140 micron; Single Mode: 9/125 micron (ITu-T 625)
- Emissions: FCC Part 15 Class B*, EN55022 Class B*
Key Features:
- Width: 0.7"
- Depth: 2.4"
- Height: 3.5"
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- Operating Humidity: 5% to 90% non-condensing
- Small Form Factor Pluggable ( SFP ) slot: Fix fiber ports single mode single SC; SFP slot models: Empty slot for 1000Base-X or 100Base-XSFP modules supplied by Perle,Ciscoor other manufacturers of MSA compliant SFPs; Hot insertion and removable ( hot swappable ).