2,000+ Results for PERLE SYSTEMS - Page 8
Key Features:
- Height: 0.9 in
- Width: 4.5 in
- Depth: 3.9 in
Key Features:
- Width: 17.1"
- Height: 1.7"
- Depth: 10.4"
Key Features:
- Width: 17.1"
- Height: 1.7"
- Depth: 10.4"
Key Features:
- Depth: 3.9 in
- Size: Maximum frame size of 10,240 bytes
- Height: 0.9 in
Key Features:
- Width: 4.5"
- Depth: 2.8"
- Height: 1.2"
Key Features:
- Depth: 3.9 in
- Height: 0.9 in
- Width: 4.5 in
Key Features:
- Operating Altitude: Up to 3,048 meters (10,000 feet)
- Operating temperature: 0 C to 50 C (32 F to 122 F)
- Electrical Safety: UL 60950-1
Key Features:
- Size: Maximum frame size of 10,240 bytes
- Height: 0.9 in
- Depth: 3.9 in
Key Features:
- Height: 1.1"
- Width: 3.2"
- Depth: 4.4"
Key Features:
- Color: Black
- Input Voltage: 100-240v AC
- Serial Port Speeds: 300bps to 230Kbps with customizable baud rate support
Key Features:
- Item: Power Supply
- Width: 1.9"
- Depth: 4.9"
Key Features:
- Width: 6.9 in
- Depth: 5.7 in
- Height: 0.9 in
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- 10/100/1000 Speed: This multi-color LED is operational only when power is applied. The LED is green when the speed of the copper ethernet port is running at 1000 Mbps. The LED is orange when the speed of the copper Ethernet port is running at 100 Mbps. The LED is off when in 10 Mbps.
- 10/100/1000Base-T: RJ45 connector; 2 pair CAT5, EIA/TIA 568A/B or better cable for 10/100; 4 pair CAT5 UTP cable for Gigabit; Single mode dual LC or multimode dual LC Media Converter; by using a mode conditioning patch cord
Key Features:
- Height: 1 in
- Width: 4.7 in
- Depth: 3.1 in
Key Features:
- Height: 1.1"
- Depth: 4.4"
- Width: 3.2"
Key Features:
- Width: 3.1 in
- Depth: 4.7 in
- Height: 1 in
Key Features:
- Width: 2.5"
- Depth: 3.5"
- Height: 0.9"
Key Features:
- Height: 1.8"
- Width: 3.6"
- Depth: 5"
Key Features:
- Height: 1.2"
- Width: 4.5"
- Depth: 2.8"
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- Network Technology: 10/100/1000Base-T, 1000Base-BX
- Compatibility: Perle Media Converter Chassis
Key Features:
- Depth: 3.9 in
- Width: 4.5 in
- Size: Maximum frame size of 10,240 bytes
Key Features:
- Depth: 4.7 in
- Width: 3.1 in
- Height: 1 in
Key Features:
- Depth: 5"
- Width: 3.6"
- Height: 1.8"
Key Features:
- Depth: 10.4"
- Width: 17.1"
- Height: 1.7"
Key Features:
- Height: 0.9"
- Depth: 3.5"
- Color: Black
Key Features:
- Size: Maximum frame size of 2048 bytes
- Edge Connecter: 32 pin DIN 41612 / IEC 60603-2 Type B/2 Male. Fist make, last break for ground and power
- Speed Copper: 100 (Default); 10
Key Features:
- Remote Loopback: The media converter can perform a loopback on the 100Base-X fiber ; interface; Disabled (Default - Up); Enabled- The ; 100Base-X receiver is looped to the 100Base-X transmitter. The ; 100Base-TX transmitter is taken off the interface.
- 100Base-TX: RJ45 connector, 2 pair CAT 5, EIA/TIA 568A/B or better cable
- Operating temperature: 0 C to 50 C (32 F to 122 F)
Key Features:
- Color: Black
- Width: 2.5"
- Height: 0.9"
Key Features:
- Size: Maximum frame size of 10,240 bytes
- Smart Link Pass-Through: Standard Mode (Default-Up): In this mode, if Fiber Negotiation is set to OFF, the links on the fiber and copper sides can be brought up and down independently of each other. A loss of link on either the fiber link or copper link can take place without affecting the other connection. However, if the Fiber Negotiation (switch 2) is set to Auto, then a loss of link on the copper side will result in a loss of link on the fiber side but not vice versa; Smart Link Pass-Through (Down): In this mode, the link state on one connection is directly reflected through the media converter to the other connection. If link is lost on one of the connections, then the other link will be brought down by the media converter.
- Loopback: Disabled (Default-Up): The loopback feature is disabled. This is the normal position for regular operation. The switch must be set to this position for data to pass through the media converter; Enabled: This is a test mode. All data received on the receive (RX) fiber connection is looped back to the transmit (TX) fiber connection. The state of the copper is not relevant and no data or link status is passed through to the copper side.
Key Features:
- Height: 1.7 in
- Depth: 3.1 in
- Width: 4.7 in
Key Features:
- Height: 1.2"
- Depth: 2.8"
- Width: 4.5"
Key Features:
- Depth: 5"
- Height: 1.8"
- Width: 3.6"
Key Features:
- Size: Maximum frame size of 2048 bytes
- Operating Altitude: Up to 3,048 meters (10,000 feet)
- Link Pass Through: Enabled (Default)- ; When the state of the receiver is changed on the 100Base-TX interface it ; is reflected on the 100Base-FX fiber transmitter. When the state of the ; receiver on the 100Base-FX interface is changed it is reflected on the ; 100Base-TX transmitter; When a Far-End Fault Indication is received on the fiber interface the ; 100Base-TX transmitter is turned off. When the Far-End Fault Indication ; is cleared the transmitter is turned back on; Disabled- The ; 100Base-TX and the 100Base-FX fiber interface operate independently. ; Far-End Fault indication on the 100Base-FX fiber interface has no effect ; on the 100Base-TX interface.
Key Features:
- Depth: 3.5"
- Color: Black
- Width: 2.5"
Key Features:
- Width: 17.1"
- Depth: 10.4"
- Height: 1.7"
Key Features:
- Size: Maximum frame size of 2048 bytes
- Copper link on / Receive activity ( LKC 1/2 ): This green LED is operational only when power is applied. The LED will blink along with transmit/receive data on the 10/100/1000 UTP port; If a loss of link on the copper port results in a Link Passthrough condition to the fiber port, this LED will blink at a rate of once every 2 seconds until the condition is cleared.
- PSE Status: This LED will signify the status of the PSE function. Using multi-color and blinking the unit will show the following status for the PSE; GREEN - Solid: The PSE has successfully detected a compliant PD and is applying power over the UTP (for legacy pin out simply show active power when applied); YELLOW - Solid: The PSE is not active. This means the PSE has been configured to provide power, but the PD is : Not connected; Has not detected a compliant PD and is not applying power; PSE has turned off power for Reset function; OFF - PSE function switch disabled; RED - Blinking: Error Conditions; Capacitance too High - 1 blink; Resistance too Low or short circuit - 2 blinks; Resistance too high or open circuit - 3 blinks