4,000+ Results for Enclosure Covers & Accessories - Page 14
Key Features:
- Item: Accessories
- Size: 0.62 in x 0.62 in x 0.97 in (H x W x D)
- Features: For Eclipse and Series 2000 Enclosures; Field installable inserts replace standard quarter turn slot; Available in double bit, square and triangle formats, as well as slotted; Maintains NEMA, UL and CSA 12, 4 and 4X ratings; Non-slot inserts provide extra security since standard screw drivers cannot open; Keys sold separately from inserts.
Key Features:
- Item: Accessories
- Material: Steel
- Features: 14 gauge steel finished in white; Panels and mounting hardware are included with NIA Series enclosures.
Key Features:
- Item: Accessories
- Material: Steel
- Features: Replacement panels for N1J Series enclosures; Optional panels for C3R HCR SM Series enclosures; Made from 16 ga steel; White powder finish
Key Features:
- Item: Accessories
- Features: Field installable; Interchangeable with standard quarter turn latches on Eclipse/Eclipse Jr series; Maintains NEMA, UL and CSA ratings as noted.
Key Features:
- Item: Accessories
- Material: Steel
- Features: Maintain environmental protection level of Type 4, 4X (for stainless steel) as noted; Window is 0.25" thick, UV resistant Polycarbonate; Frame is heavy gauge steel, or 304 stainless steel with integral weld studs and compression clips; Oil resistant neoprene gasket ensures a watertight seal; Finished in ANSI 61 gray recoatable powder or natural brushed stainless steel.
Key Features:
- Item: Accessories
- Material: Steel
- Features: For use with N1J series enclosures; Made from 16 ga steel; Accepts self tapping screws eliminating timely measurement, marking and drilling of component mounting holes; 1/8" dia holes on 1/4" staggered centers; ANSI 61 gray powder finish
Key Features:
- Item: Accessories
- Material: Galvanized Steel
- Features: Larger than standard NEMA panel used in same sized enclosure; 12gauge steel construction; Larger sizes have 2 or 4 formed flanges for added strength; Slotted corner design for easier mounting; Finished in white or unpainted galvanized.
Key Features:
- Item: Accessories
- Material: Steel
- Features: Maintains NEMA rating of system; Formed 14 gauge steel; Also offered with formed 14 gauge stainless steel; Stiffeners added for solid stability; Open top and bottom provides an unobstructed wireway for pull through cabling; Can be mounted directly on floor or on a plinth; Available in light gray and stainless steel.
Key Features:
- Item: Accessories
- Material: Steel
- Features: Hinged panel allows access to internally mounted equipment; Can be hinged from either side; 12 gauge steel construction; Slotted quarter turn latches provide closure; Adding optional locking quarter turn latches (Part Number EQTRL) convert this to a dead front panel; Complete with 4 depth adjustment brackets; Hardware kit maintains UL, CSA and NEMA ratings when field installed; Finished in white; (Note: Not compatible with DSTOPK door stop kit.)
Key Features:
- Item: Accessories
- Material: Steel
- Features: For use with N1J series enclosures; Made from 16 ga steel; Accepts self tapping screws eliminating timely measurement, marking and drilling of component mounting holes; 1/8" dia holes on 1/4" staggered centers; ANSI 61 gray powder finish
Key Features:
- Item: Accessories
- Material: Stainless Steel
- Features: Steel panels are 12 gauge steel and are finished in white; Galvanized panels are 12 gauge unpainted galvanized steel; Stainless steel panels are 12 gauge and are brushed 316 SS; Aluminum panels are 5052-H32 aluminum alloy; Larger panels have two or four formed flanges; Some larger panels are 10 gauge; Panel mounting hardware not included (provided with enclosure).
Key Features:
- Item: Accessories
- Material: Stainless Steel
- Features: Steel panels are 12 gauge steel and are finished in white; Galvanized panels are 12 gauge unpainted galvanized steel; Stainless steel panels are 12 gauge and are brushed 316 SS; Aluminum panels are 5052-H32 aluminum alloy; Larger panels have two or four formed flanges; Some larger panels are 10 gauge; Panel mounting hardware not included (provided with enclosure).
Key Features:
- Item: Accessories
- Material: Steel
- Features: Hinged panel allows access to internally mounted equipment; Can be hinged from either side; 12 gauge steel construction; Slotted quarter turn latches provide closure; Adding optional locking quarter turn latches (Part Number EQTRL) convert this to a dead front panel; Complete with 4 depth adjustment brackets; Hardware kit maintains UL, CSA and NEMA ratings when field installed; Finished in white; (Note: Not compatible with DSTOPK door stop kit.)
Key Features:
- Item: Accessories
- Material: Steel
- Features: Larger than standard NEMA panel used in same sized enclosure; 12gauge steel construction; Larger sizes have 2 or 4 formed flanges for added strength; Slotted corner design for easier mounting; Finished in white or unpainted galvanized.
Key Features:
- Item: Accessories
- Features: Field installable; Interchangeable with standard quarter turn latches on Eclipse/Eclipse Jr series; Maintains NEMA, UL and CSA ratings as noted.
Key Features:
- Item: Accessories
- Material: Galvanized Steel
- Features: Steel panels are 12 gauge steel and are finished in white; Galvanized panels are 12 gauge unpainted galvanized steel; Stainless steel panels are 12 gauge and are brushed 316 SS; Aluminum panels are 5052-H32 aluminum alloy; Larger panels have two or four formed flanges; Some larger panels are 10 gauge; Panel mounting hardware not included (provided with enclosure).
Key Features:
- Item: Accessories
- Material: Steel
- Features: Larger than standard NEMA panel used in same sized enclosure; 12gauge steel construction; Larger sizes have 2 or 4 formed flanges for added strength; Slotted corner design for easier mounting; Finished in white or unpainted galvanized.
Key Features:
- Item: Accessories
- Material: Steel
- Features: Extra deep kits are designed to provide protection and easy access to components and equipment installed inside an enclosure; Frame is 14 gauge mild steel or 316L stainless steel; Maintain environmental protection level of enclosure. Painted mild steel maintain Type 4 and 12. Stainless Steel maintain Type 4, 4X and 12; Quarter turn latch for easy access; 2.5 inches of extra usable depth; Oil resistant neoprene gasket ensures a watertight seal; Hinges can be oriented in any direction; Conveniently sized to allow mounting on any enclosure with a suitable mounting surface; Mounting hardware and template are included; Finished in ANSI 61 gray recoatable powder or natural brushed stainless steel.
Key Features:
- Item: Accessories
- Material: Stainless Steel
- Size: 1 in x 18 in x 18 in (H x W x D)
Key Features:
- Item: Accessories
- Material: Steel
- Features: Used to provide convenient mounting for terminal blocks in 1414 Series enclosures and some sizes of "PJ" Series enclosures; Finished in white.
Key Features:
- Item: Accessories
- Material: Steel
- Features: Kit includes two mounting feet and hardware kit; Pre-punched mounting feet may be used as a template to drill holes on bottom of enclosure; Finished in gray or natural brushed 304 stainless steel.
Key Features:
- Item: Accessories
- Material: Steel
- Features: Used to provide convenient mounting for terminal blocks, pneumatic controls or small relays in 1418 wallmount enclosures; Brackets may be installed horizontally or vertically in an enclosure if the size corresponds to enclosure length or width; Finished in white.
Key Features:
- Item: Accessories
- Material: Steel
- Features: For use with N1J series enclosures; Made from 16 ga steel; Accepts self tapping screws eliminating timely measurement, marking and drilling of component mounting holes; 1/8" dia holes on 1/4" staggered centers; ANSI 61 gray powder finish
Key Features:
- Item: Accessories
- Material: Steel
- Features: Larger than standard NEMA panel used in same sized enclosure; 12gauge steel construction; Larger sizes have 2 or 4 formed flanges for added strength; Slotted corner design for easier mounting; Finished in white or unpainted galvanized.
Key Features:
- Item: Enclosure
- Material: Steel
- Finish: Available in RAL 7035 light gray textured powder coating and natural stainless steel with a smooth, brushed finish; Desk covers available in same finishes.
Key Features:
- Item: Accessories
- Material: Steel
- Features: Formed from 10 gauge steel, frames are drilled and tapped to EIA requirements for mounting standard 19" rack accessories; Designed for installation in 72" and 90" high enclosures. The swing frame pivots on 0.5" pins within the enclosure for easy access to the rear of rack mounted equipment; The frame positions at any depth within the enclosure and is fastened in the closed position with quarter turn fasteners; Swing frames may be mounted in 30" and 36" wide enclosures, or in 60" and 72" wide enclosures with an optional center panel support; One or two frames may be mounted in 30" and 36" wide enclosures with dual access, and 1,2,3 or 4 frames may be mounted in 60" and 72" wide dual access enclosures; Finished in black; TAA compliant for GSA Schedule purchases; RoHS Compliant; Manufactured in North America.
Key Features:
- Item: Accessories
- Material: Stainless Steel
- Features: Steel panels are 12 gauge steel and are finished in white; Galvanized panels are 12 gauge unpainted galvanized steel; Stainless steel panels are 12 gauge and are brushed 316 SS; Aluminum panels are 5052-H32 aluminum alloy; Larger panels have two or four formed flanges; Some larger panels are 10 gauge; Panel mounting hardware not included (provided with enclosure).
Key Features:
- Item: Accessories
- Material: Steel
- Features: Provides 19" or 24" mounting capability; Sold in pairs; Formed from 10 gauge steel; Drilled and tapped 10-32 to EIA spacing of 0.5" - 0.63" - 0.63" - 0.5"; Compatible with 1418FS and HN4FS enclosures; Finished in white.
Key Features:
- Item: Accessories
- Material: Steel
- Features: 14 gauge steel panels are finished in white; Used in both single access and dual access bases; Available in 4 widths; Mounts into "C" Channel Mounting Kit (not included.); Hardware required for mounting into "C" channels is included.
Key Features:
- Item: Accessories
- Material: Galvanized Steel
- Features: Formed from 10 gauge or 12 gauge steel; All double door width panels are 10 gauge steel; Width panels are available in full or half height; Depth panels are available in full height only; Depth and width panels are provided with all mounting hardware and center support where required; Half panel can be mounted in the top or bottom half of the enclosure; Finished in white.
Key Features:
- Item: Enclosure
- Material: Steel
- Finish: Cover and enclosure are phosphatized and finished in ANSI 61 gray powder coating.
Key Features:
- Item: Accessories
- Material: Steel
- Features: Easily installed on Type 12, 4 and 4X wall-mount enclosures using stainless steel bolts and sealing washers (included); Designed not to interfere with door clamps; Protects door from dripping water and settling dust; Constructed in 14 gauge mild steel (painted) or 316 stainless steel; Maintains enclosure rating.
Key Features:
- Item: Accessories
- Material: Galvanized Steel
- Features: Steel panels are 12 gauge steel and are finished in white; Galvanized panels are 12 gauge unpainted galvanized steel; Stainless steel panels are 12 gauge and are brushed 316 SS; Aluminum panels are 5052-H32 aluminum alloy; Larger panels have two or four formed flanges; Some larger panels are 10 gauge; Panel mounting hardware not included (provided with enclosure).
Key Features:
- Item: Accessories
- Material: Steel
- Features: Easily installed on Type 12, 4 and 4X wall-mount enclosures using stainless steel bolts and sealing washers (included); Designed not to interfere with door clamps; Protects door from dripping water and settling dust; Constructed in 14 gauge mild steel (painted) or 316 stainless steel; Maintains enclosure rating.
Key Features:
- Item: Accessories
- Material: Stainless Steel
- Features: Steel panels are 14 gauge steel and are finished in white; Fiberglass panels (off-white) in NEMA sizes; Aluminum panels are 0.080 type 5052 H-32 aluminum, unpainted; Galvanized panels are 14 gauge unpainted galvanized steel; Stainless steel panels are 14 gauge and are brushed 304 SS; Mounting hardware is included with the enclosure; Steel panels and mounting hardware are included with 1414 Series enclosures; Galvanized panels and mounting hardware are included with the EJ Series enclosures; Mounting hardware is included with PJ Series enclosures, order panel separately.
About Enclosure Covers & Accessories
Properly conceal newly installed NEMA enclosures with all the electrical enclosure accessories you need from Zoro. Electrical enclosures can help protect your electrical work from dirt, debris, and spills. Whether you’re shopping for hole seals, louver plates, or other parts, we have all the finishing touches you need in a variety of styles and materials. Shop from the most trusted brands at everyday low prices. Find related products in our electrical enclosures category.