This item is Discontinued.
This item is Discontinued.
Master Tool Set, Technician, 1046-Pieces (Discontinued)
Mfr #
JCS-1046MAS
Zoro #
G7470547
UPC # 662679990923
Country of Origin United States
Category General Hand Tool Kits
Unlock 30-day payment terms
Business customers can apply for Net 30—no fees, no interest, fast approval.
Terms apply.
Get 10% off your order
Sign up for our email list and receive your promo code via email.
You may also like
Specifications
Details
- MFR #
- JCS-1046MAS
- Zoro #
- G7470547
- UPC #
- 662679990923
- Country of Origin
- United States
- Item
- Master Tool Set
- Number of Pieces
- 1,046
- Includes
- Blow Molded Box, (3) Blow Mold Red Case, Folding Knife Sheath, Tool Roll: 3 Pockets, 5 Pockets, (3) 7 Pockets, 8 Pockets, 9 Pockets, (2) 10 Pockets, (2) 11 Pockets, 13 Pockets, 14 Pockets, 15 Pockets, 18 Pockets, 26 Pockets
- SAE or Metric
- Metric, SAE
- Wrenches Included
- (1) Chain Wrench, (1) Torque Wrench, (3) Pipe Wrenches, (32) Flare Nut Wrenches, (35) Box End Wrenches, (49) Crowfoot Wrenches, (5) Adjustable Wrenches, (53) Combination Wrenches, (61) Open End Wrenches
- Number of Screwdrivers
- 61
- Measuring Tools Included
- Ignition 10 Blade Set: 0.013 in, 0.015 in, 0.017 in, 0.018 in, 0.020 in, 0.025 in, 0.030 in, 0.032 in, 0.035 in, 0.040 in, Magnetic Torpedo: 9 in, Tape: 12 ft x 1/2 in
- Number of Electrical and Telecomm Tools
- 1
- No. of Putty Knives and Scrapers Included
- 4
- Prybars and Pullers Included
- Prybar Aligning: 18 in, 24 in, Prybar Large Handle: 18 in, 28 in, Prybar Rolling Head: 12 in, 16 in, Prybar Wonder Bar: 12-3/4 in, Puller Jaw Block: 6 Ton, 10 Ton, Puller Jaw Block Reversible: 6 Ton, Puller Blind Bearing Coll, Puller Blind Bearing Screw, Puller Cap Screw, Puller Cap Screw 3/8"-24 UNC x 3 in, Puller Crossarm: 2 Way, 3 Way, Puller Crossarm 6 Ton 2 Way, Puller Handle T-Rod, Puller Jaw 10 Ton: Cap Screw, Dual-Reach, Narrow, Reversible, Puller Jaw 6 Ton, Pull Jaw 6 Ton Narrow, (2) Puller Jaw Block Lock Screw, (2) Puller Jaw Inside Hook, Puller Jaw Reversible: 4 in Reach, 6 in Reach, Puller Nut Adjustable Reversible, (2) Puller Nut Hex, Puller Pin Pivot, Puller Rear Axle Flange F, Puller Rod Slide ACME Threader, Puller Rod Threader 3/4"-16 UNF x 13 in, (2) Puller Screw Cap, (2) Puller Screw Forcing ACME, (2) Puller Separator Plate, Puller Slide Hammer: 2-1/2 lb, 5 lb, (2) Puller Slotted Crossarm, (2) Puller Spring Cap, Puller Step Plate: 1 in, 1-1/2 in, 1-1/4 in, 1-1/8 in, 1-3/4 in, 1-3/8 in, 1-5/8 in, 1-7/8 in, 2 in, 2-1/4 in, 2-1/8 in, 2-3/8 in, 3/4 in, 7/8 in, (2) Puller Tip Detachable, Yoke 2-Way ACME Threader, Yoke 3-Way Jaw ACME
- Drilling, Extracting, and Tapping Tools
- Bolt Extractor: 7mm (Turns 1/4, 9/32"), 8mm (Turns 5/16"), 9mm (Turns 11/32"), 3/8", 10mm, 11mm (Turns 7/16"), 12mm, 13mm (Turns 1/2"), 14mm (Turns 9/16"), 15mm (Turns 16mm, 5/8"), & Tool Holder, Screw Extractor: 1/8", 1-1/16", 13/16", 15/32", 15/64", 21/32", 3/16", 3/8", 5/16", 9/16"
- Number of Cutting Tools
- 0
- Number of Sockets/Accs.
- 508
- Number of Miscellaneous Tools
- 2
- Number of Measuring Tools
- 12
- Inspection and Retrieving Tools Included
- None
- Pliers Included
- Lineman's Pliers, (2) Diagonal-Cutting Pliers, (2) Slip-Joint Pliers, (4) Specialty Pliers, (6) Long-Nose Pliers, (6) Retaining-Ring Pliers
- Screwdrivers Included
- Jewelers Precision 6 PC: #1, #0, 1.4mm, 2mm, 2.4mm, 3mmMagnetic 28 PC: Clutch 1/8 in, 5/32 in, Phillips #0, #1, #2, #3, Robertson Square Recess #0, #1, #2, #3, Slotted 1/8 in, 5/32 in, 7/32 in, 1/2 in, 9/32 in, Socket Heads 5/64 in, 3/32 in, 1/8 in, 5/32 in, 3/16 in, Torx(R) T10, T15, T20, T25, T30, T40, Phillips: 5-3/4 in, Phillips Round: #0 x 3 in, #1 x 3 in, #1 x 8 in, #2 x 4 in, #2 x 8 in, #3 x 4 in, #4 x 8 in, Phillips Round Stubby: #2 x 1-1/2 in, Ratcheting Magnetic 5 PC: Phillips #1, #2, Slotted 5/32 in, 3/16 in, Slotted: 5-5/8 in, Slotted Cabinet Round: 1/8 in x 3 in, 1/8 in x 4 in, 1/8 in x 8 in, 3/16 in x 4 in, 3/16 in x 8 in, Slotted Cabinet Round Stubby: 1/4 in x 1-1/2 in, Slotted Pocket: 1/8 in x 2 in, Slotted Square: 1/4 in x 4 in, 3/16 in x 4 in, 3/8 in x 8 in, 3/8 in x 12 in, 5/16 in x 6 in
- Tool Families Included
- Abrasives and Finishing Tools, Drivers and Bits, Inspection and Retrieving Tools, Pliers, Sockets and Accessories, Wrenches
- Hex and Torx Keys Included
- Hex Key 13 PC: 3/64 in, 1/16 in, 5/64 in, 3/32 in, 7/64 in, 1/8 in, 9/64 in, 5/32 in, 3/16 in, 7/32 in, 1/4 in, 5/16 in, 3/8 in, Hex Key 9 PC: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm
- 1 In. Drive Sockets/Accs. Included
- Handle Sliding-T
- Included Storage
- Mfr. No. J9969-R
- 3/8 In. Drive Sockets/Accs. Included
- (3) Ratchet, Crowfoot Open End: 1 in, 1/2 in, 11/16 in, 13/16 in, 15/16 in, 3/4 in, 3/8 in, 5/8 in, 7/16 in, 7/8 in, 9/16 in, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, Extension Flexible: 8 in, Extension Locking: 6 in, Extension Wobble: 3 in, 6 in, 8 in, Extension: 3 in, 6 in, 12 in, Hand Impact Driver: 5-1/2 in, Handle Hinge: 8-1/2 in, Handle Sliding-T: 12-15/16 in, Handle Speeder: 18 in, Socket 12 PT: 1 in, 1/2 in, 1/4 in, 11/16 in, 13/16 in, 15/16 in, 3/4 in, 3/8 in, 5/16 in, 5/8 in, 7/16 in, 7/8 in, 9/16 in, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, Socket 8 PT: 1/2 in, 1/4 in, 3/8 in, 5/16 in, 7/16 in, Socket Bit Phillips: #2, #3, #4, Socket Bit Slotted: 1/4 in, Socket Clip, Socket Deep 12 PT: 1 in, 1/2 in, 1/4 in, 11/16 in, 13/16 in, 15/16 in, 3/4 in, 3/8 in, 5/16 in, 5/8 in, 7/16 in, 7/8 in, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, Socket Hex Bit: 1/4 in, 1/8 in, 3/16 in, 3/8 in, 5/16 in, 5/32 in, 7/32 in, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, Socket Impact 6 PT: 1 in, 1/2 in, 1/4 in, 11/16 in, 11/32 in, 13/16 in, 15/16 in, 3/4 in, 3/8 in, 5/16 in, 5/8 in, 7/16 in, 7/8 in, 9/16 in, 9/32 in, Universal Joint, Universal Socket 12 PT: 1/2 in, 11/16 in, 3/4 in, 3/8 in, 5/8 in, 7/16 in, 9/16 in,, Universal Socket 6 PT: 1/2 in, 11/16 in, 3/4 in, 3/8 in, 5/8 in, 7/16 in, 9/16 in, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm
- Primary Application
- Technician
- Cutting Tools Included
- None
- Number of Inspection and Retrieving Tools
- 0
- Tool Storage Included
- No
- Putty Knives and Scrapers Included
- None
- Nut Drivers and Nutsetters Included
- Nut Driver: 1/2 in x 2-3/4 in, 1/4 in x 2-3/4 in, 11/32 in x 2-3/4 in, 3/16 in x 2-3/4 in, 3/8 in x 2-3/4 in, 5/16 in x 2-3/4 in, 5/8 in x 2-3/4 in, 7/16 in x 2-3/4 in, 7/32 in x 2-3/4 in, 9/16 in x 2-3/4 in, 9/32 in x 2-3/4 in, 4mm x 4 in, 5mm x 4 in, 5.5mm x 4 in, 6mm x 4 in, 7mm x 4 in, 8mm x 4 in, 9mm x 4 in, 10mm x 4 in, 11mm x 4 in, 12mm x 4 in, 13mm x 4 in, 14mm x 4 in,
- Number of Prybars and Pullers
- 67
- Number of Wrenches
- 240
- Number of Drilling, Extracting, and Tapping Tools
- 20
- 1/2 In. Drive Sockets/Accs. Included
- Crowfoot Flare Nut: 1-1/2", 1-1/4", 1-1/8", 1-11/16", 1-13/16", 1-3/16", 1-3/4", 1-3/8", 1-5/16", 1-5/8", 1-7/16", 1-7/8", 1-9/16", Crowfoot Open End: 1", 1-1/16", 1-1/2", 1-1/4", 1-1/8", 1-11/16", 1-13/16", 1-3/16", 1-3/4", 1-3/8", 15/16", 1-5/16", 1-5/8", 1-7/16", 1-7/8", 1-9/16", Drag Link: 3/4", 15/16", Extension: 2-1/2", 5", 10", Extension Impact: 2", 5", Extension Locking: 10", Extension: 2-1/2", Handle Hinge: 18-5/8", Handle Speed, Ratchet Adapter, Ratchet Classic Pear Head, Ratchet Flex Head, Ratchet Long Classic Pear Head, Socket 12 PT: 1", 1/2", 11/16", 1-1/16", 1-1/2", 1-1/4", 1-1/8", 13/16", 1-3/16", 1-3/8", 15/16", 1-5/16", 1-7/16", 19/32", 25/32", 29/32", 3/4", 3/8", 5/8", 7/16", 7/8", 9/16", 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, Socket 8 PT: 1", 1/2", 11/16", 13/16", 3/4", 3/8", 5/8", 7/16", 7/8", 9/16", Socket Deep 12 PT: 1", 1/2", 11/16", 1-1/16", 1-1/4", 1-1/8", 13/16", 15/16", 3/4", 5/8", 7/8", 9/16", 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, Socket Clip, Socket Hex Bit: 1/2", 1/4", 3/8", 5/16", 5/8", 7/16", 9/16", 12mm, 14mm, 17mm, Socket Impact 6 PT: 1", 1/2", 11/16", 1-1/16", 1-1/4", 1-1/8", 13/16", 1-3/16", 3/4", 3/8", 5/8", 7/16", 7/8", 9/16", 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, Socket Impact Deep 6 PT: 1", 1/2", 11/16", 1-1/16", 1-1/2", 1-1/4", 1-1/8", 13/16", 1-3/16", 1-3/8", 15/16", 1-5/16", 1-7/16", 3/4", 3/8", 5/8", 7/16", 7/8", 9/16", 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, Socket Impact Hex Bit: 1/2", 1/4", 3/8", 5/16", 5/8", 7/16", 9/16", Universal Joint, Universal Socket: 1/2", 5/8", 9/16",
- 3/4 In. Drive Sockets/Accs. Included
- Extension: 4 in, 8 in, 16 in, Handle Sliding-T, Ratchet Classic Pear head: 20 in, Socket 12 PT: 1 in, 1-1/16 in, 1-1/2 in, 1-1/4 in, 1-1/8 in, 1-11/16 in, 1-13/16 in, 1-3/16 in, 1-3/4 in, 1-3/8 in, 15/16 in, 1-5/16 in, 1-5/8 in, 1-7/16 in, 1-7/8 in, 1-9/16 in, 2 in, 2-1/4 in, 2-1/8 in, 2-3/16 in, 2-3/8 in, 7/8 in, Socket Impact 6 PT: 1 in, 1-1/16 in, 1-1/4 in, 1-1/8 in, 13/16 in, 1-3/16 in, 15/16 in, 1-5/16 in, 3/4 in, 7/8 in, Universal Joint
- Number of Hex and Torx Keys
- 22
- Striking Tools Included
- Chisel/Punch Holder, Chisel Cold: 1 in, 1/2 in, 1/4 in, 1-3/16 in, 3/4 in, 3/8 in, 5/16 in, 5/8 in, 7/8 in, Hammer Ball Pein: 8 oz, 16 oz, 32 oz, Hammer Brass 1-1/2 lb, Hammer Dead Blow Combo Face: 28 oz, 56 oz, Hammer Soft Face: 13-1/2 in, Rubber Mallet, Punch Center: 1/2 in, 3/8 in, Punch Drift: 1/4 in, 1/8 in, 3/16 in, Punch Pin: 1/4 in, 1/8 in, 3/16 in, 3/32 in, 5/32 in, 7/32 in, Punch Prick: 5/16 in, Punch Starting: 1/4 in, 1/8 in, 3/16 in, 3/32 in, 7/32 in, Tip Hammer Surface Protective 1-1/2 in : Extra hard, Hard, Medium, Medium Hard, Soft, Super Soft, Tough.
- Number of Consumable Parts
- 0
- 1/4 In. Drive Sockets/Accs. Included
- Crowfoot Open End: 1/2 in, 1/4 in, 3/8 in, 5/16 in, 7/16 in, 9/16 in, Extension: 2 in, 3 in, 6 in, Extension Flexible: 1/4 in, Extension Locking: 6 in, Extension Wobble: 3 in, Handle Hinge: 5/3/4 in, 20 in, Handle Sliding-T, Handle Speeder, Ratchet, Socket 6 PT: 1/2 in, 1/4 in, 11/32 in, 3/16 in, 3/8 in, 5/16 in, 7/16 in, 7/32 in, 9/16 in, 9/32 in, 4mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, Socket 8 PT: 1/4 in, 3/8 in, 5/16 in, Socket 12 PT: 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, Socket Bit Phillips: #1, #2, Socket Bit Slotted: (2) 1/4 in, 3/16 in, Socket Deep 6 PT: 1/2 in, 1/4 in, 11/32 in, 3/16 in, 3/8 in, 5/16 in, 7/16 in, 7/32 in, 9/16 in, 9/32 in, 4mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, Socket Hex Bit: 1/16 in, 1/4 in, 1/8 in, 3/16 in, 3/32 in, 5/16 in, 5/32 in, 5/64 in, 7/32 in, 7/64 in, 9/64 in, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, Socket Clip, Socket Driver, Universal Joint, Universal Socket: 1/2 in, 1/4 in, 11/32 in, 3/8 in, 5/16 in, 7/16 in, 7/32 in, 9/16 in, 9/32 in,
- Drilling, Extracting, and Tapping Tools Included
- Bolt Extractor: 7mm (Turns 1/4, 9/32 in), 8mm (Turns 5/16 in), 9mm (Turns 11/32 in), 3/8 in, 10mm, 11mm (Turns 7/16 in), 12mm, 13mm (Turns 1/2 in), 14mm (Turns 9/16 in), 15mm (Turns 16mm, 5/8 in), & Tool Holder, Screw Extractor: 1/8 in, 1-1/16 in, 13/16 in, 15/32 in, 15/64 in, 21/32 in, 3/16 in, 3/8 in, 5/16 in, 9/16 in
- Number of Striking Tools
- 42
- Number of Deburring and Finishing Tools
- 1
- Number of Pliers
- 32
- Tool Storage Type Included
- Box
- Nonsparking
- No
- Recommended Tool Boxes
- J455743-13RD
- Miscellaneous Tools Included
- (1) C-Clamp, (1) Tap and Die
- Tool Kit Product Grouping
- Tool Kits
- Deburring and Finishing Tools Included
- Ignition Point File
- Number of Nut Drivers and Nutsetters
- 23
- Electrical and Telecomm Tools Included
- Wire Stripper: 8-1/4 in
- Sub-Category
- Maintenance Set
- Insulated
- Uninsulated
- Measurement Type
- Metric/SAE
- Screwdrivers, Keys, and Bits Included
- (10) Slotted Screwdrivers, (2) Bit Holders, (2) Multi-Bit Screwdrivers, (2) Screw Starters, (22) Hex Keys, (79) Screwdriver Bits, (8) Phillips Screwdrivers
- Number of Putty Knives and Scrapers
- 0
- Sockets, Drive Tools, and Accessories Included
- (243) Sockets, (48) Accessories, (50) Socket Bits, (7) Impact Socket Bits, (89) Impact Sockets, (10) Drive Tools
- Number of Sockets, Drive Tools, and Accessories
- 447
- HVAC Tools Included
- None
- Number of HVAC Tools
- 0
- Number of Electrical and Telecom Tools
- 0
- Measuring and Testing Tools Included
- None
- Number of Plumbing Tools
- 0
- Tool Storage Type
- None, Tools Only
- Foam Inserts Included
- No
- Abrasives and Finishing Tools Included
- None
- Number of Striking and Struck Tools
- 0
- Plumbing Tools Included
- None
- Non-Sparking
- No
- Number of Measuring and Testing Tools
- 0
- Number of Screwdrivers, Keys, and Bits
- 125
- Electrical and Telecom Tools Included
- None
- Striking and Struck Tools Included
- None
- Number of Abrasives and Finishing Tools
- 0
- Wrenches Included
- Adjustable: 6 in, 8 in, 10 in, 12 in, 15 in, Angle Open End FP: 1 in, 1/2 in, 11/16 in, 1-1/16 in, 1-1/4 in, 1-1/8 in, 13/16 in, 15/16 in, 3/4 in, 3/8 in, 5/8 in, 7/16 in, 7/8 in, 9/16 in, Angle Open End Satin: 1/2 in, 1/4 in, 11/32 in, 15/64 in, 3/8 in, 5/16 in, 7/16 in, 7/32 in, 9/32 in, Angle Open End: 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, Chain Universal: 16-1/2 in, Combo 12 PT: 1 in, 1/2 in, 11/16 in, 1-1/16 in, 1-1/2 in, 1-1/4 in, 1-1/8 in, 13/16 in, 1-3/8 in, 15/16 in, 1-5/16 in, 1-7/16 in, 3/4 in, 3/8 in, 5/16 in, 5/8 in, 7/16 in, 7/8 in, 9/16 in, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, Combo 6PT: 1/8 in, 3/16 in, 5/32 in, Combo Flare Nut 6 PT: 1/2 in, 11/16 in, 3/4 in, 3/8 in, 5/8 in, 7/16 in, 9/16 in, Combo Flex 12 PT: 1/2 in, 11/16 in, 3/4 in, 3/8 in, 5/8 in, 7/16 in, 9/16 in, Double Box 12 PT: 1-1/16 in x 1-1/8 in, 11/16 in x 3/4 in, 13/16 in x 7/8 in, 15/16 in x 1 in, 5/16 in x 3/8 in, 7/16 in x 1/2 in, 9/16 in x 5/8 in, Flare Nut 6 PT: 7mm x 8mm, 9mm x 11mm, 10mm x 12mm, 13mm x 14mm, 15mm x 17mm, Ignition: 1/4 in x 7/32 in, 11/32 in x 3/8 in, 13/64 in x 15/64 in, 15/64 in x 13/64 in, 3/8 in x 11/32 in, 5/16 in x 9/32 in, 7/32 in x 1/4 in, 9/32 in x 5/16 in, Obstruction Box: 5/8 in x 3/4 in, 7/16 in x 1/2 in, 9/16 in x 5/8 in, Offset Box 12 PT: 6mm x 7mm, 8mm x 9mm, 10mm x 11mm, 12mm x 13mm, 14mm x 15mm, 16mm x 18mm, 17mm x 19mm, 21mm x 24mm, 22mm x 24mm, 27mm x 30mm, 30mm x 32mm, Open End: 1/2 in x 9/16 in, 1/4 in x 5/16 in, 1-1/16 in x 1-1/8 in, 11/16 in x 3/4 in, 13/16 in x 7/8 in, 15/16 in x 1 in, 3/8 in x 5/16 in, 5/8 in x 3/4 in, 7/16 in x 1/2 in, 9/16 in x 5/8 in, 6mm x 7mm, 8mm x 9mm, 10mm x 11mm, 12mm x 13mm, 14mm x 15mm, 16mm x 17mm, 18mm x 19mm, 20mm x 22mm, 21mm x 23mm, 24mm x 26mm, Pipe Case Iron: 10 in, 14 in, 18 in, Ratcheting Box 12 PT: 1/2 in x 9/16 in, 1/4 in x 5/16 in, 3/4 in x 7/8 in, 3/8 in x 7/16 in, 5/8 in x 11/16 in, 7mm x 8mm, 9mm x 10mm, 11mm x 13mm, 12mm x 14mm, 15mm x 17mm, Ratcheting Flare Nut 12 PT: 1/2 in, 11/16 in, 3/4 in, 3/8 in, 5/8 in, 7/16 in, 9/16 in, Ratcheting Head Micrometer Torque Wrench 50-250 ft-lb, Short Box 12 PT: 1/2 in x 9/16 in, 3/8 in x 7/16 in, 5/16 in x 3/8 in, 5/8 in x 3/4 in, Short Combo 12 PT: 1/4 in, 11/32 in, 3/8 in, 5/16 in, 9/32 in
- 1/2 In. Drive Sockets/Accs. Included
- Crowfoot Flare Nut: 1-1/2 in, 1-1/4 in, 1-1/8 in, 1-11/16 in, 1-13/16 in, 1-3/16 in, 1-3/4 in, 1-3/8 in, 1-5/16 in, 1-5/8 in, 1-7/16 in, 1-7/8 in, 1-9/16 in, Crowfoot Open End: 1 in, 1-1/16 in, 1-1/2 in, 1-1/4 in, 1-1/8 in, 1-11/16 in, 1-13/16 in, 1-3/16 in, 1-3/4 in, 1-3/8 in, 15/16 in, 1-5/16 in, 1-5/8 in, 1-7/16 in, 1-7/8 in, 1-9/16 in, Drag Link: 3/4 in, 15/16 in, Extension Impact: 2 in, 5 in, Extension Locking: 10 in, Extension: 2-1/2 in, Extension: 2-1/2 in, 5 in, 10 in, Handle Hinge: 18-5/8 in, Handle Speed, Ratchet Adapter, Ratchet Classic Pear Head, Ratchet Flex Head, Ratchet Long Classic Pear Head, Socket 12 PT: 1 in, 1/2 in, 11/16 in, 1-1/16 in, 1-1/2 in, 1-1/4 in, 1-1/8 in, 13/16 in, 1-3/16 in, 1-3/8 in, 15/16 in, 1-5/16 in, 1-7/16 in, 19/32 in, 25/32 in, 29/32 in, 3/4 in, 3/8 in, 5/8 in, 7/16 in, 7/8 in, 9/16 in, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, Socket 8 PT: 1 in, 1/2 in, 11/16 in, 13/16 in, 3/4 in, 3/8 in, 5/8 in, 7/16 in, 7/8 in, 9/16 in, Socket Clip, Socket Deep 12 PT: 1 in, 1/2 in, 11/16 in, 1-1/16 in, 1-1/4 in, 1-1/8 in, 13/16 in, 15/16 in, 3/4 in, 5/8 in, 7/8 in, 9/16 in, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, Socket Hex Bit: 1/2 in, 1/4 in, 3/8 in, 5/16 in, 5/8 in, 7/16 in, 9/16 in, 12mm, 14mm, 17mm, Socket Impact 6 PT: 1 in, 1/2 in, 11/16 in, 1-1/16 in, 1-1/4 in, 1-1/8 in, 13/16 in, 1-3/16 in, 3/4 in, 3/8 in, 5/8 in, 7/16 in, 7/8 in, 9/16 in, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, Socket Impact Deep 6 PT: 1 in, 1/2 in, 11/16 in, 1-1/16 in, 1-1/2 in, 1-1/4 in, 1-1/8 in, 13/16 in, 1-3/16 in, 1-3/8 in, 15/16 in, 1-5/16 in, 1-7/16 in, 3/4 in, 3/8 in, 5/8 in, 7/16 in, 7/8 in, 9/16 in, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, Socket Impact Hex Bit: 1/2 in, 1/4 in, 3/8 in, 5/16 in, 5/8 in, 7/16 in, 9/16 in, Universal Joint, Universal Socket: 1/2 in, 5/8 in, 9/16 in,
Dimensions
- Drive Size
- 1/4 in, 3/8 in, 1/2 in, 3/4 in, 1 in
- For Fastener Sizes
- 1/16 in to 2 3/8 in, 2 mm to 24 mm
- Drive Size1
- 1/4 in; 3/8 in; 1/2 in; 3/4 in
Description
469 - Sockets and Accessories240 - Wrenches42 - Striking and Struck Tools32 - Pliers, 111 Screwdrivers 152 - Miscellaneous Tools
1046 pieces.
1/4", 3/8", 1/2", 3/4" drive tools.
Additional Features:
- Designed for fastener sizes 1/16" - 2-3/8", 2 mm - 24 mm.
- Tools only.
- Modules contained: JCS-MAS-1, JCS-MAS-2, JCS-MAS-3, JCS-MAS-4, JCS-MAS-5, JCS-MAS-6, JCS-MOD1046.
- Enhanced version of Proto® J99950 Master Technician Maintenance Set.
Restrictions
WARNING:
Cancer and Reproductive Harm
For more information go to
www.P65Warnings.ca.gov
Ratings & reviews
3 reasons you can count on us
Supplies for every job.
13 million items and the exact one you need.
When you need it fast, count on Zoro!
4.5 million products ship in 1 day.
Stretch your budget further.
Everyday low prices on the brands you love.
You may also like