3/4 in. Threaded Drip Irrigation Pressure Regulator 1 pk

Did you know the water pressure from a typical water source can be excessive for a drip irrigation system? This leads to emitters and fittings popping off, and the strain can damage your drip system. Put a pressure regulator in place to lower the incoming water pressure and keep it at a constant rate-even when the water pressure varies. This pressure regulator is preset at 15 PSI and has a 3/4 in. FPT inlet and outlet. Connects to sprinkler and drip irrigation systems. Made of high-impact acrylonitrile butadiene styrene (ABS) treated with UV inhibitors.

• • Lowers incoming water pressure from a water source for optimal performance of your drip system; Works with a sprinkler or drip irrigation system
• • Attach to an existing underground irrigation system with 3/4 in. MPT connection point; position arrow on device in direction of water flow; connect 3/4 in. FPT outlet to 3/4 in. MPT pipe or fitting
• • Attach the pressure regulator inlet to an existing underground irrigation system with a 3/4 in. MPT connection point; outlet to 3/4 in. MPT pipe or fitting
• • Regulates water pressure from water source; preset at 15 PSI, ideal for most drip irrigation systems; Use the directional arrow on the device to position in the direction of water flow; Maintains 15 PSI
• • Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling
• •