For 1/4 in. Tubing Drip Irrigation Tubing Stake 13 in. H 2 pk

Provide lift to a sprinkler, sprayer, or jet with the 13 in. Sprinkler Stake with 8 in. Adjustable Riser. Simply install a low-flow emitter with 1/4 in. barbed inlet or 10-32 threaded inlet to the top of the riser, and adjust height of the riser to your preference by moving it up or down on the snap-fit clamp. Connect 1/4 in. supply tubing to the1/4 in. barbed inlet at the bottom of the rigid riser; then place stake into ground for overhead watering where you want it. The riser is made of polyethylene and the stake is made of ABS, both treated with UV inhibitors.

• • Adds height to sprinkler, sprayer, or jet to provide plants with overhead irrigation; stake positions and secures emitter in place
• • Use with sprinkler, sprayer, or jet to water flower beds, planting beds, vegetable gardens, trees, shrubs, and container plants
• • Supply tubing to inlet on bottom of riser; position the height of the riser, and insert stake into the ground; Use with a low-flow sprinkler, sprayer, or jet emitter
• • Riser can be lowered or elevated to your preferred height; Barbed inlet on riser delivers water to emitter attached to riser
• • Removable and reusable when you want to move or change your drip tubing layout
• • Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion