2,000+ Results for PERLE SYSTEMS - Page 18
Mfr # 07013470
Key Features:
- Standards: IEEE 802.3
- Dual Power Input: 12/24/48 VDC
- Access Ports: Shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft)
Mfr # 29045978
Key Features:
- Width: 0.9"
- Height: 3.9"
- Depth: 3.5"
Mfr # 05062120
Key Features:
- Fiber link 1 / Receive activity (LK1): This green LED is operational only when power is applied. The LED is on when the 100Base-X link is on and flashes with a 50% duty cycle when data is received.
- Operating Humidity: 5% to 90% non-condensing
- Card insertion and removal: Captive thumb screws enable fast insertion and removal. Can be further tighten with a screwdriver.
Mfr # 07014680
Key Features:
- Standards: IEEE 802.3
- Dual Power Input: 12/24/48 VDC
- Access Ports: Shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft)
Mfr # 07014010
Key Features:
- Standards: IEEE 802.3
- Dual Power Input: 12/24/48 VDC
- Access Ports: Shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft)
Mfr # 07013990
Key Features:
- Standards: IEEE 802.3
- Dual Power Input: 12/24/48 VDC
- Access Ports: Shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft)
Mfr # 05051840
Key Features:
- Edge Connecter: 32 pin DIN 41612 / IEC 60603-2 Type B/2 Male. Fist make, last break for ground and power
- Storage Humidity: 5% to 95% non-condensing
- Fiber Fault Alert: The Fiber Fault Alert switch has meaning when Auto-Negotiation is disabled; Enabled (Default - Up); When the 1000Base-X receiver is off the 1000Base-X transmitter is turned off. Periodically the 1000Base-X receiver will be turned on for a short period to allow the condition to clear if the 1000Base-X link partner is using a similar feature; Disabled (Down)
Mfr # 05050844
Key Features:
- Depth: 3.1 in
- Height: 1 in
- Width: 4.7 in
Mfr # 05051310
Key Features:
- Fiber Optic Cable: Single mode dual SC Media Converters; Multimode: 62.5 / 125, 50/125, 85/125, 100/140 micron; Single Mode: 9/125 micron (ITU-T 625)
- Auto-Negotiation (802.3u): Enabled (Default)- The media converter uses 802.3u Auto-negotiation on the 100Base-TX interface. It is set to advertise full duplex; Disabled- The media converter sets the 100Base-TX port to full duplex.
- Card insertion and removal: Captive thumb screws enable fast insertion and removal. Can be further tighten with a screwdriver.
Mfr # 04031250
Key Features:
- Color: Black
- Adapter Type: RJ-45
- Product Type: Network Adapter
Mfr # 05051580
Key Features:
- Size: Maximum frame size of 2048 bytes
- Operating Humidity: 5% to 90% non-condensing
- Remote Loopback: The media converter can perform a loopback on the 100Base-X fiber interface; Disabled (Default - Up); Enabled- The 100Base-X receiver is looped to the 100Base-X transmitter. The 100Base-TX transmitter is taken off the interface.
Mfr # 29029968
Key Features:
- Depth: 3.3"
- Width: 2.2"
- Height: 3.5"
Mfr # 05052310
Key Features:
- Power / TST: This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink when in Loopback test mode.
- Remote Loopback: The media converter can perform a loopback on the 100Base-X fiber interface; Disabled (Default - Up); Enabled- The 100Base-X receiver is looped to the 100Base-X transmitter. The 100Base-TX transmitter is taken off the interface.
- Fiber Optic Cable: Single mode dual SC Media Converters; Multimode: 62.5 / 125, 50/125, 85/125, 100/140 micron; Single Mode: 9/125 micron (ITU-T 625)
Mfr # 05062140
Key Features:
- Immunity: EN55024
- Edge Connecter: 32 pin DIN 41612 / IEC 60603-2 Type B/2 Male. Fist make, last break for ground and power
- Link Pass Through: Enabled (Default)- When the state of the receiver is changed on one of the 100Base-X interfaces it is reflected on the other 100Base-X fiber transmitter; When a Far-End Fault Indication is received on the fiber interface the 100Base-TX transmitter is turned off. When the Far-End Fault Indication is cleared the transmitter is turned back on; If disabled, the 100Base-X fiber interfaces operate independently. Far-End Fault indication on the 100Base-FX fiber interface has no effect on the other interface.
Mfr # 05070244
Key Features:
- Power Connector: 5.5mm x 9.5mm x 2.1mm barrel socket
- Universal AC/DC adapter: 100-240v AC, regulated DC adapter included
- Electrical Safety: UL 60950-1
Mfr # 05052020
Key Features:
- Fiber Optic Cable Standard: 50/125 µm, 62.5/125 µm
- Number of LC Ports: 1
- Compatibility: Perle Media Converter Chassis
Mfr # 05051340
Key Features:
- Laser Safety: EN 60825-1:2007
- Maximum Power Consumption ( Watts ): 2
- Remote Loopback: The media converter can perform a loopback on the 100Base-X fiber interface; Disabled (Default - Up); Enabled- The 100Base-X receiver is looped to the 100Base-X transmitter. The 100Base-TX transmitter is taken off the interface.
Mfr # 05051350
Key Features:
- Edge Connecter: 32 pin DIN 41612 / IEC 60603-2 Type B/2 Male. Fist make, last break for ground and power
- Fiber link on / Receive activity (LKF): This green LED is operational only when power is applied. The LED is on when the 100Base-FX link is on and flashes with a 50% duty cycle when data is received.
- Immunity: EN55024
Mfr # 07013850
Key Features:
- Standards: IEEE 802.3
- Dual Power Input: 12/24/48 VDC
- Access Ports: Shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft)
Mfr # 07010030
Key Features:
- Height: 1.2"
- Depth: 2.8"
- Width: 4.5"
Mfr # 05051180
Key Features:
- Total Number of Ports: 1
- Number of Network (RJ-45) Ports: 1
- Weight (Approximate): 3.52 oz
Mfr # 07011760
Key Features:
- Depth: 4.4"
- Height: 1.4"
- Width: 5.4"
Mfr # 07010120
Key Features:
- Depth: 2.8"
- Width: 4.5"
- Height: 1.2"
Mfr # 28686778
Key Features:
- Depth: 2.4"
- Width: 3.5"
- Height: 3.5"
Mfr # 05050584
Key Features:
- Size: Maximum frame size of 2048 bytes
- Operating Altitude: Up to 3,048 meters (10,000 feet)
- Storage Humidity: 5% to 95% non-condensing
Mfr # 07013950
Key Features:
- Standards: IEEE 802.3
- Access Ports: Shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft)
- Dual Power Input: 12/24/48 VDC
Mfr # 07014280
Key Features:
- Standards: IEEE 802.3
- Dual Power Input: 12/24/48 VDC
- Access Ports: Shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft)
Mfr # 23205138
Key Features:
- Width: 0.7"
- Depth: 2.4"
- Height: 3.5"
Mfr # 05051860
Key Features:
- Laser Safety: EN 60825-1:2007
- Operating temperature: 0° C to 50° C (32° F to 122° F)
- Power / TST: This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink when in Loopback test mode.
Mfr # 29095768
Key Features:
- Width: 1.3"
- Height: 4.2"
- Depth: 3.5"
Mfr # 07013560
Key Features:
- Standards: IEEE 802.3
- Dual Power Input: 12/24/48 VDC
- Access Ports: Shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft)
Mfr # 04031310
Key Features:
- Adapter Type: RJ-45
- Product Type: Network Adapter
- Compatibility: Perle IOLAN SCSC Console Server Models
Mfr # 05061100
Key Features:
- Product Name: C-100MM-S2ST80 Media Converter
- Environmentally Friendly: Yes
- Number of ST Ports: 2
Mfr # 05050444
Key Features:
- Depth: 4.7 in
- Size: Maximum frame size of 2048 bytes
- Width: 3.1 in
Mfr # 05061410
Key Features:
- Power / TST: This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink slowly when in Loopback test mode.
- Heat Output ( BTU/HR ): 8.53
- Electrical Safety: UL 60950-1
Mfr # 29030028
Key Features:
- Height: 3.5"
- Depth: 3.3"
- Width: 2.2"