In-Line Centrifugal Hydronic Circulating Pump, E90 Series, 3 hp, 2 in FNPT, 208-230/460V AC

The BELL & GOSSETT 179307LF is a 3 hp in-line centrifugal hydronic circulating pump rated for use with water. It is a direct-drive, three-phase motor with nameplate voltage 208-230/460V AC, flange connection and FNPT pipe-to-flange/union connection type, and features a flange connection and FNPT pipe-to-flange/union connection type.

Key Features:

• Pump type/series: In-line centrifugal, Series E9034T (Family E90)
• Horsepower: 3 hp
• Electrical: 208-230/460V AC nameplate voltage; Three phase; Amps 8.6 to 8.4/4.2; Number of speeds: 1; Motor enclosure: Open Drip Proof; Motor includes thermal overload protection as indicated on the motor nameplate; Maximum RPM: 3,450
• Drive/mount: Direct drive; In-line pump mount; Mounting orientation: Horizontal or Vertical (per installation instructions)
• Connections/sizes: Inlet/outlet size 2 in; Compatible intake/discharge pipe size 2 in; Connection standard: Flange; Connection type / pipe-to-flange: FNPT; Includes flange and volute
• Flow and head performance: Best efficiency point (BEP): 104 gpm at 53 ft; Maximum flow rate 240 gpm; Max. GPM @ head 215 gpm @ 27 ft; Min. GPM @ head 26 gpm @ 13 ft; Maximum flow @ 30 ft = 209 gpm; @ 40 ft = 173 gpm; @ 50 ft = 124 gpm; Shut-off / maximum feet of head = 57 ft
• Materials and sealing: Pump casing material cast iron; Pump housing bronze fitted; Impeller cast bronze; Shaft 303 stainless steel; Mechanical seal: EPR/Carbon/Silicon Carbide
• Media and pressure ratings: Compatible media: Water; Media temperature range: minimum -10°F, maximum 200°F; Maximum operating/working pressure: 175 psi
• Physical dimensions: Face-to-face dimension 11 1/2 in; Overall length 13.13 in; Overall height 18.75 in; Overall width 8 in
• Additional: Not certified for potable water systems; Standards: NEMA (as specified by the manufacturer)