634 Results for Cutting, Tapping, and Grinding Fluids - Page 2
Key Features:
- Container Size: 5 gal
- Fragrance: Mild Amine
- Series: 690XT
Key Features:
- Promotion Restriction: Not eligible for promotion
- Item: Cooling Oil
- Features: With Extra Pressure Additives
Key Features:
- Container Style: Spray Bottle
- Application: MQL Lubricant for General Machining, Turning, Milling, Sawing, Drilling and Tapping Applications
- Viscosity: 37 cSt
Key Features:
- Standards: OSHA Hazard Communication
- Flash Point: Greater than 200 Degrees F
- Viscosity: 42
Key Features:
- Features: Biodegradable, High Heat Tolerance, Low Smoke, Natural Oil Base
- Standards: NSF H1 Food Grade
- Color: Blue
Key Features:
- Viscosity: 34 cSt @ 100 Degrees F
- Item: Cutting Oil
- Green Certification or Other Recognition: NSF(R) Certified (Sustainability or Environmental Standard)
Key Features:
- Application: For High Speed Spindle, Plain and Anti-friction Bearings in Textile Machines, Precision Grinders and Other Machine Tools
- Flash Point: 212 Degrees C
- Color: Amber
Key Features:
- Container Size: 1 gal
- Physical Form: Liquid
- Container Style: Jug
Key Features:
- Container Size: 5 gal
- Physical Form: Liquid
- Application: Heavy Duty Machining Of All Ferrous Metals And Non-Ferrous Metals, Long Lasting Bio-Resistant With Extreme Pressure Additives
Key Features:
- Container Size: 5 gal
- Fluid Type: Chlorine Free
- Viscosity: 5.7 cSt @ 100 Degrees F
Key Features:
- Application: All Purpose Cleaner For Parts, Tools, Equipment
- Fluid Type: Foaming
- Size: 20 oz.
Key Features:
- Color: Amber
- Flash Point: 216 Degrees C
- Fragrance: Mild Odor
Key Features:
- Container Style: Pail
- For Use With: Lubrication of ball screws, linear guides, headstocks, translating screws, spur and bevel gears, and lightly loaded worm gears.
- Application: QS Way Lube Oils are recommended both as slide way lubricants and as fluids for moderate servicemachine tool hydraulic systems. Miles QS Way Lube Lite ISO 68 is recommended for horizontal slide ways on small to medium size machine tools.
Key Features:
- Fluid Type: Dielectric Fluid
- For Use With: All Metals
- Flash Point: 215 Degrees F
Key Features:
- Color: Clear
- Base Oil: Mineral
- Item: Cutting Oil
Key Features:
- Fluid Type: Biodegradable, Chlorine-Free, NO Active Sulfur, NO Heavy Metals Nonstaining, NO Phosphorus, NO Silicon, NO Zinc, Water Soluble coolant
- For Use With: Ferrous and Non-Ferrous Metal Alloys
- Fragrance: Mild Odor
Key Features:
- Physical Form: Liquid
- For Use With: All Metals
- Standards: Canadian Forces Approval # 18452, Ford Motor Co. TOX # 134612 (all sizes), PPG Glass Co. Approval # 014-598-1000
Key Features:
- Item: Cutting Oil
- Container Size: 16 oz
- Fluid Type: Chlorinated
Key Features:
- Fluid Type: Heavy Duty
- For Use With: Stainless Steel, Carbon Steel, Inconel, Monel, Hastelloy, Titanium, Aluminum and other Alloys and Exotics.
- Fragrance: Wintergreen
Key Features:
- Specific Gravity: 0.92
- Container Size: 1 gal
- Container Type: Bottle
Key Features:
- Features: Chlorine, Except Magnesium; Corrosion Inhibitors Prevent Flash Rusting; Provides Fine Finishes; Cinnamon Scent, Or Oils; Safe On All Metals, Water-Based Formula; Excellent In Applications Where Cooling Of The Tool Is Desired; Non-Flammable; Non-Hazardous; Does Not Contain Sulfur
- Physical Form: Liquid
- Cutting Fluid Sub-Category: Cutting Oils
Key Features:
- Container Size: 5 gal
- Cutting Fluid Sub-Category: Coolants
- Series: SN-100A
Key Features:
- Container Size: 1 gal
- Container Style: Jug
- Application: MQL Lubricant for General Machining, Turning, Milling, Sawing, Drilling and Tapping Applications
Key Features:
- Item: Direct Application Cutting Lubricant
- Flash Point: 350 Degrees F
- Size: 10 oz.
Key Features:
- Cutting Fluid Sub-Category: Cutting Oils
- Flash Point: 300 Degrees F
- Size: 11 oz.
Key Features:
- Flash Point: 350 Degrees F
- Physical Form: Paste
- Container Type: Tube
Key Features:
- Container Size: 5 gal
- Container Style: Pail
- Flash Point: Greater than 212 Degrees F
Key Features:
- Promotion Restriction: Not eligible for promotion
- Overall Height (In.): 13 1/4 in
- Voltage: 120 V
Key Features:
- Container Size: 5 gal
- pH Value: 8.9
- Fragrance: Chemical
Key Features:
- Container Size: 1 gal
- Application: Band and Circular Sawing, Drilling, Grinding, Milling, Tapping
- Standards: No Chlorine, Sulphur, Silicone And Non Carcinogenic
Key Features:
- Viscosity: 68
- Fluid Type: Biodegradable, Chlorine Free, No Active Sulfur, No Heavy Metals and Nonstaining, No Phosphorus, No Silicon, No Zinc
- SAE Grade: Not Specified
Key Features:
- Base Oil: Vegetable Oil
- Viscosity: 31.3 cSt @ 40 Degrees C, 7.3 cSt @ 100 Degrees C
- Container Size: 1 gal
Key Features:
- Container Type: Squeeze Bottle
- Color: Green
- Pipe Threading - Item: Cutting Fluid
About Cutting, Tapping, and Grinding Fluids
Cutting, tapping, and grinding fluids are used in a variety of industries to help reduce friction, heat buildup, and wear on metalworking tools. These fluids can be used to lubricate cutting tools and surfaces while also providing cooling properties that can help prevent the formation of chips or burrs during machining operations.
Types of Cutting, Tapping, and Grinding Fluids
Cutting fluids come in a range of types including water-soluble oils, straight oils, semi-synthetic products, synthetic products, and misting systems. Each type of fluid has its own unique characteristics that make it suitable for specific applications such as tapping or grinding. For example, water-soluble oils provide better cooling than straight oils but may not offer the same protection against corrosion.
How Cutting, Tapping, and Grinding Fluids are Made
Cutting fluids are typically made up of a base oil combined with emulsifiers or surfactants to create an emulsion. Additives such as corrosion inhibitors or extreme pressure additives may also be added to enhance performance. The ingredients are blended together using specialized equipment before being tested for quality assurance.
Industries that use Cutting, Tapping, and Grinding Fluids
Cutting fluids are commonly used in manufacturing industries such as automotive production lines where they are applied directly onto parts prior to machining operations. They can also be used in welding processes where they provide lubrication between two surfaces being joined together by heat. In addition to this they can also be used for general purpose lubrication when drilling holes into metals.
Find the Cutting, Tapping, And Grinding Fluids You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of cutting, tapping, and grinding fluids, along with other tools or equipment to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time.
Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.