A38 V-Belt, 40" Outside Length, 1/2" Top Width, 1 Ribs, 5/16" Thick, 3X545

The DAYTON - 3X545 is a Classical V-Belt, a mechanical device used in power transmission applications. This belt is intended for the transfer of power between rotating shafts, typically found in industrial machinery or heavy-duty vehicles. It's constructed from gum rubber with a fabric cover and polyester cords, constructed with the intention to handle varying torque levels.

Key Features of the DAYTON - 3X545 Classical V-Belt:

• Belt Material: The belt is constructed from gum rubber with a fabric cover and polyester reinforcing cords, which are materials typically associated with durability and potential resistance to certain environmental factors like heat or chemicals.
• Operating Temperature Range: With an operating temperature range of -22 Degrees F to 194 Degrees F, this belt is rated for operation within these specified ranges.
• Number of Ribs: The single rib present in the V-belt aims at enhancing grip potentially leading towards even distribution of load.
• Outside Length & Top Width: With an outside length of 40 inches and top width measurement of half an inch, these dimensions should be considered when determining fit within specific industrial machinery or commercial equipment systems.
• V-Belt Section & Type: This classical type V-Belt suggests potential compatibility with certain types of machinery that could assist professionals in selecting a suitable belt for their mechanical applications.